| chip northbridge/intel/haswell |
| |
| # Enable eDP Hotplug with 6ms pulse |
| register "gpu_dp_d_hotplug" = "0x06" |
| |
| # Disable DisplayPort C Hotplug |
| register "gpu_dp_c_hotplug" = "0x00" |
| |
| # Enable HDMI Hotplug with 6ms pulse |
| register "gpu_dp_b_hotplug" = "0x06" |
| |
| # Set backlight PWM values for eDP |
| register "gpu_cpu_backlight" = "0x00000200" |
| register "gpu_pch_backlight" = "0x04000000" |
| |
| device cpu_cluster 0 on |
| chip cpu/intel/socket_rPGA989 |
| device lapic 0 on end |
| end |
| chip cpu/intel/haswell |
| # Magic APIC ID to locate this chip |
| device lapic 0xACAC off end |
| |
| register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) |
| register "c2_battery" = "9" # ACPI(C2) = MWAIT(C7S) |
| register "c3_battery" = "12" # ACPI(C3) = MWAIT(C10) |
| |
| register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) |
| register "c2_acpower" = "9" # ACPI(C2) = MWAIT(C7S) |
| register "c3_acpower" = "12" # ACPI(C3) = MWAIT(C10) |
| end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on end # host bridge |
| device pci 02.0 on end # vga controller |
| |
| chip southbridge/intel/lynxpoint |
| register "pirqa_routing" = "0x8b" |
| register "pirqb_routing" = "0x8a" |
| register "pirqc_routing" = "0x8b" |
| register "pirqd_routing" = "0x8b" |
| register "pirqe_routing" = "0x80" |
| register "pirqf_routing" = "0x80" |
| register "pirqg_routing" = "0x80" |
| register "pirqh_routing" = "0x80" |
| |
| # EC range is 0x800-0x9ff |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x00fc0901" |
| |
| # EC_SMI is GPIO34 |
| register "alt_gp_smi_en" = "0x0004" |
| register "gpe0_en_1" = "0x00000000" |
| # EC_SCI is GPIO36 |
| register "gpe0_en_2" = "0x00000010" |
| register "gpe0_en_3" = "0x00000000" |
| register "gpe0_en_4" = "0x00000000" |
| |
| register "ide_legacy_combined" = "0x0" |
| register "sata_ahci" = "0x1" |
| register "sata_port_map" = "0x1" |
| |
| register "sio_acpi_mode" = "0" |
| register "sio_i2c0_voltage" = "0" # 3.3V |
| register "sio_i2c1_voltage" = "0" # 3.3V |
| |
| device pci 13.0 off end # Smart Sound Audio DSP |
| device pci 14.0 on end # USB3 XHCI |
| device pci 15.0 on end # Serial I/O DMA |
| device pci 15.1 on end # I2C0 |
| device pci 15.2 on end # I2C1 |
| device pci 15.3 off end # GSPI0 |
| device pci 15.4 off end # GSPI1 |
| device pci 15.5 off end # UART0 |
| device pci 15.6 off end # UART1 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT |
| device pci 17.0 off end # SDIO |
| device pci 19.0 off end # GbE |
| device pci 1b.0 on end # High Definition Audio |
| device pci 1c.0 on end # PCIe Port #1 |
| device pci 1c.1 off end # PCIe Port #2 |
| device pci 1c.2 off end # PCIe Port #3 |
| device pci 1c.3 off end # PCIe Port #4 |
| device pci 1c.4 off end # PCIe Port #5 |
| device pci 1c.5 off end # PCIe Port #6 |
| device pci 1d.0 on end # USB2 EHCI |
| device pci 1e.0 off end # PCI bridge |
| device pci 1f.0 on |
| chip ec/google/chromeec |
| # We only have one init function that |
| # we need to call to initialize the |
| # keyboard part of the EC. |
| device pnp ff.1 on # dummy address |
| end |
| end |
| end # LPC bridge |
| device pci 1f.2 on end # SATA Controller |
| device pci 1f.3 on end # SMBus |
| device pci 1f.6 on end # Thermal |
| end |
| end |
| end |