- Bump the LinuxBIOS major version
- Rename chip_config chip_operations throughout the tree
- Fix Config.lb on most of the Opteron Ports
- Fix the amd 8000 chipset support for setting the subsystem vendor and device ids
- Add detection of devices that are on the motherboard (i.e. In Config.lb)
- Baby step in getting the resource limit handling correct, Ignore fixed resources
- Only call enable_childrens_resources on devices we know will have children
For some busses like i2c it is non-sense and we don't want it.
- Set the resource limits for pnp devices resources.
- Improve the resource size detection for pnp devices.
- Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels
- Added a header file to hold the prototype of isa_dma_init
- Fixed most of the superio chips so the should work now, the via superio pci device is the exception.
- The code compiles and runs so it is time for me to go to bed.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/southbridge/ricoh/rl5c476/chip.h b/src/southbridge/ricoh/rl5c476/chip.h
index d951a8a..5d7a2e3 100644
--- a/src/southbridge/ricoh/rl5c476/chip.h
+++ b/src/southbridge/ricoh/rl5c476/chip.h
@@ -1,7 +1,7 @@
#ifndef _SOUTHBRIDGE_RICOH_RL5C476
#define _SOUTHBRIDGE_RICOH_RL5C476
-extern struct chip_control southbridge_ricoh_rl5c476_control;
+extern struct chip_operations southbridge_ricoh_rl5c476_control;
struct southbridge_ricoh_rl5c476_config {
int num;
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c
index 1eed368..4240f96a 100644
--- a/src/southbridge/ricoh/rl5c476/rl5c476.c
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.c
@@ -77,22 +77,16 @@
}
-static void rl5c476_init(struct southbridge_rl5c476_config *conf)
+static void rl5c476_init(device_t dev)
{
//unsigned char enables;
- device_t dev;
pc16reg_t *pc16;
int i;
- printk_debug("rl5c476 init\n");
+#error "FIXME implement carbus bridge support"
+#error "FIXME this code is close to a but the conversion needs more work"
/* cardbus controller function 1 for CF Socket */
- dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0);
-
- if (!dev ){
- // probably an epia-m rather than mii
- printk_debug("No rl5c476 found\n");
- return;
- }
+ printk_debug("rl5c476 init\n");
/* setup pci header manually because 'pci_device.c' doesn't know how to handle
* pci to cardbus bridges - (header type 2 I think)
@@ -214,41 +208,21 @@
}
-static void southbridge_init(struct chip *chip, enum chip_pass pass)
-{
+static struct device_operations ricoh_rl5c476_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .inti = rl5c476_init,
+ .scan_bus = pci_scan_bridge,
+};
- struct southbridge_rl5c476_config *conf =
- (struct southbridge_rl5c476_config *)chip->chip_info;
+static struct pci_driver ricoh_rl5c476_driver __pci_driver = {
+ .ops = &ricoh_rl5c476_ops,
+ .vendor = PCI_VENDOR_ID_RICOH,
+ .device = PCI_DEVICE_ID_RICOH_RL5C476,
+};
- switch (pass) {
- case CONF_PASS_PRE_PCI:
- //rl5c476_pci_enable(conf);
- break;
-
- case CONF_PASS_POST_PCI:
- rl5c476_init(conf);
-
- break;
-
- case CONF_PASS_PRE_BOOT:
- //dump_south();
- break;
-
- default:
- /* nothing yet */
- break;
- }
-}
-
-static void enumerate(struct chip *chip)
-{
- extern struct device_operations default_pci_ops_bus;
- chip_enumerate(chip);
- chip->dev->ops = &default_pci_ops_bus;
-}
-
-struct chip_control southbridge_ricoh_rl5c476_control = {
- .enumerate = enumerate,
+struct chip_operations southbridge_ricoh_rl5c476_control = {
.enable = southbridge_init,
.name = "RICOH RL5C476"
};