soc/amd/common: Refactor SMBus base arguments
Replace SMBus base addresses with proper symbols.
Change-Id: I5e0ebd7609c5c83d0e443ffba74dae68017d3ebc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42074
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/soc/amd/common/block/include/amdblocks/acpimmio_map.h b/src/soc/amd/common/block/include/amdblocks/acpimmio_map.h
index abf014c..69cc57a 100644
--- a/src/soc/amd/common/block/include/amdblocks/acpimmio_map.h
+++ b/src/soc/amd/common/block/include/amdblocks/acpimmio_map.h
@@ -126,10 +126,6 @@
#define ACPIMMIO_ACDCTMR_BANK 0x1d00
#define ACPIMMIO_AOAC_BANK 0x1e00
-/* FIXME: Passing host base for SMBUS is not long-term solution. */
-#define ACPIMMIO_ASF_BASE (AMD_SB_ACPI_MMIO_ADDR + ACPIMMIO_ASF_BANK)
-#define ACPIMMIO_SMBUS_BASE (AMD_SB_ACPI_MMIO_ADDR + ACPIMMIO_SMBUS_BANK)
-
#endif
#endif /* AMD_BLOCK_ACPIMMIO_MAP_H */
diff --git a/src/soc/amd/common/block/smbus/sm.c b/src/soc/amd/common/block/smbus/sm.c
index c5c1ed8..28e662c 100644
--- a/src/soc/amd/common/block/smbus/sm.c
+++ b/src/soc/amd/common/block/smbus/sm.c
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-#include <amdblocks/acpimmio_map.h>
+#include <amdblocks/acpimmio.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
@@ -27,9 +27,9 @@
pbus = get_pbus_smbus(dev);
res = find_resource(pbus->dev, 0x90);
if (res->base == SMB_BASE_ADDR)
- return ACPIMMIO_SMBUS_BASE;
+ return (uintptr_t)acpimmio_smbus;
- return ACPIMMIO_ASF_BASE;
+ return (uintptr_t)acpimmio_asf;
}
static int lsmbus_recv_byte(struct device *dev)
diff --git a/src/soc/amd/common/block/smbus/smbus.c b/src/soc/amd/common/block/smbus/smbus.c
index 4fb68d4..9fd18c5 100644
--- a/src/soc/amd/common/block/smbus/smbus.c
+++ b/src/soc/amd/common/block/smbus/smbus.c
@@ -4,8 +4,8 @@
#include <console/console.h>
#include <device/smbus_host.h>
#include <amdblocks/acpimmio.h>
-#include <amdblocks/acpimmio_map.h>
#include <amdblocks/smbus.h>
+#include <soc/southbridge.h>
/*
* Between 1-10 seconds, We should never timeout normally
@@ -13,37 +13,27 @@
*/
#define SMBUS_TIMEOUT (100 * 1000 * 10)
-static u8 controller_read8(uintptr_t base, u8 reg)
+/* FIXME: Passing host base for SMBUS is not long-term solution.
+ It is possible to have multiple buses behind same host. */
+
+static u8 controller_read8(const uintptr_t base, const u8 reg)
{
- switch (base) {
- case ACPIMMIO_SMBUS_BASE:
- return smbus_read8(reg);
- case ACPIMMIO_ASF_BASE:
- return asf_read8(reg);
- default:
- printk(BIOS_ERR, "Error attempting to read SMBus at address 0x%lx\n",
- base);
- }
- return 0xff;
+ return read8((void *)(base + reg));
}
-static void controller_write8(uintptr_t base, u8 reg, u8 val)
+static void controller_write8(const uintptr_t base, const u8 reg, const u8 val)
{
- switch (base) {
- case ACPIMMIO_SMBUS_BASE:
- smbus_write8(reg, val);
- break;
- case ACPIMMIO_ASF_BASE:
- asf_write8(reg, val);
- break;
- default:
- printk(BIOS_ERR, "Error attempting to write SMBus at address 0x%lx\n",
- base);
- }
+ write8((void *)(base + reg), val);
}
static int smbus_wait_until_ready(uintptr_t mmio)
{
+ if ((mmio != (uintptr_t)acpimmio_smbus) &&
+ (mmio != (uintptr_t)acpimmio_asf)) {
+ printk(BIOS_ERR, "Invalid SMBus or ASF base %#zx\n", mmio);
+ return -1;
+ }
+
u32 loops;
loops = SMBUS_TIMEOUT;
do {
diff --git a/src/soc/amd/stoneyridge/smbus_spd.c b/src/soc/amd/stoneyridge/smbus_spd.c
index 7c54d8d..773aad1 100644
--- a/src/soc/amd/stoneyridge/smbus_spd.c
+++ b/src/soc/amd/stoneyridge/smbus_spd.c
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/agesawrapper.h>
-#include <amdblocks/acpimmio_map.h>
+#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/device.h>
@@ -34,7 +34,7 @@
dev_addr = (SmbusSlaveAddress >> 1);
/* Read the first SPD byte */
- error = do_smbus_read_byte(ACPIMMIO_SMBUS_BASE, dev_addr, 0);
+ error = do_smbus_read_byte((uintptr_t)acpimmio_smbus, dev_addr, 0);
if (error < 0) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;
@@ -44,7 +44,7 @@
/* Read the remaining SPD bytes using do_smbus_recv_byte for speed */
for (index = 1 ; index < count ; index++) {
- error = do_smbus_recv_byte(ACPIMMIO_SMBUS_BASE, dev_addr);
+ error = do_smbus_recv_byte((uintptr_t)acpimmio_smbus, dev_addr);
if (error < 0) {
printk(BIOS_ERR, "-------------SPD READ ERROR-----------\n");
return error;