## SPDX-License-Identifier: GPL-2.0-only

chip northbridge/intel/sandybridge
	register "usb_port_config" = "{
		{1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
		{1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
		{1, 6, 0x0080}, {1, 5, 0x0080}, {0, 5, 0x0080}, {0, 6, 0x0080}
		}"
	device domain 0 on
		subsystemid 0x1043 0x84ca inherit
		chip southbridge/intel/bd82x6x
			register "gen1_dec" = "0x000c0291"
			register "gen4_dec" = "0x0000ff29"
			register "pcie_port_coalesce" = "true"
			register "usb_port_config" = "{
				{1, 2, 0},
				{1, 2, 0},
				{1, 2, 1},
				{1, 2, 1},
				{1, 2, 2},
				{1, 2, 2},
				{1, 2, 3},
				{1, 2, 3},
				{1, 2, 4},
				{1, 2, 4},
				{1, 2, 6},
				{1, 2, 5},
				{0, 2, 5},
				{0, 2, 6}
			}"

			device ref pcie_rp1 on  end	# PCIEX_16_3
			device ref pcie_rp2 on  end	# RTL8111F
			device ref pcie_rp3 off end
			device ref pcie_rp4 off end
			device ref pcie_rp5 off end
			device ref pcie_rp6 on  end	# ASM1042 USB3
			device ref pcie_rp7 on  end	# ASM1061 eSATA
			device ref pcie_rp8 off end

			device ref lpc on
				chip superio/nuvoton/nct6779d
					device pnp 2e.1 off end	# Parallel
					device pnp 2e.2 off end	# UART A
					device pnp 2e.3 on	# UART B, IR
						io 0x60 = 0x2f8		# COM2 address
					end
					device pnp 2e.5 on	# PS2 KBC
						io  0x60 = 0x0060	# KBC1 base
						io  0x62 = 0x0064	# KBC2 base
						irq 0x70 = 1		# Keyboard IRQ
						irq 0x72 = 12		# Mouse IRQ

						# KBC 12Mhz/A20 speed/sw KBRST
						drq 0xf0 = 0x82
					end
					device pnp 2e.6 off end	# CIR
					device pnp 2e.7 on  end	# GPIOs 6-8
					device pnp 2e.8 off end	# WDT1 GPIO 0-1
					device pnp 2e.9 off end	# GPIO 1-8
					device pnp 2e.a on	# ACPI
						drq 0xe4 = 0x10	# Enable 3VSBS to power RAM on S3
						drq 0xe7 = 0x10	# 0.5s S3 delay for compatibility
					end
					device pnp 2e.b off end	# HWM, LED
					device pnp 2e.d off end	# WDT1
					device pnp 2e.e off end	# CIR wake-up
					device pnp 2e.f on	# GPIO PP/OD
						drq 0xe6 = 0x7f	# GP7 PP
					end
					device pnp 2e.14 on end	# Port 80 UART
					device pnp 2e.16 off end	# Deep sleep
				end
				chip drivers/pc80/tpm
					device pnp 4e.0 on end	# TPM
				end
			end
		end
	end
end