blob: 5a4999e4b0355efb5e89a152bb2420e828e4aa53 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
#include <stdint.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <console/console.h>
#include "gm45.h"
static void init_egress(void)
{
/* VC0: TC0 only */
EPBAR8(0x14) &= 1;
EPBAR8(0x4) = (EPBAR8(0x4) & ~7) | 1;
/* VC1: isoch */
EPBAR32(0x28) = 0x0a0a0a0a;
EPBAR32(0x1c) = (EPBAR32(0x1c) & ~(127 << 16)) | (0x0a << 16);
/* VC1: ID1, TC7 */
EPBAR32(0x20) = (EPBAR32(0x20) & ~(7 << 24)) | (1 << 24);
EPBAR8(0x20) = (EPBAR8(0x20) & 1) | (1 << 7);
/* VC1 ARB table: setup and enable */
EPBAR32(0x100) = 0x55555555;
EPBAR32(0x104) = 0x55555555;
EPBAR32(0x108) = 0x55555555;
EPBAR32(0x10c) = 0x55555555;
EPBAR32(0x110) = 0x55555555;
EPBAR32(0x114) = 0x55555555;
EPBAR32(0x118) = 0x55555555;
EPBAR32(0x11c) = 0x00005555;
EPBAR32(0x20) |= 1 << 16;
while ((EPBAR8(0x26) & 1) != 0);
/* VC1: enable */
EPBAR32(0x20) |= 1 << 31;
while ((EPBAR8(0x26) & 2) != 0);
}
/* MCH side */
/* b2step: b2 stepping or higher */
static void init_dmi(int b2step)
{
/* VC0: TC0 only */
DMIBAR8(DMIVC0RCTL) &= 1;
DMIBAR8(0x4) = (DMIBAR8(0x4) & ~7) | 1;
/* VC1: ID1, TC7 */
DMIBAR32(0x20) = (DMIBAR32(0x20) & ~(7 << 24)) | (1 << 24);
DMIBAR8(0x20) = (DMIBAR8(0x20) & 1) | (1 << 7);
/* VC1: enable */
DMIBAR32(0x20) |= 1 << 31;
while ((DMIBAR8(0x26) & 2) != 0);
/* additional configuration. */
DMIBAR32(0x200) |= 3 << 13;
DMIBAR32(0x200) &= ~(1 << 21);
DMIBAR32(0x200) = (DMIBAR32(0x200) & ~(3 << 26)) | (2 << 26);
DMIBAR32(0x2c) = 0x86000040;
DMIBAR32(0xfc) |= 1 << 0;
DMIBAR32(0xfc) |= 1 << 1;
DMIBAR32(0xfc) |= 1 << 4;
if (!b2step) {
DMIBAR32(0xfc) |= 1 << 11;
} else {
DMIBAR32(0xfc) &= ~(1 << 11);
}
DMIBAR32(0x204) &= ~(3 << 10);
DMIBAR32(0xf4) &= ~(1 << 4);
DMIBAR32(0xf0) |= 3 << 24;
DMIBAR32(0xf04) = 0x07050880;
DMIBAR32(0xf44) = 0x07050880;
DMIBAR32(0xf84) = 0x07050880;
DMIBAR32(0xfc4) = 0x07050880;
/* lock down write-once registers
DMIBAR32(0x84) will be set in setup_aspm(). */
DMIBAR32(0x308) = DMIBAR32(0x308);
DMIBAR32(0x314) = DMIBAR32(0x314);
DMIBAR32(0x324) = DMIBAR32(0x324);
DMIBAR32(0x328) = DMIBAR32(0x328);
DMIBAR32(0x334) = DMIBAR32(0x334);
DMIBAR32(0x338) = DMIBAR32(0x338);
}
static void init_pcie(const int peg_enabled,
const int sdvo_enabled,
const int peg_x16)
{
const pci_devfn_t mch = PCI_DEV(0, 0, 0);
const pci_devfn_t pciex = PCI_DEV(0, 1, 0);
printk(BIOS_DEBUG, "PEG x%d %s, SDVO %s\n", peg_x16?16:1,
peg_enabled?"enabled":"disabled",
sdvo_enabled?"enabled":"disabled");
if (peg_enabled) {
pci_or_config8(mch, D0F0_DEVEN, 1 << 1);
pci_write_config8(pciex, 0x224,
(pci_read_config8(pciex, 0x224) & ~31) | (peg_x16 ? 16 : 0) | 1);
pci_and_config16(pciex, 0x224, ~(1 << 8));
/* FIXME: fill in: slot or fixed? -> devicetree */
int peg_is_slot = 0;
if (peg_is_slot) {
pci_or_config16(pciex, PEG_CAP, 1 << 8);
}
/* FIXME: fill in: slot number, slot power -> devicetree */
/* Use slot number 0 by now, slots on sb count from 1. */
int peg_slot = 0; /* unique within chassis */
/* peg_power := val * 10^-exp */
int peg_power_val = 75;
int peg_power_exp = 0; /* 0..3 */
const u32 tmp = (peg_slot << 17) | (peg_power_exp << 15) | (peg_power_val << 7);
pci_write_config32(pciex, SLOTCAP, tmp);
/* GPEs */
pci_or_config8(pciex, PEGLC, 7);
/* VC0: TC0 only, VC0 only */
pci_and_config8(pciex, D1F0_VC0RCTL, 1);
pci_and_config8(pciex, D1F0_VCCAP, ~7);
}
}
static void setup_aspm(const stepping_t stepping, const int peg_enabled)
{
u32 tmp32;
const pci_devfn_t pciex = PCI_DEV(0, 1, 0);
/* Prerequisites for ASPM: */
if (peg_enabled) {
pci_or_config32(pciex, 0x200, 3 << 13);
pci_and_config32(pciex, 0x0f0, ~((1 << 27) | (1 << 26)));
pci_or_config32(pciex, 0x0f0, 3 << 24);
pci_and_config32(pciex, 0x0f4, ~(1 << 4));
pci_or_config32(pciex, 0x0fc, 1 << 0);
pci_or_config32(pciex, 0x0fc, 1 << 1);
pci_or_config32(pciex, 0x0fc, 1 << 4);
pci_and_config32(pciex, 0x0fc, ~(7 << 5));
/* Set L0s, L1 supported in LCTL? */
pci_or_config32(pciex, 0x0b0, 3 << 0);
pci_or_config32(pciex, 0x0f0, 3 << 24);
tmp32 = pci_read_config32(pciex, 0x0f0);
if ((stepping >= STEPPING_B0) && (stepping <= STEPPING_B1))
tmp32 |= (1 << 31);
else if (stepping >= STEPPING_B2)
tmp32 &= ~(1 << 31);
pci_write_config32(pciex, 0x0f0, tmp32);
tmp32 = pci_read_config32(pciex, 0x0fc);
if ((stepping >= STEPPING_B0) && (stepping <= STEPPING_B1))
tmp32 |= (1 << 10);
else if (stepping >= STEPPING_B2)
tmp32 &= ~(1 << 10);
pci_write_config32(pciex, 0x0fc, tmp32);
tmp32 = pci_read_config32(pciex, 0x0fc);
if (stepping >= STEPPING_B2)
tmp32 |= (1 << 14);
pci_write_config32(pciex, 0x0fc, tmp32);
tmp32 = pci_read_config32(pciex, 0x0fc);
if (stepping >= STEPPING_B1)
tmp32 &= ~(1 << 13);
pci_write_config32(pciex, 0x0fc, tmp32);
}
DMIBAR8 (0x0e1c) |= (1 << 0);
DMIBAR16(0x0f00) |= (3 << 8);
DMIBAR16(0x0f00) |= (7 << 3);
DMIBAR32(0x0f14) &= ~(1 << 17);
DMIBAR16(0x0e1c) &= ~(1 << 8);
if (stepping >= STEPPING_B0) {
DMIBAR32(0x0e28 + 4) = (DMIBAR32(0x0e28 + 4) &
~(0xf << (52 - 32))) |
(0xd << (52 - 32));
DMIBAR32(0x0e2c) = 0x88d07333;
}
if (peg_enabled) {
pci_and_config32(pciex, 0xa08, ~(1 << 15));
pci_or_config32(pciex, 0xa84, 1 << 8);
pci_and_config32(pciex, 0xb14, ~(1 << 17));
pci_or_config32(pciex, 0xb00, 3 << 8);
pci_or_config32(pciex, 0xb00, 7 << 3);
pci_and_config32(pciex, 0xa84, ~(1 << 8));
pci_or_config32(pciex, 0xa84, 1 << 8);
pci_update_config32(pciex, 0xb04, ~(0x1f << 23), 0x0e << 23);
pci_or_config32(pciex, 0xb04, 1 << 31);
pci_update_config32(pciex, 0xb04, ~(0x03 << 29), 0x01 << 29);
}
/*\ Setup ASPM on DMI \*/
/* Exit latencies should be checked to be supported by
the endpoint (ICH), but ICH doesn't give any limits. */
if (LPC_IS_MOBILE(PCI_DEV(0, 0x1f, 0)))
DMIBAR8(0x88) |= (3 << 0); // enable ASPM L0s, L1 (write-once)
else
DMIBAR8(0x88) |= (1 << 0); // enable ASPM L0s (write-once)
/* timing */
DMIBAR32(0x84) = (DMIBAR32(0x84) & ~(63 << 12)) | (2 << 12) | (2 << 15);
DMIBAR8(0x208 + 3) = 0;
DMIBAR32(0x208) &= ~(3 << 20);
/*\ Setup ASPM on PEG \*/
/*
* Maybe we just have to advertise ASPM through LCAP[11:10]
* (LCAP[17:15] == 010b is the default, will be locked, as it's R/WO),
* set 0x208[31:24,23:22] to zero, 0x224[24:21] = 1 and let the
* generic ASPM code do the rest? - Nico
*/
/* TODO: Prepare PEG for ASPM. */
}
static void setup_rcrb(const int peg_enabled)
{
/*\ RCRB setup: Egress Port \*/
/* Set component ID of MCH (1). */
EPBAR8(EPESD + 2) = 1;
/* Link1: component ID 1, link valid. */
EPBAR32(EPLE1D) = (EPBAR32(EPLE1D) & 0xff000000) | (1 << 16) | (1 << 0);
EPBAR32(EPLE1A) = (uintptr_t)DEFAULT_DMIBAR;
if (peg_enabled)
/* Link2: link_valid. */
EPBAR8(EPLE2D) |= (1 << 0); /* link valid */
/*\ RCRB setup: DMI Port \*/
/* Set component ID of MCH (1). */
DMIBAR8(DMIESD + 2) = 1;
/* Link1: target port 0, component id 2 (ICH), link valid. */
DMIBAR32(DMILE1D) = (0 << 24) | (2 << 16) | (1 << 0);
DMIBAR32(DMILE1A) = (uintptr_t)DEFAULT_RCBA;
/* Link2: component ID 1 (MCH), link valid */
DMIBAR32(DMILE2D) =
(DMIBAR32(DMILE2D) & 0xff000000) | (1 << 16) | (1 << 0);
DMIBAR32(DMILE2A) = (uintptr_t)DEFAULT_MCHBAR;
}
void gm45_late_init(const stepping_t stepping)
{
const pci_devfn_t mch = PCI_DEV(0, 0, 0);
const int peg_enabled = (pci_read_config8(mch, D0F0_DEVEN) >> 1) & 1;
const int sdvo_enabled = (MCHBAR16(0x40) >> 8) & 1;
const int peg_x16 = (peg_enabled && !sdvo_enabled);
init_egress();
init_dmi(stepping >= STEPPING_B2);
init_pcie(peg_enabled, sdvo_enabled, peg_x16);
setup_aspm(stepping, peg_enabled);
setup_rcrb(peg_enabled);
}