slippy: Add on-board devices and configure GPIO irq/wake
Add the onboard I2C devices for Slippy trackpad/lightsensor
and generate SMBIOS Type41 tables for them.
Add ACPI device for the trackpad to expose the interrupt map
to the OS so it can be used.
Configure interrupt GPIOs as PIRQ type and wake GPIOs as
just standard input type. The wake GPIO is reconfigured as
ACPI SCI in the specific device _DSW method. This prevents
the wake GPIO from generating a flood of SCI at runtime.
LTE_WAKE_L_Q and WLAN_WAKE_L_Q are left as ACPI SCI as these
are not repurposed interrupt pins so they are not generated
at runtime.
SIM_DET and ALS_INT_L are set as input since we don't have an
interrupt handler for them.
tested on slippy with trackpad with additional
kernel changes to chromeos_laptop.c to initialize devices.
1) Ensure trackpad interrupt is functional and that there
is not a flood of ACPI SCI when trackpad does interrupt:
9: 1 0 0 0 IO-APIC-fasteoi acpi
37: 421 0 0 0 IO-APIC-fasteoi cyapa
2) Ensure that devices are exposed as wake capable:
Device S-state Status Sysfs node
TPAD S3 *enabled pnp:00:00
TSCR S3 *disabled pnp:00:01
3) Ensure that trackpad can wake from S3 by default, but
that it does not cause an immediate wake when entering suspend.
4) Ensure that trackpad can be disabled as a wake source with
echo TPAD > /proc/acpi/wakeup
Change-Id: Id562d20b54eeefec56040b8f70ef238911312628
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/56622
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4190
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/mainboard/google/slippy/acpi/mainboard.asl b/src/mainboard/google/slippy/acpi/mainboard.asl
index 948d7df..0047772 100644
--- a/src/mainboard/google/slippy/acpi/mainboard.asl
+++ b/src/mainboard/google/slippy/acpi/mainboard.asl
@@ -19,6 +19,8 @@
* MA 02110-1301 USA
*/
+#include <mainboard/google/slippy/onboard.h>
+
Scope (\_SB)
{
Device (LID0)
@@ -35,4 +37,74 @@
{
Name(_HID, EisaId("PNP0C0C"))
}
+
+ Device (TPAD)
+ {
+ Name (_ADR, 0x0)
+ Name (_UID, 1)
+
+ // Report as a Sleep Button device so Linux will
+ // automatically enable it as a wake source
+ Name (_HID, EisaId("PNP0C0E"))
+
+ Name (_CRS, ResourceTemplate()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+
+ VendorShort (ADDR)
+ {
+ BOARD_TRACKPAD_I2C_ADDR
+ }
+ })
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+ }
+
+ Device (TSCR)
+ {
+ Name (_ADR, 0x0)
+ Name (_UID, 2)
+
+ // Report as a Sleep Button device so Linux will
+ // automatically enable it as a wake source
+ Name (_HID, EisaId("PNP0C0E"))
+
+ Name (_CRS, ResourceTemplate()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveLow)
+ {
+ BOARD_TOUCHSCREEN_IRQ
+ }
+
+ VendorShort (ADDR)
+ {
+ BOARD_TOUCHSCREEN_I2C_ADDR
+ }
+ })
+
+ Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TOUCHSCREEN_WAKE_GPIO, Local0)
+
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+ }
}
diff --git a/src/mainboard/google/slippy/gpio.h b/src/mainboard/google/slippy/gpio.h
index 7fb670b..4b557ce 100644
--- a/src/mainboard/google/slippy/gpio.h
+++ b/src/mainboard/google/slippy/gpio.h
@@ -35,7 +35,7 @@
LP_GPIO_INPUT, /* 9: RAM_ID1 */
LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
LP_GPIO_UNUSED, /* 11: UNUSED */
- LP_GPIO_IRQ_EDGE, /* 12: TRACKPAD_INT_L */
+ LP_GPIO_INPUT, /* 12: TRACKPAD_INT_L (WAKE) */
LP_GPIO_INPUT, /* 13: RAM_ID0 */
LP_GPIO_INPUT, /* 14: EC_IN_RW */
LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
@@ -48,7 +48,7 @@
LP_GPIO_UNUSED, /* 22: UNUSED */
LP_GPIO_UNUSED, /* 23: UNUSED */
LP_GPIO_UNUSED, /* 24: UNUSED */
- LP_GPIO_IRQ_EDGE, /* 25: TOUCH_INT_L */
+ LP_GPIO_INPUT, /* 25: TOUCH_INT_L (WAKE) */
LP_GPIO_UNUSED, /* 26: UNUSED */
LP_GPIO_UNUSED, /* 27: UNUSED */
LP_GPIO_UNUSED, /* 28: UNUSED */
@@ -74,10 +74,10 @@
LP_GPIO_UNUSED, /* 48: UNUSED */
LP_GPIO_OUT_LOW, /* 49: PP3300_SSD_IO_EN (iSSD VCC_IO) */
LP_GPIO_UNUSED, /* 50: UNUSED */
- LP_GPIO_IRQ_EDGE, /* 51: ALS_INT_L */
- LP_GPIO_IRQ_EDGE, /* 52: SIM_DET */
- LP_GPIO_ACPI_SCI, /* 53: TRACKPAD_INT_DX (WAKE) */
- LP_GPIO_ACPI_SCI, /* 54: TOUCH_INT_L_DX (WAKE) */
+ LP_GPIO_INPUT, /* 51: ALS_INT_L */
+ LP_GPIO_INPUT, /* 52: SIM_DET */
+ LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX (PIRQV) */
+ LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX (PIRQW) */
LP_GPIO_UNUSED, /* 55: UNUSED */
LP_GPIO_UNUSED, /* 56: UNUSED */
LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
diff --git a/src/mainboard/google/slippy/mainboard.c b/src/mainboard/google/slippy/mainboard.c
index 0159bd0..3bf26e3 100644
--- a/src/mainboard/google/slippy/mainboard.c
+++ b/src/mainboard/google/slippy/mainboard.c
@@ -20,6 +20,7 @@
#include <types.h>
#include <string.h>
+#include <smbios.h>
#include <device/device.h>
#include <device/device.h>
#include <device/pci_def.h>
@@ -36,6 +37,7 @@
#include "hda_verb.h"
#include <southbridge/intel/lynxpoint/pch.h>
#include "ec.h"
+#include "onboard.h"
void mainboard_suspend_resume(void)
{
@@ -145,12 +147,48 @@
mainboard_ec_init();
}
+static int mainboard_smbios_data(device_t dev, int *handle,
+ unsigned long *current)
+{
+ int len = 0;
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_LIGHTSENSOR_NAME, /* name */
+ BOARD_LIGHTSENSOR_IRQ, /* instance */
+ BOARD_LIGHTSENSOR_I2C_BUS, /* segment */
+ BOARD_LIGHTSENSOR_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_TRACKPAD_NAME, /* name */
+ BOARD_TRACKPAD_IRQ, /* instance */
+ BOARD_TRACKPAD_I2C_BUS, /* segment */
+ BOARD_TRACKPAD_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_TOUCHSCREEN_NAME, /* name */
+ BOARD_TOUCHSCREEN_IRQ, /* instance */
+ BOARD_TOUCHSCREEN_I2C_BUS, /* segment */
+ BOARD_TOUCHSCREEN_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ return len;
+}
+
// mainboard_enable is executed as first thing after
// enumerate_buses().
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
+ dev->ops->get_smbios_data = mainboard_smbios_data;
#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
diff --git a/src/mainboard/google/slippy/onboard.h b/src/mainboard/google/slippy/onboard.h
new file mode 100644
index 0000000..23e8f1e
--- /dev/null
+++ b/src/mainboard/google/slippy/onboard.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef ONBOARD_H
+#define ONBOARD_H
+
+#define BOARD_LIGHTSENSOR_NAME "lightsensor"
+#define BOARD_LIGHTSENSOR_IRQ 51 /* PIRQT */
+#define BOARD_LIGHTSENSOR_I2C_BUS 2 /* I2C1 */
+#define BOARD_LIGHTSENSOR_I2C_ADDR 0x44
+
+#define BOARD_TRACKPAD_NAME "trackpad"
+#define BOARD_TRACKPAD_IRQ 37 /* PIRQV */
+#define BOARD_TRACKPAD_WAKE_GPIO 12 /* GPIO12 */
+#define BOARD_TRACKPAD_I2C_BUS 1 /* I2C0 */
+#define BOARD_TRACKPAD_I2C_ADDR 0x67
+
+#define BOARD_TOUCHSCREEN_NAME "touchscreen"
+#define BOARD_TOUCHSCREEN_IRQ 38 /* PIRQW */
+#define BOARD_TOUCHSCREEN_WAKE_GPIO 25 /* GPIO25 */
+#define BOARD_TOUCHSCREEN_I2C_BUS 2 /* I2C1 */
+#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4a
+
+#endif