uImage.FIT is the new format used for uImage payloads developed by U-boot.
The FIT can contain multiple sections, each holding a unique kernel, initrd or config. Out of the sections one kernel and one initrd is chosen, depending on the matching config.
The config is selected depending on the compat string.
The section must be named in order to be found by the FIT parser:
The FIT parser needs architecure support.
The source code can be found in src/arch/arm64/fit_payload.c
.
On aarch64 the kernel (a section named 'kernel') must be in Image format and it needs a devicetree (a section named 'fdt') to boot. The kernel will be placed close to "DRAMSTART".
The source code can be found in src/arch/riscv/fit_payload.c
.
On RISC-V the kernel (a section named 'kernel') must be in Image format and it needs a devicetree (a section named 'fdt') to boot. The kernel will be placed close to "DRAMSTART".
Other architectures aren't supported.
The FIT image has to be included uncompressed into the CBFS. The sections inside the FIT image can use different compression schemes.
Supported compression algorithms:
The config entries contain a compatible string, that is used to find a matching config.
The following mainboard specific functions provide the BOARDID and SKUID:
uint32_t board_id(void);
uint32_t sku_id(void);
By default the following compat strings are added:
Example:
cavium,cn8100_sff_evb
If board_id() or sku_id() return invalid, the single comapt string isn't added.
You can add custom compat strings by calling:
fit_add_compat_string(const char *str);
If no matching compat string is found, the default config is chosen.
The FIT image has to be built by calling mkimage
. You can use the following example configuration:
/* * Simple U-Boot uImage source file containing a single kernel and FDT blob */ /dts-v1/; / { description = "Simple image with single Linux kernel and FDT blob"; #address-cells = <1>; images { kernel { description = "Vanilla Linux kernel"; data = /incbin/("Image.lzma"); type = "kernel"; arch = "arm64"; os = "linux"; compression = "lzma"; load = <0x80000>; entry = <0x80000>; hash-1 { algo = "crc32"; }; }; fdt-1 { description = "Flattened Device Tree blob"; data = /incbin/("target.dtb"); type = "flat_dt"; arch = "arm64"; compression = "none"; hash-1 { algo = "crc32"; }; }; ramdisk-1 { description = "Compressed Initramfs"; data = /incbin/("initramfs.cpio.xz"); type = "ramdisk"; arch = "arm64"; os = "linux"; compression = "none"; load = <00000000>; entry = <00000000>; hash-1 { algo = "sha1"; }; }; }; configurations { default = "conf-1"; conf-1 { description = "Boot Linux kernel with FDT blob"; kernel = "kernel"; fdt = "fdt-1"; ramdisk = "ramdisk-1"; }; }; };
Save it as ITS file config.its
along with the other files defined here:
Generate the uImage
that will be included into the CBFS by calling
mkimage -f config.its uImage
The generated file includes a compressed initrd initramfs.cpio.xz, which will be decompressed by the Linux kernel, a compressed kernel Image.lzma, which will be decompressed by the FIT loader and an uncompressed devicetree blob.