nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeout
Especially on ICH7 failing to do so results in i2c block read being
unusable. On ICH10 this problem doesn't manifest itself that much.
This moves disabling the watchdog reboot to the northbridge code like
i945 (even though it technically is southbridge stuff).
TESTED on Intel DG41WV: hacking on raminit is much nicer since no
need to do a hard power down for +4s are needed to clear the timeouts.
Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
diff --git a/src/northbridge/intel/x4x/early_init.c b/src/northbridge/intel/x4x/early_init.c
index 27fe916..fbdbcb4 100644
--- a/src/northbridge/intel/x4x/early_init.c
+++ b/src/northbridge/intel/x4x/early_init.c
@@ -58,6 +58,13 @@
pci_write_config8(d0f0, D0F0_PAM(5), 0x33);
pci_write_config8(d0f0, D0F0_PAM(6), 0x33);
+ printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
+ RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */
+ outw(1 << 11, DEFAULT_PMBASE + 0x60 + 0x08); /* halt timer */
+ outw(1 << 3, DEFAULT_PMBASE + 0x60 + 0x04); /* clear timeout */
+ outw(1 << 1, DEFAULT_PMBASE + 0x60 + 0x06); /* clear 2nd timeout */
+ printk(BIOS_DEBUG, " done.\n");
+
if (!(pci_read_config32(d0f0, D0F0_CAPID0 + 4) & (1 << (46 - 32)))) {
/* Enable internal GFX */
pci_write_config32(d0f0, D0F0_DEVEN, BOARD_DEVEN);