| menu "Console options" |
| |
| # TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. |
| config CONSOLE_SERIAL8250 |
| bool "Serial port console output" |
| default y |
| help |
| Send coreboot debug output to a serial port console. |
| |
| choice |
| prompt "Serial port" |
| default CONSOLE_SERIAL_COM1 |
| depends on CONSOLE_SERIAL8250 |
| |
| config CONSOLE_SERIAL_COM1 |
| bool "COM1/ttyS0, I/O port 0x3f8" |
| help |
| Serial console on COM1/ttyS0 at I/O port 0x3f8. |
| config CONSOLE_SERIAL_COM2 |
| bool "COM2/ttyS1, I/O port 0x2f8" |
| help |
| Serial console on COM2/ttyS1 at I/O port 0x2f8. |
| config CONSOLE_SERIAL_COM3 |
| bool "COM3/ttyS2, I/O port 0x3e8" |
| help |
| Serial console on COM3/ttyS2 at I/O port 0x3e8. |
| config CONSOLE_SERIAL_COM4 |
| bool "COM4/ttyS3, I/O port 0x2e8" |
| help |
| Serial console on COM4/ttyS3 at I/O port 0x2e8. |
| |
| endchoice |
| |
| config TTYS0_BASE |
| hex |
| depends on CONSOLE_SERIAL8250 |
| default 0x3f8 if CONSOLE_SERIAL_COM1 |
| default 0x2f8 if CONSOLE_SERIAL_COM2 |
| default 0x3e8 if CONSOLE_SERIAL_COM3 |
| default 0x2e8 if CONSOLE_SERIAL_COM4 |
| help |
| Map the COM port names to the respective I/O port. |
| |
| choice |
| prompt "Baud rate" |
| default CONSOLE_SERIAL_115200 |
| depends on CONSOLE_SERIAL8250 |
| |
| config CONSOLE_SERIAL_115200 |
| bool "115200" |
| help |
| Set serial port Baud rate to 115200. |
| config CONSOLE_SERIAL_57600 |
| bool "57600" |
| help |
| Set serial port Baud rate to 57600. |
| config CONSOLE_SERIAL_38400 |
| bool "38400" |
| help |
| Set serial port Baud rate to 38400. |
| config CONSOLE_SERIAL_19200 |
| bool "19200" |
| help |
| Set serial port Baud rate to 19200. |
| config CONSOLE_SERIAL_9600 |
| bool "9600" |
| help |
| Set serial port Baud rate to 9600. |
| |
| endchoice |
| |
| config TTYS0_BAUD |
| int |
| default 115200 if CONSOLE_SERIAL_115200 |
| default 57600 if CONSOLE_SERIAL_57600 |
| default 38400 if CONSOLE_SERIAL_38400 |
| default 19200 if CONSOLE_SERIAL_19200 |
| default 9600 if CONSOLE_SERIAL_9600 |
| help |
| Map the Baud rates to an integer. |
| |
| # TODO: Allow user-friendly selection of settings other than 8n1. |
| config TTYS0_LCS |
| int |
| default 3 |
| depends on CONSOLE_SERIAL8250 |
| |
| # TODO: FIX DEPENDENCY HERE |
| config USBDEBUG_DIRECT |
| bool "USB 2.0 EHCI debug dongle support" |
| default n |
| help |
| This option allows you to use a so-called USB EHCI Debug device |
| to retrieve the coreboot debug messages (instead, or in addition |
| to, a serial port). |
| |
| This feature is NOT supported on all chipsets in coreboot! |
| |
| It also requires a USB2 controller which supports the EHCI |
| Debug Port capability. Controllers which are known to work: |
| |
| * 10b9:5239 ALi Corporation USB 2.0 (USB PCI card) |
| * 8086:24cd Intel ICH4/ICH4-M |
| * 8086:24dd Intel ICH5 |
| * 8086:265c Intel ICH6 |
| * 8086:268c Intel 631xESB/632xESB/3100 |
| * 8086:27cc Intel ICH7 |
| * 8086:2836 Intel ICH8 |
| * 8086:283a Intel ICH8 |
| * 8086:293a Intel ICH9 |
| * 10de:0088 NVIDIA MCP2A |
| * 10de:005b NVIDIA CK804 |
| * 10de:026e NVIDIA MCP51 |
| * 10de:036d NVIDIA MCP55 |
| * 10de:03f2 NVIDIA MCP61 |
| * 1002:4386 ATI/AMD SB600 |
| * 1106:3104 VIA VX800 |
| |
| See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list. |
| |
| config CONSOLE_VGA |
| bool "Use VGA console once initialized" |
| default n |
| |
| # TODO: Deps? |
| # TODO: Improve description. |
| config CONSOLE_VGA_ONBOARD_AT_FIRST |
| bool "Use onboard VGA as primary video device" |
| default n |
| help |
| If not selected, the last adapter found will be used. |
| |
| choice |
| prompt "Maximum console log level" |
| default MAXIMUM_CONSOLE_LOGLEVEL_8 |
| |
| config MAXIMUM_CONSOLE_LOGLEVEL_8 |
| bool "8: SPEW" |
| help |
| Way too many details. |
| config MAXIMUM_CONSOLE_LOGLEVEL_7 |
| bool "7: DEBUG" |
| help |
| Debug-level messages. |
| config MAXIMUM_CONSOLE_LOGLEVEL_6 |
| bool "6: INFO" |
| help |
| Informational messages. |
| config MAXIMUM_CONSOLE_LOGLEVEL_5 |
| bool "5: NOTICE" |
| help |
| Normal but significant conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_4 |
| bool "4: WARNING" |
| help |
| Warning conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_3 |
| bool "3: ERR" |
| help |
| Error conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_2 |
| bool "2: CRIT" |
| help |
| Critical conditions. |
| config MAXIMUM_CONSOLE_LOGLEVEL_1 |
| bool "1: ALERT" |
| help |
| Action must be taken immediately. |
| config MAXIMUM_CONSOLE_LOGLEVEL_0 |
| bool "0: EMERG" |
| help |
| System is unusable. |
| |
| endchoice |
| |
| config MAXIMUM_CONSOLE_LOGLEVEL |
| int |
| default 0 if MAXIMUM_CONSOLE_LOGLEVEL_0 |
| default 1 if MAXIMUM_CONSOLE_LOGLEVEL_1 |
| default 2 if MAXIMUM_CONSOLE_LOGLEVEL_2 |
| default 3 if MAXIMUM_CONSOLE_LOGLEVEL_3 |
| default 4 if MAXIMUM_CONSOLE_LOGLEVEL_4 |
| default 5 if MAXIMUM_CONSOLE_LOGLEVEL_5 |
| default 6 if MAXIMUM_CONSOLE_LOGLEVEL_6 |
| default 7 if MAXIMUM_CONSOLE_LOGLEVEL_7 |
| default 8 if MAXIMUM_CONSOLE_LOGLEVEL_8 |
| help |
| Map the log level config names to an integer. |
| |
| choice |
| prompt "Default console log level" |
| default DEFAULT_CONSOLE_LOGLEVEL_8 |
| |
| config DEFAULT_CONSOLE_LOGLEVEL_8 |
| bool "8: SPEW" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8) |
| help |
| Way too many details. |
| config DEFAULT_CONSOLE_LOGLEVEL_7 |
| bool "7: DEBUG" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7) |
| help |
| Debug-level messages. |
| config DEFAULT_CONSOLE_LOGLEVEL_6 |
| bool "6: INFO" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6) |
| help |
| Informational messages. |
| config DEFAULT_CONSOLE_LOGLEVEL_5 |
| bool "5: NOTICE" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5) |
| help |
| Normal but significant conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_4 |
| bool "4: WARNING" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4) |
| help |
| Warning conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_3 |
| bool "3: ERR" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3) |
| help |
| Error conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_2 |
| bool "2: CRIT" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_2) |
| help |
| Critical conditions. |
| config DEFAULT_CONSOLE_LOGLEVEL_1 |
| bool "1: ALERT" |
| depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\ |
| MAXIMUM_CONSOLE_LOGLEVEL_2 || MAXIMUM_CONSOLE_LOGLEVEL_1) |
| help |
| Action must be taken immediately. |
| config DEFAULT_CONSOLE_LOGLEVEL_0 |
| bool "0: EMERG" |
| help |
| System is unusable. |
| |
| endchoice |
| |
| config DEFAULT_CONSOLE_LOGLEVEL |
| int |
| default 0 if DEFAULT_CONSOLE_LOGLEVEL_0 |
| default 1 if DEFAULT_CONSOLE_LOGLEVEL_1 |
| default 2 if DEFAULT_CONSOLE_LOGLEVEL_2 |
| default 3 if DEFAULT_CONSOLE_LOGLEVEL_3 |
| default 4 if DEFAULT_CONSOLE_LOGLEVEL_4 |
| default 5 if DEFAULT_CONSOLE_LOGLEVEL_5 |
| default 6 if DEFAULT_CONSOLE_LOGLEVEL_6 |
| default 7 if DEFAULT_CONSOLE_LOGLEVEL_7 |
| default 8 if DEFAULT_CONSOLE_LOGLEVEL_8 |
| help |
| Map the log level config names to an integer. |
| |
| config CONSOLE_BTEXT |
| bool |
| default n |
| |
| config CONSOLE_SROM |
| bool |
| default n |
| |
| config CONSOLE_LOGBUF |
| bool |
| default n |
| |
| config NO_POST |
| bool "Don't show any POST codes" |
| default n |
| |
| config SERIAL_POST |
| bool "Show POST codes on the serial port console" |
| depends on CONSOLE_SERIAL8250 && !NO_POST |
| default n |
| help |
| If enabled, coreboot will additionally print POST codes (which are |
| usually displayed using a so-called "POST card" ISA/PCI/PCI-E |
| device) on the serial console. |
| |
| endmenu |
| |