diff --git a/src/drivers/soundwire/alc1308/alc1308.c b/src/drivers/soundwire/alc1308/alc1308.c
new file mode 100644
index 0000000..df60d47
--- /dev/null
+++ b/src/drivers/soundwire/alc1308/alc1308.c
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpigen.h>
+#include <acpi/acpi_device.h>
+#include <acpi/acpi_soundwire.h>
+#include <device/device.h>
+#include <device/path.h>
+#include <device/mipi_ids.h>
+#include <device/soundwire.h>
+#include <stdio.h>
+
+#include "chip.h"
+
+static struct soundwire_address alc1308_address = {
+	.version = SOUNDWIRE_VERSION_1_1,
+	.manufacturer_id = MIPI_MFG_ID_REALTEK,
+	.part_id = MIPI_DEV_ID_REALTEK_ALC1308,
+	.class = MIPI_CLASS_NONE
+};
+
+static struct soundwire_slave alc1308_slave = {
+	.wake_up_unavailable = false,
+	.test_mode_supported = false,
+	.clock_stop_mode1_supported = true,
+	.simplified_clockstopprepare_sm_supported = true,
+	.clockstopprepare_hard_reset_behavior = false,
+	.highPHY_capable = false,
+	.paging_supported = false,
+	.bank_delay_supported = false,
+	.port15_read_behavior = false,
+	.source_port_list = SOUNDWIRE_PORT(2) | SOUNDWIRE_PORT(4),
+	.sink_port_list = SOUNDWIRE_PORT(1)
+};
+
+static struct soundwire_audio_mode alc1308_audio_mode = {
+	/* Bus frequency must be 1/2/4/8 divider of supported input frequencies. */
+	.bus_frequency_configs_count = 12,
+	.bus_frequency_configs = {
+		9600 * KHz,  4800 * KHz, 2400 * KHz, 1200 * KHz, /* 9.6 MHz */
+		12000 * KHz, 6000 * KHz, 3000 * KHz, 1500 * KHz,  /* 12 MHz */
+		12288 * KHz, 6144 * KHz, 3072 * KHz, 1536 * KHz  /* 12.288 MHz */
+	},
+	/* Support 16 KHz to 96 KHz sampling frequency */
+	.sampling_frequency_configs_count = 8,
+	.sampling_frequency_configs = {
+		16 * KHz,
+		22.05 * KHz,
+		24 * KHz,
+		32 * KHz,
+		44.1 * KHz,
+		48 * KHz,
+		88.2 * KHz,
+		96 * KHz,
+	},
+	.prepare_channel_behavior = CHANNEL_PREPARE_ANY_FREQUENCY
+};
+
+static struct soundwire_dpn alc1308_dp1 = {
+	.port_wordlength_configs_count = 1,
+	.port_wordlength_configs = { 32 },
+	.data_port_type = FULL_DATA_PORT,
+	.max_grouping_supported = BLOCK_GROUP_COUNT_1,
+	.simplified_channelprepare_sm = false,
+	.imp_def_dpn_interrupts_supported = 0,
+	.min_channel_number = 1,
+	.max_channel_number = 2,
+	.modes_supported = MODE_ISOCHRONOUS | MODE_TX_CONTROLLED |
+			   MODE_RX_CONTROLLED | MODE_FULL_ASYNCHRONOUS,
+	.block_packing_mode = true,
+	.port_audio_mode_count = 1,
+	.port_audio_mode_list = { 0 }
+};
+
+static const struct soundwire_codec alc1308_codec = {
+	.slave = &alc1308_slave,
+	.audio_mode = { &alc1308_audio_mode },
+	.dpn = {
+		{
+			/* Data Input for Speaker Path */
+			.port = 1,
+			.sink = &alc1308_dp1
+		},
+		{
+			/* Data out for I.V sensing */
+			.port = 2,
+			.source = &alc1308_dp1
+		},
+		{
+			/* Data out for I.V sensing */
+			.port = 4,
+			.source = &alc1308_dp1
+		}
+	}
+
+};
+
+static void soundwire_alc1308_fill_ssdt(const struct device *dev)
+{
+	struct drivers_soundwire_alc1308_config *config = dev->chip_info;
+	const char *scope = acpi_device_scope(dev);
+	struct acpi_dp *dsd;
+
+	if (!dev->enabled || !scope)
+		return;
+
+	acpigen_write_scope(scope);
+	acpigen_write_device(acpi_device_name(dev));
+
+	/* Set codec address IDs. */
+	alc1308_address.link_id = dev->path.generic.id;
+	alc1308_address.unique_id = dev->path.generic.subid;
+
+	acpigen_write_ADR_soundwire_device(&alc1308_address);
+	acpigen_write_name_string("_DDN", config->desc ? : dev->chip_ops->name);
+	acpigen_write_STA(acpi_device_status(dev));
+
+	dsd = acpi_dp_new_table("_DSD");
+	soundwire_gen_codec(dsd, &alc1308_codec, NULL);
+	acpi_dp_write(dsd);
+
+	acpigen_pop_len(); /* Device */
+	acpigen_pop_len(); /* Scope */
+}
+
+static const char *soundwire_alc1308_acpi_name(const struct device *dev)
+{
+	struct drivers_soundwire_alc1308_config *config = dev->chip_info;
+	static char name[5];
+
+	if (config->name)
+		return config->name;
+	snprintf(name, sizeof(name), "SW%1X%1X", dev->path.generic.id, dev->path.generic.subid);
+	return name;
+}
+
+static struct device_operations soundwire_alc1308_ops = {
+	.read_resources		= noop_read_resources,
+	.set_resources		= noop_set_resources,
+	.acpi_name		= soundwire_alc1308_acpi_name,
+	.acpi_fill_ssdt		= soundwire_alc1308_fill_ssdt,
+};
+
+static void soundwire_alc1308_enable(struct device *dev)
+{
+	dev->ops = &soundwire_alc1308_ops;
+}
+
+struct chip_operations drivers_soundwire_alc1308_ops = {
+	CHIP_NAME("Realtek ALC1308 SoundWire Codec")
+	.enable_dev = soundwire_alc1308_enable
+};