nb/sandybridge,sb/bd82x6x: Configure USB from southbridge devicetree
Transfer all USB responsibilities to southbridge/intel/bd82x6x,
using one set of USB port configuration supplied by mainboards
in the southbridge section of their devicetree.
For MRC raminit, export southbridge_fill_pei_data() as a hook for
southbridge code to implement. With new code via this hook, bd82x6x
fills pei_data based on this one set of USB port config.
For native raminit, early_usb_init() now goes directly to the devicetree
and no longer get passed an address to it.
TEST=abuild passes for all affected boards. All USB ports still work
on asus/p8x7x-series/v/p8z77-m.
Change-Id: I38378c7ee0701abc434b030dd97873f2af63e6b0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81881
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/southbridge/intel/bd82x6x/early_usb.c b/src/southbridge/intel/bd82x6x/early_usb.c
index 6c21cf7..7bca0bb 100644
--- a/src/southbridge/intel/bd82x6x/early_usb.c
+++ b/src/southbridge/intel/bd82x6x/early_usb.c
@@ -8,8 +8,9 @@
#include <southbridge/intel/common/pmbase.h>
#include "pch.h"
+#include "chip.h"
-void early_usb_init(const struct southbridge_usb_port *portmap)
+void early_usb_init(void)
{
u32 reg32;
const u32 rcba_dump[8] = {
@@ -23,6 +24,9 @@
USBIR_TXRX_GAIN_DESKTOP6_LOW, USBIR_TXRX_GAIN_DESKTOP6_HIGH,
USBIR_TXRX_GAIN_DESKTOP7_LOW, USBIR_TXRX_GAIN_DESKTOP7_MED,
0x20000053, 0x2000055f, 0x20000f5f};
+ const struct device *dev = pcidev_on_root(0x1d, 0);
+ const struct southbridge_intel_bd82x6x_config *config = dev->chip_info;
+ const struct southbridge_usb_port *portmap = config->usb_port_config;
int i;
/* Unlock registers. */
diff --git a/src/southbridge/intel/bd82x6x/early_usb_mrc.c b/src/southbridge/intel/bd82x6x/early_usb_mrc.c
index f60cc0b..bf43e26 100644
--- a/src/southbridge/intel/bd82x6x/early_usb_mrc.c
+++ b/src/southbridge/intel/bd82x6x/early_usb_mrc.c
@@ -3,6 +3,8 @@
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include "pch.h"
+#include "chip.h"
+#include <northbridge/intel/sandybridge/pei_data.h>
#define PCH_EHCI1_TEMP_BAR0 0xe8000000
#define PCH_EHCI2_TEMP_BAR0 0xe8000400
@@ -29,3 +31,63 @@
PCH_EHCI2_TEMP_BAR0);
pci_or_config16(usb1, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
}
+
+/*
+ * Translate coreboot native USB port configuration in devicetree
+ * into a format reference code expects:
+ *
+ * [MRC index] = .native_field // what for
+ * [0] = .enabled // enable
+ * [1] = .oc_pin // overcurrent pin
+ * [2] = .current // length
+ *
+ * For .current, use these native values for MRC settings 1-3, corresponding
+ * to values of 0x40/0x80/0x130, which should produce the correct values
+ * across all supported PCHs.
+ *
+ * PCH type | 1 | 2 | 3
+ * ------------+---+---+---
+ * Mobile | 0 | 1 | 2
+ * Desktop x6x | 6 | 1 | 7
+ * Desktop x7x | 8 | 9 | 2
+ *
+ * See also:
+ * northbridge/intel/sandybridge/pei_data.h
+ * pch.h
+ * early_usb.c
+ */
+void southbridge_fill_pei_data(struct pei_data *pei_data)
+{
+ const struct device *dev = pcidev_on_root(0x1d, 0);
+ const struct southbridge_intel_bd82x6x_config *config = dev->chip_info;
+ /* Native current -> MRC length map to get the same USBIRx register value */
+ const uint16_t currents[] = { 0x40, 0x80, 0x130,
+ 0, 0, 0, /* 3-5 not seen in MRC */
+ 0x40, 0x130, 0x40, 0x80};
+ for (unsigned int port = 0; port < ARRAY_SIZE(config->usb_port_config); port++) {
+ uint16_t current = 0;
+ int ocp = config->usb_port_config[port].oc_pin;
+ if (ocp == -1)
+ ocp = (port < 8) ? 0 : 4;
+
+ if (config->usb_port_config[port].current < ARRAY_SIZE(currents))
+ current = currents[config->usb_port_config[port].current];
+
+ /*
+ * Note for developers: If this message shows, your board uses a
+ * current setting MRC.bin cannot produce. Choose a value as close
+ * as possible and test all USB ports, or consider using native raminit.
+ */
+ if (current == 0) {
+ printk(BIOS_NOTICE,
+ "%s: USB%02d: %d is an invalid setting for MRC.bin!\n",
+ __func__, port, config->usb_port_config[port].current);
+ }
+
+ pei_data->usb_port_config[port][0] = config->usb_port_config[port].enabled;
+ pei_data->usb_port_config[port][1] = ocp;
+ pei_data->usb_port_config[port][2] = current;
+ }
+
+ pei_data->usb3.hs_port_switch_mask = config->xhci_switchable_ports;
+}
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h
index f2f02b3..8924dca 100644
--- a/src/southbridge/intel/bd82x6x/pch.h
+++ b/src/southbridge/intel/bd82x6x/pch.h
@@ -64,7 +64,7 @@
void pch_enable(struct device *dev);
extern const struct southbridge_usb_port mainboard_usb_ports[14];
-void early_usb_init(const struct southbridge_usb_port *portmap);
+void early_usb_init(void);
/* PCI Configuration Space (D30:F0): PCI2PCI */
#define PSTS 0x06