mb/google/volteer/var/eldrid: change GPP_B2 to PLTRST
Change GPP_B2 (EN_PP3300_SSD) to PLTRST to avoid S3 resume hang.
BUG=b:174776411
BRANCH=none
TEST=none
Change-Id: Icfde6b57ff5f6e49ff7804eff6e6a5819bb784bc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
diff --git a/src/mainboard/google/volteer/variants/eldrid/gpio.c b/src/mainboard/google/volteer/variants/eldrid/gpio.c
index 8712f9c..47d42af 100644
--- a/src/mainboard/google/volteer/variants/eldrid/gpio.c
+++ b/src/mainboard/google/volteer/variants/eldrid/gpio.c
@@ -23,7 +23,7 @@
PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1),
/* B2 : VRALERT# ==> EN_PP3300_SSD */
- PAD_CFG_GPO(GPP_B2, 1, DEEP),
+ PAD_CFG_GPO(GPP_B2, 1, PLTRST),
/* B7 : ISH_12C1_SDA ==> ISH_I2C0_SENSOR_SDA */
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
/* B8 : ISH_I2C1_SCL ==> ISH_I2C0_SENSOR_SCL */
@@ -161,11 +161,6 @@
/* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = {
- /* C8 : UART0 RX */
- PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
- /* C9 : UART0 TX */
- PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
-
/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
/* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */
@@ -174,6 +169,8 @@
/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
PAD_CFG_GPI(GPP_A17, NONE, DEEP),
+ /* B2 : VRALERT# ==> EN_PP3300_SSD */
+ PAD_CFG_GPO(GPP_B2, 1, PLTRST),
/* B11 : PMCALERT# ==> PCH_WP_OD */
PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
@@ -187,6 +184,10 @@
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
PAD_CFG_GPO(GPP_C0, 1, DEEP),
+ /* C8 : UART0 RX */
+ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
+ /* C9 : UART0 TX */
+ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */