mb/siemens/mc_ehl4: Add new board variant based on mc_ehl1
This mainboard is based on mc_ehl1. In a first step, it contains a copy
of mc_ehl1 directory with minimum changes. Special adaptations for
mc_ehl4 mainboard will follow in separate commits.
Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/siemens/mc_ehl/Kconfig b/src/mainboard/siemens/mc_ehl/Kconfig
index 7e1d78f..74b8929 100644
--- a/src/mainboard/siemens/mc_ehl/Kconfig
+++ b/src/mainboard/siemens/mc_ehl/Kconfig
@@ -24,11 +24,13 @@
default "mc_ehl1" if BOARD_SIEMENS_MC_EHL1
default "mc_ehl2" if BOARD_SIEMENS_MC_EHL2
default "mc_ehl3" if BOARD_SIEMENS_MC_EHL3
+ default "mc_ehl4" if BOARD_SIEMENS_MC_EHL4
config MAINBOARD_PART_NUMBER
default "MC EHL1" if BOARD_SIEMENS_MC_EHL1
default "MC EHL2" if BOARD_SIEMENS_MC_EHL2
default "MC EHL3" if BOARD_SIEMENS_MC_EHL3
+ default "MC EHL4" if BOARD_SIEMENS_MC_EHL4
config DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb"
diff --git a/src/mainboard/siemens/mc_ehl/Kconfig.name b/src/mainboard/siemens/mc_ehl/Kconfig.name
index 3d657cf..2eead51 100644
--- a/src/mainboard/siemens/mc_ehl/Kconfig.name
+++ b/src/mainboard/siemens/mc_ehl/Kconfig.name
@@ -11,3 +11,7 @@
config BOARD_SIEMENS_MC_EHL3
bool "-> MC_EHL3"
select BOARD_SIEMENS_BASEBOARD_MC_EHL
+
+config BOARD_SIEMENS_MC_EHL4
+ bool "-> MC_EHL4"
+ select BOARD_SIEMENS_BASEBOARD_MC_EHL
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Kconfig b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Kconfig
new file mode 100644
index 0000000..ee725cc
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Kconfig
@@ -0,0 +1,32 @@
+if BOARD_SIEMENS_MC_EHL4
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select DRIVERS_I2C_RX6110SA
+ select DRIVER_INTEL_I210
+ select INTEL_LPSS_UART_FOR_CONSOLE
+ select NC_FPGA_POST_CODE
+
+config FMDFILE
+ default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/mc_ehl.fmd"
+
+config UART_FOR_CONSOLE
+ int
+ default 2
+
+config EARLY_PCI_BRIDGE_DEVICE
+ hex
+ depends on NC_FPGA_POST_CODE
+ default 0x1c
+
+config EARLY_PCI_BRIDGE_FUNCTION
+ hex
+ depends on NC_FPGA_POST_CODE
+ default 0x2
+
+config EARLY_PCI_MMIO_BASE
+ hex
+ depends on NC_FPGA_POST_CODE
+ default 0xfe800000
+
+endif # BOARD_SIEMENS_MC_EHL4
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Makefile.inc b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Makefile.inc
new file mode 100644
index 0000000..2b78a7a
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/Makefile.inc
@@ -0,0 +1,7 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+bootblock-y += gpio.c
+romstage-y += memory.c
+ramstage-y += gpio.c
+
+all-$(CONFIG_NC_FPGA_POST_CODE) += post.c
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
new file mode 100644
index 0000000..4e2fffc
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/devicetree.cb
@@ -0,0 +1,192 @@
+chip soc/intel/elkhartlake
+
+ device cpu_cluster 0 on end
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "pmc_gpe0_dw0" = "GPP_B"
+ register "pmc_gpe0_dw1" = "GPP_F"
+ register "pmc_gpe0_dw2" = "GPP_E"
+
+ # FSP configuration
+ register "SaGv" = "SaGv_Disabled"
+
+ # Enable IBECC for the complete memory
+ register "ibecc" = "{
+ .enable = 1,
+ .mode = IBECC_ALL
+ }"
+
+ # USB related UPDs
+ register "usb2_ports[0]" = "USB2_PORT_SHORT(OC_SKIP)" # USB3/2 Type A port 1
+ register "usb2_ports[1]" = "USB2_PORT_SHORT(OC_SKIP)" # USB3/2 Type A Port 2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Onboard USB
+ register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Port is unused
+ register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Port is unused
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port2
+ register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Port is not used
+ register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Port is not used
+
+ # Skip the CPU replacement check
+ register "SkipCpuReplacementCheck" = "1"
+
+ # PCIe root ports related UPDs
+ register "PcieRpEnable[0]" = "1"
+ register "PcieRpEnable[1]" = "1"
+ register "PcieRpEnable[2]" = "1"
+ register "PcieRpEnable[3]" = "1"
+ register "PcieRpEnable[6]" = "1"
+
+ register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE"
+ register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE"
+ register "PcieClkSrcUsage[2]" = "PCIE_CLK_FREE"
+ register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcUsage[4]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcUsage[5]" = "PCIE_CLK_NOTUSED"
+
+ register "PcieClkSrcClkReq[0]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcClkReq[1]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcClkReq[2]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcClkReq[3]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcClkReq[4]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcClkReq[5]" = "PCIE_CLK_NOTUSED"
+
+ # Disable all L1 substates for PCIe root ports
+ register "PcieRpL1Substates[0]" = "L1_SS_DISABLED"
+ register "PcieRpL1Substates[1]" = "L1_SS_DISABLED"
+ register "PcieRpL1Substates[2]" = "L1_SS_DISABLED"
+ register "PcieRpL1Substates[3]" = "L1_SS_DISABLED"
+ register "PcieRpL1Substates[6]" = "L1_SS_DISABLED"
+
+ # Disable LTR for all PCIe root ports
+ register "PcieRpLtrDisable[0]" = "true"
+ register "PcieRpLtrDisable[1]" = "true"
+ register "PcieRpLtrDisable[2]" = "true"
+ register "PcieRpLtrDisable[3]" = "true"
+ register "PcieRpLtrDisable[6]" = "true"
+
+ # Storage (SATA/SDCARD/EMMC) related UPDs
+ register "SataSalpSupport" = "0"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsDevSlp[0]" = "0"
+ register "SataPortsDevSlp[1]" = "0"
+ register "SataSpeed" = "SATA_GEN2"
+
+ register "ScsEmmcHs400Enabled" = "0"
+ register "ScsEmmcDdr50Enabled" = "1"
+ register "SdCardPowerEnableActiveHigh" = "1"
+
+ # LPSS Serial IO (I2C/UART/GSPI) related UPDs
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoPci,
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C6] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C7] = PchSerialIoDisabled,
+ }"
+
+ register "SerialIoI2cPadsTermination" = "{
+ [PchSerialIoIndexI2C0] = 1,
+ [PchSerialIoIndexI2C1] = 1,
+ [PchSerialIoIndexI2C2] = 1,
+ [PchSerialIoIndexI2C3] = 1,
+ [PchSerialIoIndexI2C4] = 1,
+ [PchSerialIoIndexI2C5] = 1,
+ [PchSerialIoIndexI2C6] = 1,
+ [PchSerialIoIndexI2C7] = 1,
+ }"
+
+ register "SerialIoUartMode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoPci,
+ [PchSerialIoIndexUART1] = PchSerialIoPci,
+ [PchSerialIoIndexUART2] = PchSerialIoSkipInit,
+ }"
+
+ register "SerialIoUartDmaEnable" = "{
+ [PchSerialIoIndexUART0] = 1,
+ [PchSerialIoIndexUART1] = 1,
+ [PchSerialIoIndexUART2] = 1,
+ }"
+
+ # TSN GBE related UPDs
+ register "PchTsnGbeLinkSpeed" = "Tsn_2_5_Gbps"
+ register "PchTsnGbeSgmiiEnable" = "1"
+
+ # FIVR related settings
+ register "fivr" = "{
+ .fivr_config_en = true,
+ .vcc_low_high_us = 50,
+ }"
+
+ # Disable L1 prefetcher
+ register "L1_prefetcher_disable" = "true"
+
+ # Enable real-time tuning
+ register "realtime_tuning_enable" = "true"
+
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Integrated Graphics Device
+
+ device pci 14.0 on end # USB3.1 xHCI
+
+ device pci 15.0 off end # I2C0
+ device pci 15.1 on end # I2C1
+
+ device pci 16.0 hidden end # Management Engine Interface 1
+
+ device pci 17.0 on end # SATA
+
+ device pci 19.0 on end # I2C4
+ device pci 19.2 on end # UART2
+
+ device pci 1a.0 on end # eMMC
+
+ device pci 1c.0 on end # RP1 (pcie0 single VC)
+ device pci 1c.1 on end # RP2 (pcie0 single VC)
+ device pci 1c.2 on end # RP3 (pcie0 single VC)
+ device pci 1c.3 on end # RP4 (pcie0 single VC)
+ device pci 1c.6 on end # RP7 (pcie3 multi VC)
+
+ device pci 1e.0 on end # UART0
+ device pci 1e.1 on end # UART1
+
+
+ device pci 1f.0 on # eSPI Interface
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+ end
+ device pci 1f.2 hidden end # Power Management Controller
+ device pci 1f.4 on # SMBus
+ # Enable external RTC chip
+ chip drivers/i2c/rx6110sa
+ register "bus_speed" = "I2C_SPEED_STANDARD"
+ register "pmon_sampling" = "PMON_SAMPL_256_MS"
+ register "bks_on" = "0"
+ register "bks_off" = "1"
+ register "iocut_en" = "1"
+ register "set_user_date" = "1"
+ register "user_year" = "04"
+ register "user_month" = "07"
+ register "user_day" = "01"
+ register "user_weekday" = "4"
+ device i2c 0x32 on end # RTC RX6110 SA
+ end
+ end
+ device pci 1f.5 on end # PCH SPI (flash & TPM)
+ end
+end
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/gpio.c b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/gpio.c
new file mode 100644
index 0000000..b6c755a
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/gpio.c
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config gpio_table[] = {
+ /* Community 0 - GpioGroup GPP_B */
+ PAD_CFG_NF(GPP_B2, NONE, PLTRST, NF1), /* PMC_VRALERT_N */
+ PAD_CFG_NF(GPP_B3, NONE, PLTRST, NF4), /* ESPI_ALERT0_N */
+ PAD_CFG_NF(GPP_B4, NONE, PLTRST, NF4), /* ESPI_ALERT1_N */
+ PAD_NC(GPP_B9, NONE), /* Not connected */
+ PAD_NC(GPP_B10, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_B11, NONE, PLTRST, NF1), /* PMC_ALERT_N */
+ PAD_NC(GPP_B14, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_B15, NONE, PLTRST, NF5), /* ESPI_CS1_N */
+ PAD_NC(GPP_B18, NONE), /* Not connected */
+ PAD_NC(GPP_B19, NONE), /* Not connected */
+ PAD_NC(GPP_B20, NONE), /* Not connected */
+ PAD_NC(GPP_B21, NONE), /* Not connected */
+ PAD_NC(GPP_B22, NONE), /* Not connected */
+ PAD_NC(GPP_B23, NONE), /* Not connected */
+
+ /* Community 0 - GpioGroup GPP_T */
+ PAD_CFG_NF(GPP_T4, UP_20K, DEEP, NF1), /* PSE_GBE0_INT */
+ PAD_CFG_NF(GPP_T5, DN_20K, DEEP, NF1), /* PSE_GBE0_RST_N */
+ PAD_CFG_NF(GPP_T6, NONE, DEEP, NF1), /* PSE_GBE0_AUXTS */
+ PAD_CFG_NF(GPP_T7, NONE, DEEP, NF1), /* PSE_GBE0_PPS */
+ PAD_CFG_NF(GPP_T12, NONE, DEEP, NF2), /* SIO_UART0_RXD */
+ PAD_CFG_NF(GPP_T13, NONE, DEEP, NF2), /* SIO_UART0_TXD */
+
+ /* Community 0 - GpioGroup GPP_G */
+ PAD_NC(GPP_G8, NONE), /* Not connected */
+ PAD_NC(GPP_G9, NONE), /* Not connected */
+ PAD_NC(GPP_G12, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_G15, NONE, DEEP, NF1), /* ESPI_IO_0 */
+ PAD_CFG_NF(GPP_G16, NONE, DEEP, NF1), /* ESPI_IO_1 */
+ PAD_CFG_NF(GPP_G17, NONE, DEEP, NF1), /* ESPI_IO_2 */
+ PAD_CFG_NF(GPP_G18, NONE, DEEP, NF1), /* ESPI_IO_3 */
+ PAD_CFG_GPI(GPP_G19, UP_20K, PLTRST), /* TPM_IRQ_N */
+ PAD_CFG_NF(GPP_G20, NONE, DEEP, NF1), /* ESPI_CSO_N */
+ PAD_CFG_NF(GPP_G21, NONE, DEEP, NF1), /* ESPI_CLK */
+ PAD_CFG_NF(GPP_G22, NONE, DEEP, NF1), /* ESPI_RST0_N */
+
+ /* Community 1 - GpioGroup GPP_V */
+ PAD_CFG_NF(GPP_V0, UP_20K, DEEP, NF1), /* EMMC_CMD */
+ PAD_CFG_NF(GPP_V1, UP_20K, DEEP, NF1), /* EMMC_DATA0 */
+ PAD_CFG_NF(GPP_V2, UP_20K, DEEP, NF1), /* EMMC_DATA1 */
+ PAD_CFG_NF(GPP_V3, UP_20K, DEEP, NF1), /* EMMC_DATA2 */
+ PAD_CFG_NF(GPP_V4, UP_20K, DEEP, NF1), /* EMMC_DATA3 */
+ PAD_CFG_NF(GPP_V5, UP_20K, DEEP, NF1), /* EMMC_DATA4 */
+ PAD_CFG_NF(GPP_V6, UP_20K, DEEP, NF1), /* EMMC_DATA5 */
+ PAD_CFG_NF(GPP_V7, UP_20K, DEEP, NF1), /* EMMC_DATA6 */
+ PAD_CFG_NF(GPP_V8, UP_20K, DEEP, NF1), /* EMMC_DATA7 */
+ PAD_CFG_NF(GPP_V9, DN_20K, DEEP, NF1), /* EMMC_RCLK */
+ PAD_CFG_NF(GPP_V10, DN_20K, DEEP, NF1), /* EMMC_CLK */
+ PAD_CFG_NF(GPP_V11, NONE, DEEP, NF1), /* EMMC_RESET_N */
+
+ /* Community 1 - GpioGroup GPP_H */
+ PAD_CFG_NF(GPP_H0, DN_20K, DEEP, NF1), /* PSE_GBE1_INT */
+ PAD_CFG_NF(GPP_H1, DN_20K, DEEP, NF1), /* PSE_GBE1_RST_N */
+ PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1), /* PSE_GBE1_AUXTS */
+ PAD_CFG_NF(GPP_H3, NONE, DEEP, NF1), /* PSE_GBE1_PPS */
+ PAD_CFG_NF(GPP_H8, UP_20K, DEEP, NF1), /* SIO_I2C4_SDA */
+ PAD_CFG_NF(GPP_H9, UP_20K, DEEP, NF1), /* SIO_I2C4_SCL */
+
+ /* Community 1 - GpioGroup GPP_D */
+ PAD_CFG_GPO(GPP_D16, 0, DEEP), /* EMMC_PWR_EN_N */
+
+ /* Community 1 - GpioGroup GPP_U */
+ PAD_CFG_NF(GPP_U0, DN_20K, DEEP, NF1), /* GBE_INT */
+ PAD_CFG_NF(GPP_U1, DN_20K, DEEP, NF1), /* GBE_RST_N */
+ PAD_CFG_NF(GPP_U2, NONE, DEEP, NF1), /* GBE_PPS */
+ PAD_CFG_NF(GPP_U3, NONE, DEEP, NF1), /* GBE_AUXTS */
+ PAD_NC(GPP_U12, NONE), /* Not connected */
+ PAD_NC(GPP_U13, NONE), /* Not connected */
+ PAD_NC(GPP_U16, NONE), /* Not connected */
+ PAD_NC(GPP_U17, NONE), /* Not connected */
+ PAD_NC(GPP_U18, NONE), /* Not connected */
+ PAD_CFG_GPO(GPP_U19, 1, DEEP), /* UPD_REQ_N */
+
+ /* Community 2 - GpioGroup DSW */
+ PAD_CFG_NF(GPD4, NONE, PLTRST, NF1), /* SLP_S3 */
+ PAD_CFG_NF(GPD5, NONE, PLTRST, NF1), /* SLP_S4 */
+ PAD_NC(GPD7, NONE), /* Not connected */
+ PAD_CFG_NF(GPD10, NONE, PLTRST, NF1), /* SLP_S5 */
+
+ /* Community 3 - GpioGroup GPP_S */
+ PAD_NC(GPP_S0, NONE), /* Not connected */
+ PAD_NC(GPP_S1, NONE), /* Not connected */
+
+ /* Community 3 - GpioGroup GPP_A */
+ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXD3 */
+ PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXD2 */
+ PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXD1 */
+ PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXD0 */
+ PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXCLK */
+ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_TXCTL */
+ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXCLK */
+ PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXD3 */
+ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXD2 */
+ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXD1 */
+ PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXD0 */
+ PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1), /* PSE_GBE0_RGMII_RXCTL */
+
+ /* Community 4 - GpioGroup GPP_C */
+ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), /* PSE_GBE0_MDC */
+ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), /* PSE_GBE0_MDIO */
+ PAD_NC(GPP_C5, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), /* PSE_GBE0_AUXTS */
+ PAD_CFG_NF(GPP_C7, NONE, DEEP, NF1), /* PSE_GBE0_PPS */
+ PAD_NC(GPP_C8, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF4), /* SIO_UART1_RXD */
+ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF4), /* SIO_UART1_TXD */
+ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), /* GBE_MDIO */
+ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), /* GBE_MDC */
+ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF4), /* SIO_I2C1_SDA */
+ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF4), /* SIO_I2C1_SCL */
+
+ /* Community 4 - GpioGroup GPP_F */
+ PAD_NC(GPP_F0, NONE), /* Not connected */
+ PAD_NC(GPP_F1, NONE), /* Not connected */
+ PAD_NC(GPP_F2, NONE), /* Not connected */
+ PAD_NC(GPP_F3, NONE), /* Not connected */
+ PAD_NC(GPP_F4, NONE), /* Not connected */
+ PAD_NC(GPP_F5, NONE), /* Not connected */
+ PAD_NC(GPP_F7, NONE), /* Not connected */
+ PAD_NC(GPP_F8, NONE), /* Not connected */
+ PAD_NC(GPP_F10, NONE), /* Not connected */
+ PAD_NC(GPP_F11, NONE), /* Not connected */
+ PAD_NC(GPP_F12, NONE), /* Not connected */
+ PAD_NC(GPP_F13, NONE), /* Not connected */
+ PAD_NC(GPP_F14, NONE), /* Not connected */
+ PAD_NC(GPP_F15, NONE), /* Not connected */
+ PAD_NC(GPP_F16, NONE), /* Not connected */
+ PAD_NC(GPP_F17, NONE), /* Not connected */
+ PAD_NC(GPP_F20, NONE), /* Not connected */
+ PAD_NC(GPP_F21, NONE), /* Not connected */
+
+ /* Community 4 - GpioGroup GPP_E */
+ PAD_CFG_NF(GPP_E0, NONE, DEEP, NF1), /* SATA_LED_N */
+ PAD_CFG_NF(GPP_E3, NONE, DEEP, NF1), /* DDI1_HPD */
+ PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), /* DDI1_DDC_SDA */
+ PAD_NC(GPP_E6, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_E7, NONE, DEEP, NF1), /* DDI1_DDC_SCL */
+ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* DDI0_HPD */
+ PAD_NC(GPP_E15, NONE), /* Not connected */
+ PAD_NC(GPP_E16, NONE), /* Not connected */
+ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), /* DDI0_DDC_SDA */
+ PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1), /* DDI0_DDC_SCL */
+ PAD_NC(GPP_E23, NONE), /* Not connected */
+
+ /* Community 5 - GpioGroup GPP_R */
+ PAD_NC(GPP_R1, NONE), /* Not connected */
+ PAD_NC(GPP_R2, NONE), /* Not connected */
+ PAD_NC(GPP_R3, NONE), /* Not connected */
+};
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), /* SMB_CLK */
+ PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), /* SMB_DATA */
+ PAD_CFG_NF(GPP_C2, NONE, DEEP, NF2), /* SMB_ALERT_N */
+ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF4), /* SIO_UART2_RXD */
+ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF4), /* SIO_UART2_TXD */
+};
+
+const struct pad_config *variant_gpio_table(size_t *num)
+{
+ *num = ARRAY_SIZE(gpio_table);
+ return gpio_table;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+ *num = ARRAY_SIZE(early_gpio_table);
+ return early_gpio_table;
+}
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/memory.c b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/memory.c
new file mode 100644
index 0000000..7b7dad1
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/memory.c
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/meminit.h>
+#include <soc/romstage.h>
+
+static const struct mb_cfg mc_ehl_lpddr4x_memcfg_cfg = {
+
+ .dq_map[DDR_CH0] = {
+ {0xf, 0xf0},
+ {0xf, 0xf0},
+ {0xff, 0x0},
+ {0x0, 0x0},
+ {0x0, 0x0},
+ {0x0, 0x0}
+ },
+
+ .dq_map[DDR_CH1] = {
+ {0xf, 0xf0},
+ {0xf, 0xf0},
+ {0xff, 0x0},
+ {0x0, 0x0},
+ {0x0, 0x0},
+ {0x0, 0x0}
+ },
+
+ /*
+ * The dqs_map arrays map the ddr4 pins to the SoC pins
+ * for both channels.
+ *
+ * the index = pin number on ddr4 part
+ * the value = pin number on SoC
+ */
+ .dqs_map[DDR_CH0] = {3, 0, 1, 2, 7, 4, 5, 6},
+ .dqs_map[DDR_CH1] = {3, 0, 1, 2, 7, 4, 5, 6},
+
+ /* Baseboard uses 100, 100 and 100 rcomp resistors */
+ .rcomp_resistor = {100, 100, 100},
+
+ .rcomp_targets = {60, 40, 30, 20, 30},
+
+ /* LPDDR4x does not allow interleaved memory */
+ .dq_pins_interleaved = 0,
+
+ /* Baseboard is using config 2 for vref_ca */
+ .vref_ca_config = 2,
+
+ /* Enable Early Command Training */
+ .ect = 1,
+
+ /* Set Board Type */
+ .UserBd = BOARD_TYPE_MOBILE,
+};
+
+const struct mb_cfg *variant_memcfg_config(void)
+{
+ return &mc_ehl_lpddr4x_memcfg_cfg;
+}
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/post.c b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/post.c
new file mode 100644
index 0000000..c34e253
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl4/post.c
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <nc_fpga.h>
+#include <types.h>
+
+void mainboard_post(uint8_t value)
+{
+ nc_fpga_post(value);
+}