Remove duplicate VGA BIOS interrupt handlers

Some boards have two instances of the int15 handler that supports
the onboard VGA BIOS, for YABEL and realmode.
These are now similar enough that they can be deduplicated.

Due to minor differences this requires manual effort.

Change-Id: I03ae314cb90dd65d96591ce448504aa961cbeb88
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1893
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/mainboard/intel/emeraldlake2/mainboard.c b/src/mainboard/intel/emeraldlake2/mainboard.c
index f6fe405..5d9e96a 100644
--- a/src/mainboard/intel/emeraldlake2/mainboard.c
+++ b/src/mainboard/intel/emeraldlake2/mainboard.c
@@ -42,13 +42,13 @@
 	outb(0xcb, 0xb2);
 }
 
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN
 static int int15_handler(void)
 {
 	int res=0;
 
-	printk(BIOS_DEBUG, "%s: INT15 function %04x!\n",
-			__func__, X86_EAX & 0xffff);
+	printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
+			  __func__, X86_AX, X86_BX, X86_CX, X86_DX);
 
 	switch(X86_EAX & 0xffff) {
 	case 0x5f34:
@@ -140,66 +140,6 @@
 }
 #endif
 
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
-static int int15_handler(void)
-{
-	printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
-			  __func__, X86_AX, X86_BX, X86_CX, X86_DX);
-
-	switch (X86_AX) {
-	case 0x5f34:
-		/*
-		 * Set Panel Fitting Hook:
-		 *  bit 2 = Graphics Stretching
-		 *  bit 1 = Text Stretching
-		 *  bit 0 = Centering (do not set with bit1 or bit2)
-		 */
-		X86_AX = 0x005f;
-		X86_CX = 0x0001;
-		break;
-	case 0x5f35:
-		/*
-		 * Boot Display Device Hook:
-		 *  bit 0 = CRT
-		 *  bit 1 = TV (eDP) *
-		 *  bit 2 = EFP *
-		 *  bit 3 = LFP
-		 *  bit 4 = CRT2
-		 *  bit 5 = TV2 (eDP) *
-		 *  bit 6 = EFP2 *
-		 *  bit 7 = LFP2
-		 */
-		X86_AX = 0x005f;
-		X86_CX = 0x0000;
-		break;
-	case 0x5f51:
-		/*
-		 * Hook to select active LFP configuration:
-		 *  00h = No LVDS, VBIOS does not enable LVDS
-		 *  01h = Int-LVDS, LFP driven by integrated LVDS decoder
-		 *  02h = SVDO-LVDS, LFP driven by SVDO decoder
-		 *  03h = eDP, LFP Driven by Int-DisplayPort encoder
-		 */
-		X86_AX = 0x005f;
-		X86_CX = 3;
-		break;
-	case 0x5f70:
-		/* Unknown */
-		X86_AX = 0x005f;
-		X86_CX = 0;
-		break;
-	default:
-		/* Interrupt was not handled */
-		printk(BIOS_DEBUG, "Unknown INT15 function: 0x%04x\n",
-			X86_AX);
-		return 0;
-	}
-
-	/* Interrupt handled */
-	return 1;
-}
-#endif
-
 /* Audio Setup */
 
 extern const u32 * cim_verb_data;