mainboard/biostar: Add support for Biostar AM1ML ver7.x
Adds AM1ML board. This board has AM1 Socket and supports all
new AM1 APUs from AMD. Based on asrock/imb-a180 board.
Successfully tested with SeaBIOS and Linux 3.8.x and Windows XP.
Successfully tested audio, video, network, PS/2 keyboard and mouse,
PCIe x16, COM port, SATA and USB.
LPT port is not tested yet and it’s unknown if it’s work.
Change-Id: I9ebb9acc590d38e47579adc263f45ae3f607684e
Signed-off-by: Sergej Ivanov <getinaks@gmail.com>
Reviewed-on: http://review.coreboot.org/9293
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
diff --git a/src/mainboard/biostar/am1ml/BiosCallOuts.c b/src/mainboard/biostar/am1ml/BiosCallOuts.c
new file mode 100644
index 0000000..b110e98
--- /dev/null
+++ b/src/mainboard/biostar/am1ml/BiosCallOuts.c
@@ -0,0 +1,163 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Sergej Ivanov <getinaks@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/azalia.h>
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#include <stdlib.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip (from linux, running under vendor bios)
+ */
+const CODEC_ENTRY Alc662_VerbTbl[] =
+{
+ { 0x14, 0x01014410 },
+ { 0x15, 0x411111f0 },
+ { 0x16, 0x411111f0 },
+ { 0x18, 0x01a19c30 },
+ { 0x19, 0x02a19c40 },
+ { 0x1a, 0x0181343f },
+ { 0x1b, 0x02214c20 },
+ { 0x1c, 0x411111f0 },
+ { 0x1d, 0x4004c601 },
+ { 0x1e, 0x411111f0 },
+ { 0xff, 0xffffffff }
+};
+
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0662, (CODEC_ENTRY*)&Alc662_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ AMD_CONFIG_PARAMS *StdHeader = ConfigPtr;
+
+ if (StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET \n");
+ FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams_reset->FchReset.Xhci1Enable = FALSE;
+ FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE);
+ FchParams_reset->FchReset.SataEnable = 1;
+ FchParams_reset->FchReset.IdeEnable = 0;
+ } else if (StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV\n");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)(&CodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ FchParams_env->Imc.ImcEnable = FALSE;
+ FchParams_env->Hwm.HwMonitorEnable = FALSE;
+ FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
+
+ /* sata configuration */
+ printk(BIOS_DEBUG, "Configuring SATA: selected mode = ");
+ FchParams_env->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
+ switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { // code from olivehillplus (ft3b) - only one place where sata is configured
+ case SataLegacyIde:
+ case SataRaid:
+ case SataAhci:
+ case SataAhci7804:
+ FchParams_env->Sata.SataIdeMode = FALSE;
+ printk(BIOS_DEBUG, "AHCI or RAID or IDE = %x\n", CONFIG_HUDSON_SATA_MODE);
+ break;
+
+ case SataIde2Ahci:
+ case SataIde2Ahci7804:
+ default: /* SataNativeIde */
+ FchParams_env->Sata.SataIdeMode = TRUE;
+ printk(BIOS_DEBUG, "IDE2AHCI = %x\n", CONFIG_HUDSON_SATA_MODE);
+ break;
+ }
+ /* XHCI configuration */
+ FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams_env->Usb.Xhci1Enable = FALSE;
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}