commit e808fb2ac7a8197b7cb9ba1fe3923e5d80602558
author Damien Zammit <damien@zamaudio.com> Fri Nov 25 22:10:19 2016 +1100
committer Martin Roth <martinroth@google.com> Mon Nov 28 01:13:39 2016 +0100
tree 425bfcd25a13ec26781dd48fbe9a0cde44f4d404
parent a6cbbd6a0aaec6f4f3af85e7152d54da7d7ab900

mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO EC

Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17602
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>

src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb

diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
index bd80742..60004d2 100644
--- a/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
+++ b/src/mainboard/gigabyte/ga-g41m-es2l/devicetree.cb
@@ -82,6 +82,31 @@
       device pci 1f.0 on		# ISA bridge
         subsystemid 0x1458 0x5001
         chip superio/ite/it8718f	# Super I/O
+          register "TMPIN1" = "THERMAL_RESISTOR"
+          register "TMPIN2" = "THERMAL_RESISTOR"
+          register "TMPIN3" = "THERMAL_DIODE"
+          register "ec.vin_mask" = "VIN7 | VIN4 | VIN3 | VIN2 | VIN1 | VIN0"
+
+          register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
+          register "FAN1.smart.tmpin" = "3"
+          register "FAN1.smart.tmp_off" = "25"
+          register "FAN1.smart.tmp_start" = "30"
+          register "FAN1.smart.tmp_full" = "65"
+          register "FAN1.smart.tmp_delta" = "3"
+          register "FAN1.smart.smoothing" = "1"
+          register "FAN1.smart.pwm_start" = "0"
+          register "FAN1.smart.slope" = "10"
+
+          register "FAN2.mode" = "FAN_SMART_AUTOMATIC"
+          register "FAN2.smart.tmpin" = "3"
+          register "FAN2.smart.tmp_off" = "25"
+          register "FAN2.smart.tmp_start" = "30"
+          register "FAN2.smart.tmp_full" = "65"
+          register "FAN2.smart.tmp_delta" = "3"
+          register "FAN2.smart.smoothing" = "1"
+          register "FAN2.smart.pwm_start" = "0"
+          register "FAN2.smart.slope" = "10"
+
           device pnp 2e.0 on		# Floppy
             io 0x60 = 0x3f0
             irq 0x70 = 6