| #include <console/console.h> |
| #include <arch/pirq_routing.h> |
| #include <string.h> |
| #include <device/pci.h> |
| |
| #ifndef CONFIG_IRQ_SLOT_COUNT |
| #warning "CONFIG_IRQ_SLOT_COUNT is not defined. PIRQ won't work correctly." |
| #endif |
| |
| #if CONFIG_DEBUG |
| static void check_pirq_routing_table(struct irq_routing_table *rt) |
| { |
| uint8_t *addr = (uint8_t *)rt; |
| uint8_t sum=0; |
| int i; |
| |
| printk_info("Checking Interrupt Routing Table consistency...\n"); |
| |
| if (sizeof(struct irq_routing_table) != rt->size) { |
| printk_warning("Inconsistent Interrupt Routing Table size (0x%x/0x%x).\n", |
| sizeof(struct irq_routing_table), |
| rt->size |
| ); |
| rt->size=sizeof(struct irq_routing_table); |
| } |
| |
| for (i = 0; i < rt->size; i++) |
| sum += addr[i]; |
| |
| printk_debug("%s(): Interrupt Routing Table located at %p.\n", |
| __func__, addr); |
| |
| |
| sum = rt->checksum - sum; |
| |
| if (sum != rt->checksum) { |
| printk_warning("Interrupt Routing Table checksum is: 0x%02x but should be: 0x%02x.\n", |
| rt->checksum, sum); |
| rt->checksum = sum; |
| } |
| |
| if (rt->signature != PIRQ_SIGNATURE || rt->version != PIRQ_VERSION || |
| rt->size % 16 ) { |
| printk_warning("Interrupt Routing Table not valid.\n"); |
| return; |
| } |
| |
| sum = 0; |
| for (i=0; i<rt->size; i++) |
| sum += addr[i]; |
| |
| /* We're manually fixing the checksum above. This warning can probably |
| * never happen because if the target location is read-only this |
| * function would have bailed out earlier. |
| */ |
| if (sum) { |
| printk_warning("Checksum error in Interrupt Routing Table " |
| "could not be fixed.\n"); |
| } |
| |
| printk_info("done.\n"); |
| } |
| |
| static int verify_copy_pirq_routing_table(unsigned long addr) |
| { |
| int i; |
| uint8_t *rt_orig, *rt_curr; |
| |
| rt_curr = (uint8_t*)addr; |
| rt_orig = (uint8_t*)&intel_irq_routing_table; |
| printk_info("Verifing copy of Interrupt Routing Table at 0x%08x... ", addr); |
| for (i = 0; i < intel_irq_routing_table.size; i++) { |
| if (*(rt_curr + i) != *(rt_orig + i)) { |
| printk_info("failed\n"); |
| return -1; |
| } |
| } |
| printk_info("done\n"); |
| |
| check_pirq_routing_table((struct irq_routing_table *)addr); |
| |
| return 0; |
| } |
| #endif |
| |
| unsigned long copy_pirq_routing_table(unsigned long addr) |
| { |
| /* Align the table to be 16 byte aligned. */ |
| addr += 15; |
| addr &= ~15; |
| |
| /* This table must be betweeen 0xf0000 & 0x100000 */ |
| printk_info("Copying Interrupt Routing Table to 0x%08lx... ", addr); |
| memcpy((void *)addr, &intel_irq_routing_table, intel_irq_routing_table.size); |
| printk_info("done.\n"); |
| #if CONFIG_DEBUG |
| verify_copy_pirq_routing_table(addr); |
| #endif |
| pirq_routing_irqs(addr); |
| return addr + intel_irq_routing_table.size; |
| } |
| |
| #if CONFIG_PIRQ_ROUTE |
| void pirq_routing_irqs(unsigned long addr) |
| { |
| int i, j, k, num_entries; |
| unsigned char irq_slot[4]; |
| unsigned char pirq[4] = {0, 0, 0, 0}; |
| struct irq_routing_table *pirq_tbl; |
| device_t pdev; |
| |
| pirq_tbl = (struct irq_routing_table *)(addr); |
| num_entries = (pirq_tbl->size - 32) / 16; |
| |
| /* Set PCI IRQs. */ |
| for (i = 0; i < num_entries; i++) { |
| |
| printk_debug("PIRQ Entry %d Dev/Fn: %X Slot: %d\n", i, |
| pirq_tbl->slots[i].devfn >> 3, pirq_tbl->slots[i].slot); |
| |
| for (j = 0; j < 4; j++) { |
| |
| int link = pirq_tbl->slots[i].irq[j].link; |
| int bitmap = pirq_tbl->slots[i].irq[j].bitmap; |
| int irq = 0; |
| |
| printk_debug("INT: %c link: %x bitmap: %x ", |
| 'A' + j, link, bitmap); |
| |
| if (!bitmap|| !link || link > 4) { |
| |
| printk_debug("not routed\n"); |
| irq_slot[j] = irq; |
| continue; |
| } |
| |
| /* yet not routed */ |
| if (!pirq[link - 1]) { |
| |
| for (k = 2; k <= 15; k++) { |
| |
| if (!((bitmap >> k) & 1)) |
| continue; |
| |
| irq = k; |
| |
| /* yet not routed */ |
| if (pirq[0] != irq && pirq[1] != irq && pirq[2] != irq && pirq[3] != irq) |
| break; |
| } |
| |
| if (irq) |
| pirq[link - 1] = irq; |
| } |
| else |
| irq = pirq[link - 1]; |
| |
| printk_debug("IRQ: %d\n", irq); |
| irq_slot[j] = irq; |
| } |
| |
| /* Bus, device, slots IRQs for {A,B,C,D}. */ |
| pci_assign_irqs(pirq_tbl->slots[i].bus, |
| pirq_tbl->slots[i].devfn >> 3, irq_slot); |
| } |
| |
| printk_debug("PIRQ1: %d\n", pirq[0]); |
| printk_debug("PIRQ2: %d\n", pirq[1]); |
| printk_debug("PIRQ3: %d\n", pirq[2]); |
| printk_debug("PIRQ4: %d\n", pirq[3]); |
| |
| pirq_assign_irqs(pirq); |
| } |
| #endif |