mb/google/volteer/variant/lindar: Update gpio and devicetree settings
Based on schematic and gpio table of lindar, generate gpio and
overridetree.cb settings for lindar.
BUG=b:161089195
TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com>
Change-Id: Ib869eef08433dab367edd46b3dc577190b6673d8
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
diff --git a/src/mainboard/google/volteer/variants/lindar/overridetree.cb b/src/mainboard/google/volteer/variants/lindar/overridetree.cb
index 32204c5..6f14622 100644
--- a/src/mainboard/google/volteer/variants/lindar/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/lindar/overridetree.cb
@@ -1,6 +1,83 @@
chip soc/intel/tigerlake
+ # USB Port Config
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0
+ register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C1
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera
+ register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C0
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0
+ register "usb3_ports[1]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
+ register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
+
+ register "SaGv" = "SaGv_Disabled"
+ # I2C Port Config
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
device domain 0 on
+ device pci 07.0 off end # TBT_PCIe0 0x9A23
+ device pci 07.1 off end # TBT_PCIe1 0x9A25
+ device pci 07.2 off end # TBT_PCIe2 0x9A27
+ device pci 07.3 off end # TBT_PCIe3 0x9A29
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Headset Codec""
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)"
+ # Set the jd_src to RT5668_JD1 for jack detection
+ register "property_count" = "1"
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ end # I2C0
+ device pci 15.1 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""GDIX0000""
+ register "generic.desc" = ""Goodix Touchscreen""
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "generic.probed" = "1"
+ register "generic.reset_gpio" =
+ "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ # Parameter T3 >= 10ms
+ register "generic.reset_delay_ms" = "120"
+ # Parameter T2 >= 1ms
+ register "generic.reset_off_delay_ms" = "3"
+ register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ # Parameter T1 >= 10ms
+ register "generic.enable_delay_ms" = "12"
+ register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)"
+ # Parameter T4 >= 1ms
+ register "generic.stop_off_delay_ms" = "1"
+ register "generic.has_power_resource" = "1"
+ register "hid_desc_reg_offset" = "0x01"
+ device i2c 14 on end
+ end
+ end # I2C1
+ device pci 15.2 off end # I2C2 0xA0EA
+ device pci 19.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+ register "wake" = "GPE0_DW2_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # I2C5 0xA0C6
end
-
end