| /** @file |
| |
| Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> |
| |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, this |
| list of conditions and the following disclaimer in the documentation and/or |
| other materials provided with the distribution. |
| * Neither the name of Intel Corporation nor the names of its contributors may |
| be used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| THE POSSIBILITY OF SUCH DAMAGE. |
| |
| This file is automatically generated. Please do NOT modify !!! |
| |
| **/ |
| |
| #ifndef __FSPTUPD_H__ |
| #define __FSPTUPD_H__ |
| |
| #include <FspUpd.h> |
| |
| #pragma pack(1) |
| |
| |
| /** Fsp T Core UPD |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0020 |
| **/ |
| UINT32 MicrocodeRegionBase; |
| |
| /** Offset 0x0024 |
| **/ |
| UINT32 MicrocodeRegionSize; |
| |
| /** Offset 0x0028 |
| **/ |
| UINT32 CodeRegionBase; |
| |
| /** Offset 0x002C |
| **/ |
| UINT32 CodeRegionSize; |
| |
| /** Offset 0x0030 |
| **/ |
| UINT8 Reserved[16]; |
| } FSPT_CORE_UPD; |
| |
| /** Fsp T Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0040 - PcdSerialIoUartDebugEnable |
| Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. |
| 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing |
| **/ |
| UINT8 PcdSerialIoUartDebugEnable; |
| |
| /** Offset 0x0041 - PcdSerialIoUartNumber - FSPT |
| Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT |
| Core interface, it cannot be used for debug purpose. |
| 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 |
| **/ |
| UINT8 PcdSerialIoUartNumber; |
| |
| /** Offset 0x0042 - PcdSerialIoUart0PinMuxing - FSPT |
| Select SerialIo Uart0 pin muxing. Setting valid only if PcdSerialIoUartNumber is |
| set to UART0. |
| 0:default pins, 1:pins muxed with CNV_BRI/RGI |
| **/ |
| UINT8 PcdSerialIoUart0PinMuxing; |
| |
| /** Offset 0x0043 |
| **/ |
| UINT8 UnusedUpdSpace0; |
| |
| /** Offset 0x0044 |
| **/ |
| UINT32 PcdSerialIoUartInputClock; |
| |
| /** Offset 0x0048 - Pci Express Base Address |
| Base address to be programmed for Pci Express |
| **/ |
| UINT64 PcdPciExpressBaseAddress; |
| |
| /** Offset 0x0050 - Pci Express Region Length |
| Region Length to be programmed for Pci Express |
| **/ |
| UINT32 PcdPciExpressRegionLength; |
| |
| /** Offset 0x0054 |
| **/ |
| UINT8 ReservedFsptUpd1[44]; |
| } FSP_T_CONFIG; |
| |
| /** Fsp T UPD Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0000 |
| **/ |
| FSP_UPD_HEADER FspUpdHeader; |
| |
| /** Offset 0x0020 |
| **/ |
| FSPT_CORE_UPD FsptCoreUpd; |
| |
| /** Offset 0x0040 |
| **/ |
| FSP_T_CONFIG FsptConfig; |
| |
| /** Offset 0x0080 |
| **/ |
| UINT16 UpdTerminator; |
| } FSPT_UPD; |
| |
| #pragma pack() |
| |
| #endif |