mb/intel/dg43gt: Configure clockgen
This makes the VGA output on the DVI-I connector usable.
This reuses vendor settings.
Change-Id: Ib8b6bf33816f7e468a09ff5e2008c2cb9f7c0a8b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
diff --git a/src/mainboard/intel/dg43gt/devicetree.cb b/src/mainboard/intel/dg43gt/devicetree.cb
index 6421673..79a8eb7 100644
--- a/src/mainboard/intel/dg43gt/devicetree.cb
+++ b/src/mainboard/intel/dg43gt/devicetree.cb
@@ -101,7 +101,19 @@
end
device pci 1f.1 on end # PATA/IDE
device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMbus
+ device pci 1f.3 on # SMbus
+ chip drivers/i2c/ck505 # SLG8XP549T
+ register "mask" = "{ 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff }"
+ register "regs" = "{ 0x11, 0xd9, 0xff,
+ 0xfd, 0xff, 0x00, 0x00,
+ 0x06, 0x10, 0x05, 0x01,
+ 0x80, 0x0d }"
+ device i2c 69 on end
+ end
+ end
device pci 1f.4 off end
device pci 1f.5 on end # IDE
device pci 1f.6 off end