Add support for Sandybridge base Samsung ChromeBox
Change-Id: Ic93ad2749834c8f7a2ca1651d343561f2a496312
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/953
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/mainboard/samsung/stumpy/devicetree.cb b/src/mainboard/samsung/stumpy/devicetree.cb
new file mode 100644
index 0000000..f10b283
--- /dev/null
+++ b/src/mainboard/samsung/stumpy/devicetree.cb
@@ -0,0 +1,126 @@
+chip northbridge/intel/sandybridge
+
+ # Enable DisplayPort 1 Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Enable DisplayPort 0 Hotplug with 6ms pulse
+ register "gpu_dp_c_hotplug" = "0x06"
+
+ # Enable DVI Hotplug with 6ms pulse
+ register "gpu_dp_b_hotplug" = "0x06"
+
+ device lapic_cluster 0 on
+ chip cpu/intel/socket_rPGA989
+ device lapic 0 on end
+ end
+ chip cpu/intel/model_206ax
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3)
+ register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6)
+ register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
+
+ register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3)
+ register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6)
+ register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+
+ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "gpi1_routing" = "0"
+ register "gpi14_routing" = "2"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x3"
+
+ # SuperIO range is 0x700-0x73f
+ register "gen2_dec" = "0x003c0701"
+
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 19.0 off end # Intel Gigabit Ethernet
+ device pci 1a.0 on end # USB2 EHCI #2
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1 (WLAN)
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 on end # PCIe Port #3 (Debug)
+ device pci 1c.3 on end # PCIe Port #4 (LAN)
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1c.6 off end # PCIe Port #7
+ device pci 1c.7 off end # PCIe Port #8
+ device pci 1d.0 on end # USB2 EHCI #1
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on # LPC bridge
+ chip superio/ite/it8772f
+ # Enable GPIO10 as USBPWRON12#
+ # Enable GPIO12 as USBPWRON13#
+ register "gpio_set1" = "0x05"
+ # Enable GPIO22 as SIO_WAEKSCI#
+ register "gpio_set2" = "0x04"
+ # Enable GPIO32 as SIO_EXTSMI#
+ register "gpio_set3" = "0x04"
+ # Enable GPIO45 as LED_POWER#
+ register "gpio_set4" = "0x20"
+ # Enable GPIO51 as USBPWRON8#
+ # Enable GPIO52 as USBPWRON1#
+ register "gpio_set5" = "0x06"
+ # Skip keyboard init
+ register "skip_keyboard" = "1"
+ # Enable PECI on TMPIN3
+ register "peci_tmpin" = "3"
+ # Enable FAN3
+ register "fan3_enable" = "1"
+
+ device pnp 2e.0 off end # FDC
+ device pnp 2e.1 on # Serial Port 1
+ io 0x60 = 0x2f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.4 on # Environment Controller
+ io 0x60 = 0x700
+ io 0x62 = 0x710
+ end
+ device pnp 2e.7 on # GPIO
+ io 0x60 = 0x720
+ io 0x62 = 0x730
+ end
+ device pnp 2e.5 on
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end # Keyboard
+ device pnp 2e.6 on
+ irq 0x70 = 12
+ end # Mouse
+ device pnp 2e.a off end # IR
+ end
+ end
+ device pci 1f.2 on end # SATA Controller 1
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 off end # SATA Controller 2
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end