| commit | e0dbeee40f9cfa0e43465db1a3f1c6c510b212ab | [log] [tgz] |
|---|---|---|
| author | Julius Werner <jwerner@chromium.org> | Wed May 05 17:41:10 2021 -0700 |
| committer | Julius Werner <jwerner@chromium.org> | Sat May 08 00:12:58 2021 +0000 |
| tree | 65385523acd52802575bfb8193b36fcf7b2e6d4e | |
| parent | 2f195fe167ba3083218d599a66e44d9bbc11c1ba [diff] |
drivers/sn65dsi86: Switch EDID reading to use "indirect mode" The SN65DSI86 eDP bridge supports two ways to read the EDID: for now we've been using "direct mode", which works by basically making the bridge I2C device listen to another chip address besides its own and proxy all requests received there directly to the eDP AUX channel. The great part about that mode is that it is super easy and hassle-free to use. The not so great part about it is that it doesn't work: for EDID extensions, the last byte (which happens to contain the checksum) is somehow always read as zero. We presume this is a hardware bug in the bridge part. The other, much more annoying way is "indirect mode", where each byte transmitted over the AUX channel has to be manually set up in the I2C registers of the bridge, just like we're already doing with DPCD transactions. Thankfully, we can reuse most of the DPCD code for this so it's not a lot of extra code. It's a bit slower but not as much as you'd expect (26ms instead of 18ms on my board), and the difference is not very relevant compared to common total times for display init. Also, some of the (previously unused) enum definitions for the AUX_CMD mode field of the bridge had just been plain wrong for some reason, and needed to be fixed to make this work. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I65f80193380d3c3841f9f5c26897ed672f45e15a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52959 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAIN Kconfig option if you're feeling lucky (no support in this case).Optional:
make menuconfig and make nconfig)Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.