blob: 8309d1969aac605f385c5cfc6073a5539415086d [file] [log] [blame]
## This file is part of the coreboot project.
##
## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc.
##
config MAINBOARD_HAS_CHROMEOS
def_bool n
menu "ChromeOS"
depends on MAINBOARD_HAS_CHROMEOS
config CHROMEOS
bool "Build for ChromeOS"
default n
select TPM
select TPM_INIT_FAILURE_IS_FATAL
select SKIP_TPM_STARTUP_ON_NORMAL_BOOT
select BOOTMODE_STRAPS
select ELOG
select COLLECT_TIMESTAMPS
select VBOOT_VERIFY_FIRMWARE
help
Enable ChromeOS specific features like the GPIO sub table in
the coreboot table. NOTE: Enabling this option on an unsupported
board will most likely break your build.
if CHROMEOS
config VBNV_OFFSET
hex
default 0x26
depends on PC80_SYSTEM
help
CMOS offset for VbNv data. This value must match cmos.layout
in the mainboard directory, minus 14 bytes for the RTC.
config VBNV_SIZE
hex
default 0x10
depends on PC80_SYSTEM
help
CMOS storage size for VbNv data. This value must match cmos.layout
in the mainboard directory.
config CHROMEOS_VBNV_CMOS
bool "Vboot non-volatile storage in CMOS."
default n
help
VBNV is stored in CMOS
config CHROMEOS_VBNV_EC
bool "Vboot non-volatile storage in EC."
default n
help
VBNV is stored in EC
config CHROMEOS_VBNV_FLASH
def_bool n
help
VBNV is stored in flash storage
config CHROMEOS_RAMOOPS
bool "Reserve space for Chrome OS ramoops"
default y
config CHROMEOS_RAMOOPS_DYNAMIC
bool "Allocate RAM oops buffer in cbmem"
default n
depends on CHROMEOS_RAMOOPS && HAVE_ACPI_TABLES
config CHROMEOS_RAMOOPS_NON_ACPI
bool "Allocate RAM oops buffer in cbmem passed through cb tables to payload"
default n
depends on CHROMEOS_RAMOOPS && !HAVE_ACPI_TABLES
config CHROMEOS_RAMOOPS_RAM_START
hex "Physical address of preserved RAM"
default 0x00f00000
depends on CHROMEOS_RAMOOPS && !CHROMEOS_RAMOOPS_DYNAMIC
config CHROMEOS_RAMOOPS_RAM_SIZE
hex "Size of preserved RAM"
default 0x00100000
depends on CHROMEOS_RAMOOPS
config EC_SOFTWARE_SYNC
bool "Enable EC software sync"
default n
depends on VBOOT_VERIFY_FIRMWARE
help
EC software sync is a mechanism where the AP helps the EC verify its
firmware similar to how vboot verifies the main system firmware. This
option selects whether depthcharge should support EC software sync.
config VBOOT_EC_SLOW_UPDATE
bool "EC is slow to update"
default n
depends on EC_SOFTWARE_SYNC
help
Whether the EC (or PD) is slow to update and needs to display a
screen that informs the user the update is happening.
config VBOOT_OPROM_MATTERS
bool "Video option ROM matters"
default n
depends on VBOOT_VERIFY_FIRMWARE
help
Whether the video option ROM has run matters on this platform.
config VIRTUAL_DEV_SWITCH
bool "Virtual developer switch support"
default n
depends on VBOOT_VERIFY_FIRMWARE
help
Whether this platform has a virtual developer switch.
config VBOOT_VERIFY_FIRMWARE
bool "Verify firmware with vboot."
default n
depends on HAVE_HARD_RESET
help
Enabling VBOOT_VERIFY_FIRMWARE will use vboot to verify the components
of the firmware (stages, payload, etc).
config NO_TPM_RESUME
bool
default n
help
On some boards the TPM stays powered up in S3. On those
boards, booting Windows will break if the TPM resume command
is sent during an S3 resume.
config PHYSICAL_REC_SWITCH
bool "Physical recovery switch is present"
default n
help
Whether this platform has a physical recovery switch
config LID_SWITCH
bool "Lid switch is present"
default n
help
Whether this platform has a lid switch
config WIPEOUT_SUPPORTED
bool "User is able to request factory reset"
default n
help
When this option is enabled, the firmware provides the ability to
signal the application the need for factory reset (a.k.a. wipe
out) of the device
source src/vendorcode/google/chromeos/vboot2/Kconfig
endif # CHROMEOS
endmenu