chip soc/intel/cannonlake
	# Enable Enhanced Intel SpeedStep
	register "eist_enable" = "1"

	register "cpu_pl2_4_cfg" = "baseline"

	register "gen1_dec" = "0x00fc0201"
	register "gen2_dec" = "0x007c0a01"
	register "gen3_dec" = "0x000c03e1"
	register "gen4_dec" = "0x001c02e1"

	# GPIO
	register "PchUnlockGpioPads" = "1"
	register "gpe0_dw0" = "0x2"
	register "gpe0_dw1" = "0x3"
	register "gpe0_dw2" = "0xd"

	# FSP configuration
	register "SaGv" = "SaGv_Enabled"
	register "ScsEmmcHs400Enabled" = "1"

	# Enable eDP device
	register "DdiPortEdp" = "1" # Display Port

	# Enable HPD for DDI ports B/C
	register "DdiPortBHpd" = "1" # HDMI
	register "DdiPortCHpd" = "1" # USB Type-C

	# Enable DDC for DDI port B
	register "DdiPortBDdc" = "1" # HDMI

	register "PchHdaAudioLinkHda" = "1"

	# Misc
	register "AcousticNoiseMitigation" = "1"

	# Power
	register "PchPmSlpS3MinAssert"  = "3"	# 50ms
	register "PchPmSlpS4MinAssert"  = "1"	# 1s
	register "PchPmSlpSusMinAssert" = "2"	# 500ms
	register "PchPmSlpAMinAssert"   = "4"	# 2s

	register "tcc_offset" = "20" # TCC of 80C

	# Enable SERIRQ continuous
	register "serirq_mode" = "SERIRQ_CONTINUOUS"

	register "SkipExtGfxScan" = "1"

	register "enable_c6dram" = "1"

	register "SataPortsEnable[0]" = "1"
	register "SataPortsEnable[2]" = "1"

	register "PcieRpEnable[4]" = "1" # LAN1
	register "PcieRpEnable[5]" = "1" # LAN2
	register "PcieRpEnable[6]" = "1" # LAN3
	register "PcieRpEnable[7]" = "1" # LAN4
	register "PcieRpEnable[8]" = "1" # LAN5
	register "PcieRpEnable[9]" = "1" # LAN6
	register "PcieRpEnable[11]" = "1" # M.2 WiFi
	register "PcieRpEnable[12]" = "1" # M.2 NVMe x4

	# Enable Advanced Error Reporting for RP 5-10, 12, 13
	register "PcieRpAdvancedErrorReporting[4]" = "1"
	register "PcieRpAdvancedErrorReporting[5]" = "1"
	register "PcieRpAdvancedErrorReporting[6]" = "1"
	register "PcieRpAdvancedErrorReporting[7]" = "1"
	register "PcieRpAdvancedErrorReporting[8]" = "1"
	register "PcieRpAdvancedErrorReporting[9]" = "1"
	register "PcieRpAdvancedErrorReporting[11]" = "1"
	register "PcieRpAdvancedErrorReporting[12]" = "1"

	# Enable Latency Tolerance Reporting Mechanism RP 5-10, 12, 13
	register "PcieRpLtrEnable[4]" = "1"
	register "PcieRpLtrEnable[5]" = "1"
	register "PcieRpLtrEnable[6]" = "1"
	register "PcieRpLtrEnable[7]" = "1"
	register "PcieRpLtrEnable[8]" = "1"
	register "PcieRpLtrEnable[9]" = "1"
	register "PcieRpLtrEnable[11]" = "1"
	register "PcieRpLtrEnable[12]" = "1"

	register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE"
	register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE"
	register "PcieClkSrcUsage[2]" = "PCIE_CLK_FREE"
	register "PcieClkSrcUsage[3]" = "PCIE_CLK_FREE"
	register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE"
	register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE"

	# USB related
	register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
					      USB_PORT_WAKE_ENABLE(2) | \
					      USB_PORT_WAKE_ENABLE(3) | \
					      USB_PORT_WAKE_ENABLE(4) | \
					      USB_PORT_WAKE_ENABLE(5) | \
					      USB_PORT_WAKE_ENABLE(6) | \
					      USB_PORT_WAKE_ENABLE(7) | \
					      USB_PORT_WAKE_ENABLE(8) | \
					      USB_PORT_WAKE_ENABLE(9)"

	register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
					      USB_PORT_WAKE_ENABLE(2) | \
					      USB_PORT_WAKE_ENABLE(3) | \
					      USB_PORT_WAKE_ENABLE(4)"

	register "PchUsb2PhySusPgDisable" = "1"

	register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)"
	register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"		# M2 WiFi
	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)"		# 4G/LTE
	register "usb2_ports[9]" = "USB2_PORT_EMPTY"

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[4]" = "USB3_PORT_EMPTY"
	register "usb3_ports[5]" = "USB3_PORT_EMPTY"

	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5] = PchSerialIoDisabled,
		[PchSerialIoIndexSPI0] = PchSerialIoDisabled,
		[PchSerialIoIndexSPI1] = PchSerialIoDisabled,
		[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
	}"

	device cpu_cluster 0 on	end
	device domain 0 on
		device pci 00.0 on  end # Host Bridge
		device pci 02.0 on  end # Integrated Graphics Device
		device pci 04.0 on  end # SA Thermal device
		device pci 08.0 off end # Gaussian Mixture Model
		device pci 12.0 on  end # Thermal Subsystem
		device pci 12.5 off end # UFS SCS
		device pci 12.6 off end # GSPI #2
		device pci 14.0 on  end # USB xHCI
		device pci 14.1 off end # USB xDCI (OTG)
		device pci 14.5 off end # SDCard
		device pci 15.0 off end # I2C #0
		device pci 15.1 off end # I2C #1
		device pci 15.2 off end # I2C #2
		device pci 15.3 off end # I2C #3
		device pci 16.0 on  end # Management Engine Interface 1
		device pci 16.1 off end # Management Engine Interface 2
		device pci 16.2 off end # Management Engine IDE-R
		device pci 16.3 off end # Management Engine KT Redirection
		device pci 16.4 off end # Management Engine Interface 3
		device pci 16.5 off end # Management Engine Interface 4
		device pci 17.0 on  end # SATA
		device pci 19.0 off end # I2C #4
		device pci 19.1 off end # I2C #5
		device pci 19.2 off end # UART #2
		device pci 1a.0 on  end # eMMC
		device pci 1c.0 off end # PCI Express Port 1
		device pci 1c.1 off end # PCI Express Port 2
		device pci 1c.2 off end # PCI Express Port 3
		device pci 1c.3 off end # PCI Express Port 4
		device pci 1c.4 on  end # PCI Express Port 5  LAN1
		device pci 1c.5 on  end # PCI Express Port 6  LAN2
		device pci 1c.6 on  end # PCI Express Port 7  LAN3
		device pci 1c.7 on  end # PCI Express Port 8  LAN4
		device pci 1d.0 on  end # PCI Express Port 9  LAN5
		device pci 1d.1 on  end # PCI Express Port 10 LAN6
		device pci 1d.2 off end # PCI Express Port 11
		device pci 1d.3 on  end # PCI Express Port 12 M.2 WiFi
			smbios_slot_desc	"SlotTypeM2Socket1_SD" "SlotLengthOther"
						"M.2/E 2230 (M2_WIFI2)" "SlotDataBusWidth1X"
		device pci 1d.4 on      # PCI Express Port 13 NVMe
			smbios_slot_desc	"SlotTypeM2Socket3" "SlotLengthOther"
						"M.2/M 2280 (J1)" "SlotDataBusWidth4X"
		end
		device pci 1d.5 off end # PCI Express Port 14
		device pci 1d.6 off end # PCI Express Port 15
		device pci 1d.7 off end # PCI Express Port 16
		device pci 1e.0 off end # UART #0
		device pci 1e.1 off end # UART #1
		device pci 1e.2 off end # GSPI #0
		device pci 1e.3 off end # GSPI #1
		device pci 1f.0 on
			chip superio/ite/it8784e
				register "TMPIN1.mode"    = "THERMAL_RESISTOR"
				register "TMPIN2.mode"    = "THERMAL_MODE_DISABLED"
				register "TMPIN3.mode"    = "THERMAL_PECI"
				register "TMPIN3.offset"  = "0x63"
				register "ec.vin_mask"    = "VIN_ALL"
				register "ec.smbus_24mhz" = "1"
				register "ec.smbus_en"    = "1"
				# FAN1 is CPU fan (connector on board)
				register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
				register "FAN1.smart.tmpin"     = " 3"
				register "FAN1.smart.tmp_off"   = "40"
				register "FAN1.smart.tmp_start" = "60"
				register "FAN1.smart.tmp_full"  = "85"
				register "FAN1.smart.tmp_delta" = " 2"
				register "FAN1.smart.pwm_start" = "20"
				register "FAN1.smart.slope"     = "24"
				register "FAN2.mode"      = "FAN_MODE_OFF"
				register "FAN3.mode"      = "FAN_MODE_OFF"
				device pnp 2e.1 on	# COM 1
					io 0x60 = 0x3f8
					irq 0x70 = 4
				end
				device pnp 2e.2 on end # COM 2
				device pnp 2e.3 off end # Printer Port
				device pnp 2e.4 on	# Environment Controller
					io 0x60 = 0xa40
					io 0x62 = 0xa30
					irq 0x70 = 9
					irq 0xf0 = 0x80 # clear 3VSB status
				end
				device pnp 2e.5 off end	# Keyboard
				device pnp 2e.6 off end	# Mouse
				device pnp 2e.7 off end	# GPIO
				device pnp 2e.a off end	# CIR
			end
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end # LPC Interface
		device pci 1f.1 hidden end # P2SB
		device pci 1f.2 hidden end # Power Management Controller
		device pci 1f.3 on  end # Intel HDA
		device pci 1f.4 on  end # SMBus
		device pci 1f.5 on  end # PCH SPI
		device pci 1f.6 off end # GbE
	end
end