mb/google/brox: Enable HDA Codec ALC256
On Brox, HDA Codec used is ALC256. Add verb table for the same. Also,
add the related device tree changes for HDA related registers.
Realtek High Definition Audio Configuration-
Version : 5.0.3.1
BUG=b:317398558
BRANCH=None
TEST=verified HDA on Brox.
HDA Sound cards detected. Headphone working verified.
Device listed under sysfs as below:
cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name
ID 256
cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name
Realtek
Change-Id: I1edd5aee053debe39b34048266703031c088cd00
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79723
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/google/brox/Kconfig b/src/mainboard/google/brox/Kconfig
index e6d1f1e..007328f 100644
--- a/src/mainboard/google/brox/Kconfig
+++ b/src/mainboard/google/brox/Kconfig
@@ -47,6 +47,7 @@
select SOC_INTEL_CRASHLOG
select SOC_INTEL_RAPTORLAKE
select SOC_INTEL_ALDERLAKE_PCH_P
+ select SOC_INTEL_COMMON_BLOCK_HDA_VERB
select DRIVERS_INTEL_ISH
select SYSTEM_TYPE_LAPTOP
select TPM_GOOGLE_TI50
diff --git a/src/mainboard/google/brox/Makefile.mk b/src/mainboard/google/brox/Makefile.mk
index 8c7e42d..10f1230 100644
--- a/src/mainboard/google/brox/Makefile.mk
+++ b/src/mainboard/google/brox/Makefile.mk
@@ -10,6 +10,7 @@
ramstage-$(CONFIG_CHROMEOS) += chromeos.c
ramstage-y += mainboard.c
ramstage-y += ec.c
+ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB) += hda_verb.c
BASEBOARD_DIR:=$(call strip_quotes,$(CONFIG_BASEBOARD_DIR))
diff --git a/src/mainboard/google/brox/hda_verb.c b/src/mainboard/google/brox/hda_verb.c
new file mode 100644
index 0000000..39d2d86
--- /dev/null
+++ b/src/mainboard/google/brox/hda_verb.c
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10ec0256, // Codec Vendor / Device ID: Realtek ALC256
+ 0x10ec12ac, // Subsystem ID
+ 0x0000001D, // Number of jacks (NID entries)
+
+ AZALIA_RESET(0x1),
+ /* NID 0x01, HDA Codec Subsystem ID Verb table */
+ AZALIA_SUBVENDOR(0, 0x10ec12ac),
+
+ /* Pin Widget Verb Table */
+
+ /*
+ * DMIC
+ * Requirement is to use PCH DMIC. Hence,
+ * commented out codec's Internal DMIC.
+ * AZALIA_PIN_CFG(0, 0x12, 0x90A60130),
+ * AZALIA_PIN_CFG(0, 0x13, 0x40000000),
+ */
+
+ /* Pin widget 0x14 - Front (Port-D) */
+ AZALIA_PIN_CFG(0, 0x14, 0x90170110),
+ /* Pin widget 0x18 - NPC */
+ AZALIA_PIN_CFG(0, 0x18, 0x411111F0),
+ /* Pin widget 0x19 - MIC2 (Port-F) */
+ AZALIA_PIN_CFG(0, 0x19, 0x04A11040),
+ /* Pin widget 0x1A - LINE1 (Port-C) */
+ AZALIA_PIN_CFG(0, 0x1a, 0x411111F0),
+ /* Pin widget 0x1B - NPC */
+ AZALIA_PIN_CFG(0, 0x1b, 0x411111F0),
+ /* Pin widget 0x1D - BEEP-IN */
+ AZALIA_PIN_CFG(0, 0x1d, 0x40610041),
+ /* Pin widget 0x1E - NPC */
+ AZALIA_PIN_CFG(0, 0x1e, 0x411111F0),
+ /* Pin widget 0x21 - HP1-OUT (Port-I) */
+ AZALIA_PIN_CFG(0, 0x21, 0x04211020),
+ /*
+ * Widget node 0x20 - 1
+ * Codec hidden reset and speaker power 2W/4ohm
+ */
+ 0x0205001A,
+ 0x0204C003,
+ 0x02050038,
+ 0x02047901,
+ /*
+ * Widget node 0x20 - 2
+ * Class D power on Reset
+ */
+ 0x0205003C,
+ 0x02040354,
+ 0x0205003C,
+ 0x02040314,
+ /*
+ * Widget node 0x20 - 3
+ * Disable AGC and set AGC limit to -1.5dB
+ */
+ 0x02050016,
+ 0x02040C50,
+ 0x02050012,
+ 0x0204EBC1,
+ /*
+ * Widget node 0x20 - 4
+ * Set AGC Post gain +1.5dB then Enable AGC
+ */
+ 0x02050013,
+ 0x02044023,
+ 0x02050016,
+ 0x02040E50,
+ /*
+ * Widget node 0x20 - 5
+ * Silence detector enabling + Set EAPD to verb control
+ */
+ 0x02050037,
+ 0x0204FE15,
+ 0x02050010,
+ 0x02040020,
+ /*
+ * Widget node 0x20 - 6
+ * Silence data mode Threshold (-90dB)
+ */
+ 0x02050030,
+ 0x0204A000,
+ 0x0205001B,
+ 0x02040A4B,
+ /*
+ * Widget node 0x20 - 7
+ * Default setting - 1
+ */
+ 0x05750003,
+ 0x05740DA3,
+ 0x02050046,
+ 0x02040004,
+ /*
+ * Widget node 0x20 - 8
+ * support 1 pin detect two port
+ */
+ 0x02050009,
+ 0x0204E003,
+ 0x0205000A,
+ 0x02047770,
+ /*
+ * Widget node 0x20 - 9
+ * To set LDO1/LDO2 as default (used for headset)
+ */
+ 0x02050008,
+ 0x02046A0C,
+ 0x02050008,
+ 0x02046A0C,
+};
+
+const u32 pc_beep_verbs[] = {
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/brox/variants/baseboard/brox/devicetree.cb b/src/mainboard/google/brox/variants/baseboard/brox/devicetree.cb
index 8ea21b0..e1c8134 100644
--- a/src/mainboard/google/brox/variants/baseboard/brox/devicetree.cb
+++ b/src/mainboard/google/brox/variants/baseboard/brox/devicetree.cb
@@ -72,6 +72,9 @@
# HD Audio
register "pch_hda_dsp_enable" = "1"
+ register "pch_hda_sdi_enable[0]" = "1"
+ register "pch_hda_sdi_enable[1]" = "1"
+ register "pch_hda_audio_link_hda_enable" = "1"
register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
register "pch_hda_idisp_codec_enable" = "1"