tree d8f904833376abe8f987746f8b5ee388a7d9fb7f
parent 2de0e8762225265fcf5b72b9d2b9b291f57af50c
author Patrick Rudolph <patrick.rudolph@9elements.com> 1714295923 +0200
committer Felix Held <felix-coreboot@felixheld.de> 1714991111 +0000

mb/lenovo/*: Set VR12 PSI to fix crash

When in Package C3 or deeper the PSI settings are used to switch the
CPU VR into a low power state. It was found that the voltage regulator
on the Sandy-Bridge series has non-default PSI settings, compared to
Lenovo's Ivy-Bridge series. Apply the same PSI value for PSI2 and PSI3
as the vendor BIOS does to fix a hang when the package is idle.

Since neither the vendor BIOS is open-source, nor datasheet exists for
the used VR it's unclear why those PSI values must be used and how
they influence the regulator.

The X220 already has the correct PSI values configured and is now stable
for more than 24h in Package C7 state.

TEST: Not tested on the affected boards, only checked vendor firmware.

Change-Id: Idf8c3719f19f7bcdab30c543215c8abd2669cfd2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>