southbridge/intel/lynxpoint: use common Intel ACPI hardware definitions
Transition to using the common Intel ACPI hardware definitions
generic ACPI definitions.
BUG=chrome-os-partner:54977
Change-Id: I03051c1c1df3e64abeedd6370a440111ade59742
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15676
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c
index c8dc454..4f0db1b 100644
--- a/src/southbridge/intel/lynxpoint/smihandler.c
+++ b/src/southbridge/intel/lynxpoint/smihandler.c
@@ -124,10 +124,10 @@
/* Figure out SLP_TYP */
reg32 = inl(pmbase + PM1_CNT);
printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
- slp_typ = (reg32 >> 10) & 7;
+ slp_typ = acpi_sleep_from_pm1(reg32);
/* Do any mainboard sleep handling */
- mainboard_smi_sleep(slp_typ-2);
+ mainboard_smi_sleep(slp_typ);
/* USB sleep preparations */
#if !CONFIG_FINALIZE_USB_ROUTE_XHCI
@@ -138,30 +138,30 @@
#if CONFIG_ELOG_GSMI
/* Log S3, S4, and S5 entry */
- if (slp_typ >= 5)
- elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2);
+ if (slp_typ >= ACPI_S3)
+ elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ);
#endif
/* Next, do the deed.
*/
switch (slp_typ) {
- case SLP_TYP_S0:
+ case ACPI_S0:
printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
break;
- case SLP_TYP_S1:
+ case ACPI_S1:
printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n");
break;
- case SLP_TYP_S3:
+ case ACPI_S3:
printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
/* Invalidate the cache before going to S3 */
wbinvd();
break;
- case SLP_TYP_S4:
+ case ACPI_S4:
printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n");
break;
- case SLP_TYP_S5:
+ case ACPI_S5:
printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
/* Disable all GPE */
@@ -193,7 +193,7 @@
enable_pm1_control(SLP_EN);
/* Make sure to stop executing code here for S3/S4/S5 */
- if (slp_typ > 1)
+ if (slp_typ >= ACPI_S3)
halt();
/* In most sleep states, the code flow of this function ends at