commit | 6017abbc2c725aeff2b916fe2d67f868b36f6f9d | [log] [tgz] |
---|---|---|
author | Furquan Shaikh <furquan@google.com> | Tue Oct 27 17:41:09 2020 -0700 |
committer | Patrick Georgi <pgeorgi@google.com> | Mon Nov 02 06:13:54 2020 +0000 |
tree | d632d6a2ef6c315b02d1c52d68116af37fd6035f | |
parent | 2736c82956d4c4969fd896688b8be0d16f3ab272 [diff] |
drivers/wifi/generic: Split wifi_generic_fill_ssdt into two functions This change splits `wifi_generic_fill_ssdt()` into following two functions: 1. `wifi_ssdt_write_device()`: This function writes the device, its address, _UID and _DDN. 2. `wifi_ssdt_write_properties()`: This function writes the properties for WiFi device like _PRW, regulatory domain and SAR. This split is done so that the device write can be skipped for CNVi devices in follow-up CLs. It will allow the SoC controller representation for CNVi PCI device to be consistent with other internal PCI devices in the device tree i.e. not requiring a chip driver for the PCI device. Because of this change, _PRW and SAR will be seen in a separate block in SSDT disassembly, but it does not result in any functional change. Observed difference: Before: Scope (\_SB.PCI0.PBR1) { Device (WF00) { Name (_UID, 0xAA6343DC) Name (_DDN, "WIFI Device") Name (_ADR, 0x0000000000000000) Name (_PRW, Package() { 0x08, 0x03 }) } } After: Device (\_SB.PCI0.PBR1.WF00) { Name (_UID, 0xAA6343DC) Name (_DDN, "WIFI Device") Name (_ADR, 0x0000000000000000) } Scope (\_SB.PCI0.PBR1.WF00) { Name (_PRW, Package() { 0x08, 0x03 }) } Change-Id: I8ab5e4684492ea3b1cf749e5b9e2008e7ec8fa28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAIN
Kconfig option if you're feeling lucky (no support in this case).Optional:
make menuconfig
and make nconfig
)Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.