libpayload: usb: Refactor USB enumeration to fix SuperSpeed devices
This patch represents a major overhaul of the USB enumeration code in
order to make it cleaner and much more robust to weird or malicious
devices. The main improvement is that it correctly parses the USB
descriptors even if there are unknown descriptors interspersed within,
which is perfectly legal and in particular present on all SuperSpeed
devices (due to the SuperSpeed Endpoint Companion Descriptor).
In addition, it gets rid of the really whacky and special cased
get_descriptor() function, which would read every descriptor twice
whether it made sense or not. The new code makes the callers allocate
descriptor memory and only read stuff twice when it's really necessary
(i.e. the device and configuration descriptors).
Finally, it also moves some more responsibilities into the
controller-specific set_address() function in order to make sure things
are initialized at the same stage for all controllers. In the new model
it initializes the device entry (which zeroes the endpoint array), sets
up endpoint 0 (including MPS), sets the device address and finally
returns the whole usbdev_t structure with that address correctly set.
Note that this should make SuperSpeed devices work, but SuperSpeed hubs
are a wholly different story and would require a custom hub driver
(since the hub descriptor and port status formats are different for USB
3.0 ports, and the whole issue about the same hub showing up as two
different devices on two different ports might present additional
challenges). The stack currently just issues a warning and refuses to
initialize this part of the hub, which means that 3.0 devices connected
through a 3.0 hub may not work correctly.
Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170666
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6780
Tested-by: build bot (Jenkins)
diff --git a/payloads/libpayload/drivers/usb/usb.c b/payloads/libpayload/drivers/usb/usb.c
index 0ec6f5c..4f21e0c 100644
--- a/payloads/libpayload/drivers/usb/usb.c
+++ b/payloads/libpayload/drivers/usb/usb.c
@@ -32,6 +32,8 @@
#include <libpayload-config.h>
#include <usb/usb.h>
+#define DR_DESC gen_bmRequestType(device_to_host, standard_type, dev_recp)
+
hci_t *usb_hcs = 0;
hci_t *
@@ -100,21 +102,27 @@
}
}
-void
+usbdev_t *
init_device_entry (hci_t *controller, int i)
{
+ usbdev_t *dev = calloc(1, sizeof(usbdev_t));
+ if (!dev) {
+ usb_debug("no memory to allocate device structure\n");
+ return NULL;
+ }
if (controller->devices[i] != 0)
usb_debug("warning: device %d reassigned?\n", i);
- controller->devices[i] = malloc(sizeof(usbdev_t));
- controller->devices[i]->controller = controller;
- controller->devices[i]->address = -1;
- controller->devices[i]->hub = -1;
- controller->devices[i]->port = -1;
- controller->devices[i]->init = usb_nop_init;
- controller->devices[i]->init (controller->devices[i]);
+ controller->devices[i] = dev;
+ dev->controller = controller;
+ dev->address = -1;
+ dev->hub = -1;
+ dev->port = -1;
+ dev->init = usb_nop_init;
+ dev->init (controller->devices[i]);
+ return dev;
}
-void
+int
set_feature (usbdev_t *dev, int endp, int feature, int rtype)
{
dev_req_t dr;
@@ -125,10 +133,11 @@
dr.wValue = feature;
dr.wIndex = endp;
dr.wLength = 0;
- dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
+
+ return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
}
-void
+int
get_status (usbdev_t *dev, int intf, int rtype, int len, void *data)
{
dev_req_t dr;
@@ -139,67 +148,37 @@
dr.wValue = 0;
dr.wIndex = intf;
dr.wLength = len;
- dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
+
+ return dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
}
-u8 *
-get_descriptor (usbdev_t *dev, unsigned char bmRequestType, int descType,
- int descIdx, int langID)
+int
+get_descriptor (usbdev_t *dev, int rtype, int descType, int descIdx,
+ void *data, size_t len)
{
- u8 buf[8];
- u8 *result;
dev_req_t dr;
- int size;
- dr.bmRequestType = bmRequestType;
- dr.data_dir = device_to_host; // always like this for descriptors
+ dr.bmRequestType = rtype;
dr.bRequest = GET_DESCRIPTOR;
- dr.wValue = (descType << 8) | descIdx;
- dr.wIndex = langID;
- dr.wLength = 8;
- if (dev->controller->control (dev, IN, sizeof (dr), &dr, 8, buf) < 0) {
- usb_debug ("getting descriptor size (type %x) failed\n",
- descType);
- }
+ dr.wValue = descType << 8 | descIdx;
+ dr.wIndex = 0;
+ dr.wLength = len;
- if (descType == 1) {
- device_descriptor_t *dd = (device_descriptor_t *) buf;
- usb_debug ("maxPacketSize0: %x\n", dd->bMaxPacketSize0);
- if (dd->bMaxPacketSize0 != 0)
- dev->endpoints[0].maxpacketsize = dd->bMaxPacketSize0;
- }
-
- /* special case for configuration descriptors: they carry all their
- subsequent descriptors with them, and keep the entire size at a
- different location */
- size = buf[0];
- if (buf[1] == 2) {
- int realsize = ((unsigned short *) (buf + 2))[0];
- size = realsize;
- }
- result = malloc (size);
- memset (result, 0, size);
- dr.wLength = size;
- if (dev->controller->
- control (dev, IN, sizeof (dr), &dr, size, result) < 0) {
- usb_debug ("getting descriptor (type %x, size %x) failed\n",
- descType, size);
- }
-
- return result;
+ return dev->controller->control (dev, IN, sizeof (dr), &dr, len, data);
}
-void
+int
set_configuration (usbdev_t *dev)
{
dev_req_t dr;
dr.bmRequestType = 0;
dr.bRequest = SET_CONFIGURATION;
- dr.wValue = dev->configuration[5];
+ dr.wValue = dev->configuration->bConfigurationValue;
dr.wIndex = 0;
dr.wLength = 0;
- dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
+
+ return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0);
}
int
@@ -213,18 +192,15 @@
dr.wValue = feature;
dr.wIndex = endp;
dr.wLength = 0;
+
return dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0;
}
int
clear_stall (endpoint_t *ep)
{
- usbdev_t *dev = ep->dev;
- int endp = ep->endpoint;
- int rtype = gen_bmRequestType (host_to_device, standard_type,
- endp ? endp_recp : dev_recp);
-
- int ret = clear_feature (dev, endp, ENDPOINT_HALT, rtype);
+ int ret = clear_feature (ep->dev, ep->endpoint, ENDPOINT_HALT,
+ gen_bmRequestType (host_to_device, standard_type, endp_recp));
ep->toggle = 0;
return ret;
}
@@ -319,7 +295,7 @@
#undef LOG2
}
-int
+usbdev_t *
generic_set_address (hci_t *controller, usb_speed speed,
int hubport, int hubaddr)
{
@@ -335,8 +311,10 @@
dr.wIndex = 0;
dr.wLength = 0;
- init_device_entry(controller, adr);
- usbdev_t *dev = controller->devices[adr];
+ usbdev_t *dev = init_device_entry(controller, adr);
+ if (!dev)
+ return NULL;
+
// dummy values for registering the address
dev->address = 0;
dev->hub = hubaddr;
@@ -347,130 +325,174 @@
dev->endpoints[0].maxpacketsize = 8;
dev->endpoints[0].toggle = 0;
dev->endpoints[0].direction = SETUP;
+ dev->endpoints[0].type = CONTROL;
if (dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) < 0) {
usb_debug ("set_address failed\n");
- return -1;
+ usb_detach_device (controller, adr);
+ return NULL;
}
mdelay (SET_ADDRESS_MDELAY);
- return adr;
+ u8 buf[8];
+ dev->address = adr;
+ if (get_descriptor (dev, DR_DESC, DT_DEV, 0, buf, sizeof(buf))
+ != sizeof(buf)) {
+ usb_debug("first get_descriptor(DT_DEV) failed\n");
+ usb_detach_device (controller, adr);
+ return NULL;
+ }
+ dev->endpoints[0].maxpacketsize = usb_decode_mps0(speed, buf[7]);
+
+ return dev;
}
static int
set_address (hci_t *controller, usb_speed speed, int hubport, int hubaddr)
{
- int adr = controller->set_address(controller, speed, hubport, hubaddr);
- if (adr < 0 || !controller->devices[adr]) {
+ usbdev_t *dev = controller->set_address(controller, speed,
+ hubport, hubaddr);
+ if (!dev) {
usb_debug ("set_address failed\n");
return -1;
}
- configuration_descriptor_t *cd;
- device_descriptor_t *dd;
- usbdev_t *dev = controller->devices[adr];
- dev->address = adr;
- dev->hub = hubaddr;
- dev->port = hubport;
- dev->speed = speed;
- dev->descriptor = get_descriptor (dev, gen_bmRequestType
- (device_to_host, standard_type, dev_recp), 1, 0, 0);
- dd = (device_descriptor_t *) dev->descriptor;
-
- usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x)",
- dd->idVendor, dd->idProduct,
- dd->bcdUSB >> 8, dd->bcdUSB & 0xff);
- dev->quirks = usb_quirk_check(dd->idVendor, dd->idProduct);
-
- usb_debug ("\ndevice has %x configurations\n", dd->bNumConfigurations);
- if (dd->bNumConfigurations == 0) {
- /* device isn't usable */
- usb_debug ("... no usable configuration!\n");
- dev->address = 0;
+ dev->descriptor = malloc(sizeof(*dev->descriptor));
+ if (!dev->descriptor || get_descriptor (dev, DR_DESC, DT_DEV, 0,
+ dev->descriptor, sizeof(*dev->descriptor))
+ != sizeof(*dev->descriptor)) {
+ usb_debug ("get_descriptor(DT_DEV) failed\n");
+ usb_detach_device (controller, dev->address);
return -1;
}
- dev->configuration = get_descriptor (dev, gen_bmRequestType
- (device_to_host, standard_type, dev_recp), 2, 0, 0);
- cd = (configuration_descriptor_t *) dev->configuration;
- interface_descriptor_t *interface =
- (interface_descriptor_t *) (((char *) cd) + cd->bLength);
- {
- int i;
- int num = cd->bNumInterfaces;
- interface_descriptor_t *current = interface;
- usb_debug ("device has %x interfaces\n", num);
- if (num > 1) {
- int interfaces = usb_interface_check(dd->idVendor, dd->idProduct);
- if (interfaces) {
- /* Well known device, don't warn */
- num = interfaces;
- } else {
+ usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x, MPS0: %d)\n",
+ dev->descriptor->idVendor, dev->descriptor->idProduct,
+ dev->descriptor->bcdUSB >> 8, dev->descriptor->bcdUSB & 0xff,
+ dev->endpoints[0].maxpacketsize);
+ dev->quirks = usb_quirk_check(dev->descriptor->idVendor,
+ dev->descriptor->idProduct);
- usb_debug ("\nNOTICE: This driver defaults to using the first interface.\n"
- "This might be the wrong choice and lead to limited functionality\n"
- "of the device. Please report such a case to coreboot@coreboot.org\n"
- "as you might be the first.\n");
- /* we limit to the first interface, as there was no need to
- * implement something else for the time being. If you need
- * it, see the SetInterface and GetInterface functions in
- * the USB specification, and adapt appropriately.
- */
- num = (num > 1) ? 1 : num;
- }
- }
- for (i = 0; i < num; i++) {
- int j;
- usb_debug (" #%x has %x endpoints, interface %x:%x, protocol %x\n",
- current->bInterfaceNumber, current->bNumEndpoints, current->bInterfaceClass, current->bInterfaceSubClass, current->bInterfaceProtocol);
- endpoint_descriptor_t *endp =
- (endpoint_descriptor_t *) (((char *) current)
- + current->bLength);
- /* Skip any non-endpoint descriptor */
- if (endp->bDescriptorType != 0x05)
- endp = (endpoint_descriptor_t *)(((char *)endp) + ((char *)endp)[0]);
-
- memset (dev->endpoints, 0, sizeof (dev->endpoints));
- dev->num_endp = 1; // 0 always exists
- dev->endpoints[0].dev = dev;
- dev->endpoints[0].maxpacketsize = dd->bMaxPacketSize0;
- dev->endpoints[0].direction = SETUP;
- dev->endpoints[0].type = CONTROL;
- dev->endpoints[0].interval = usb_decode_interval(dev->speed, CONTROL, endp->bInterval);
- for (j = 1; j <= current->bNumEndpoints; j++) {
-#ifdef USB_DEBUG
- static const char *transfertypes[4] = {
- "control", "isochronous", "bulk", "interrupt"
- };
- usb_debug (" #%x: Endpoint %x (%s), max packet size %x, type %s\n", j, endp->bEndpointAddress & 0x7f, ((endp->bEndpointAddress & 0x80) != 0) ? "in" : "out", endp->wMaxPacketSize, transfertypes[endp->bmAttributes]);
-#endif
- endpoint_t *ep =
- &dev->endpoints[dev->num_endp++];
- ep->dev = dev;
- ep->endpoint = endp->bEndpointAddress;
- ep->toggle = 0;
- ep->maxpacketsize = endp->wMaxPacketSize;
- ep->direction =
- ((endp->bEndpointAddress & 0x80) ==
- 0) ? OUT : IN;
- ep->type = endp->bmAttributes;
- ep->interval = usb_decode_interval(dev->speed, ep->type, endp->bInterval);
- endp = (endpoint_descriptor_t
- *) (((char *) endp) + endp->bLength);
- }
- current = (interface_descriptor_t *) endp;
- }
+ usb_debug ("device has %d configurations\n",
+ dev->descriptor->bNumConfigurations);
+ if (dev->descriptor->bNumConfigurations == 0) {
+ /* device isn't usable */
+ usb_debug ("... no usable configuration!\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
}
- if (controller->finish_device_config &&
- controller->finish_device_config(dev))
- return adr; /* Device isn't configured correctly,
- only control transfers may work. */
+ u16 buf[2];
+ if (get_descriptor (dev, DR_DESC, DT_CFG, 0, buf, sizeof(buf))
+ != sizeof(buf)) {
+ usb_debug ("first get_descriptor(DT_CFG) failed\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
+ dev->configuration = malloc(buf[1]);
+ if (!dev->configuration) {
+ usb_debug ("could not allocate %d bytes for DT_CFG\n", buf[1]);
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
+ if (get_descriptor (dev, DR_DESC, DT_CFG, 0, dev->configuration,
+ buf[1]) != buf[1]) {
+ usb_debug ("get_descriptor(DT_CFG) failed\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
+ configuration_descriptor_t *cd = dev->configuration;
+ if (cd->wTotalLength != buf[1]) {
+ usb_debug ("configuration descriptor size changed, aborting\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
- set_configuration(dev);
+ /*
+ * If the device is not well known (ifnum == -1), we use the first
+ * interface we encounter, as there was no need to implement something
+ * else for the time being. If you need it, see the SetInterface and
+ * GetInterface functions in the USB specification and set it yourself.
+ */
+ usb_debug ("device has %x interfaces\n", cd->bNumInterfaces);
+ int ifnum = usb_interface_check(dev->descriptor->idVendor,
+ dev->descriptor->idProduct);
+ if (cd->bNumInterfaces > 1 && ifnum < 0)
+ usb_debug ("NOTICE: Your device has multiple interfaces and\n"
+ "this driver will only use the first one. That may\n"
+ "be the wrong choice and cause the device to not\n"
+ "work correctly. Please report this case\n"
+ "(including the above debugging output) to\n"
+ "coreboot@coreboot.org to have the device added to\n"
+ "the list of well-known quirks.\n");
- int class = dd->bDeviceClass;
+ u8 *end = (void *)dev->configuration + cd->wTotalLength;
+ interface_descriptor_t *intf;
+ u8 *ptr;
+
+ /* Find our interface (or the first good one if we don't know) */
+ for (ptr = (void *)dev->configuration + sizeof(*cd); ; ptr += ptr[0]) {
+ if (ptr + 2 > end || !ptr[0] || ptr + ptr[0] > end) {
+ usb_debug ("Couldn't find usable DT_INTF\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
+ if (ptr[1] != DT_INTF)
+ continue;
+ intf = (void *)ptr;
+ if (intf->bLength != sizeof(*intf)) {
+ usb_debug ("Skipping broken DT_INTF\n");
+ continue;
+ }
+ if (ifnum >= 0 && intf->bInterfaceNumber != ifnum)
+ continue;
+ usb_debug ("Interface %d: class 0x%x, sub 0x%x. proto 0x%x\n",
+ intf->bInterfaceNumber, intf->bInterfaceClass,
+ intf->bInterfaceSubClass, intf->bInterfaceProtocol);
+ ptr += sizeof(*intf);
+ break;
+ }
+
+ /* Gather up all endpoints belonging to this inteface */
+ dev->num_endp = 1;
+ for (; ptr + 2 <= end && ptr[0] && ptr + ptr[0] <= end; ptr += ptr[0]) {
+ if (ptr[1] == DT_INTF || ptr[1] == DT_CFG ||
+ dev->num_endp >= ARRAY_SIZE(dev->endpoints))
+ break;
+ if (ptr[1] != DT_ENDP)
+ continue;
+
+ endpoint_descriptor_t *desc = (void *)ptr;
+ static const char *transfertypes[4] = {
+ "control", "isochronous", "bulk", "interrupt"
+ };
+ usb_debug (" #Endpoint %d (%s), max packet size %x, type %s\n",
+ desc->bEndpointAddress & 0x7f,
+ (desc->bEndpointAddress & 0x80) ? "in" : "out",
+ desc->wMaxPacketSize,
+ transfertypes[desc->bmAttributes & 0x3]);
+
+ endpoint_t *ep = &dev->endpoints[dev->num_endp++];
+ ep->dev = dev;
+ ep->endpoint = desc->bEndpointAddress;
+ ep->toggle = 0;
+ ep->maxpacketsize = desc->wMaxPacketSize;
+ ep->direction = (desc->bEndpointAddress & 0x80) ? IN : OUT;
+ ep->type = desc->bmAttributes & 0x3;
+ ep->interval = usb_decode_interval (dev->speed, ep->type,
+ desc->bInterval);
+ }
+
+ if ((controller->finish_device_config &&
+ controller->finish_device_config(dev)) ||
+ set_configuration(dev) < 0) {
+ usb_debug ("Could not finalize device configuration\n");
+ usb_detach_device (controller, dev->address);
+ return -1;
+ }
+
+ int class = dev->descriptor->bDeviceClass;
if (class == 0)
- class = interface->bInterfaceClass;
+ class = intf->bInterfaceClass;
enum {
audio_device = 0x01,
@@ -490,7 +512,7 @@
wireless_device = 0xe0,
misc_device = 0xef,
};
- usb_debug(", class: ");
+ usb_debug("Class: ");
switch (class) {
case audio_device:
usb_debug("audio\n");
@@ -501,8 +523,8 @@
case hid_device:
usb_debug ("HID\n");
#ifdef CONFIG_LP_USB_HID
- controller->devices[adr]->init = usb_hid_init;
- return adr;
+ dev->init = usb_hid_init;
+ return dev->address;
#else
usb_debug ("NOTICE: USB HID support not compiled in\n");
#endif
@@ -519,20 +541,24 @@
case msc_device:
usb_debug ("MSC\n");
#ifdef CONFIG_LP_USB_MSC
- controller->devices[adr]->init = usb_msc_init;
- return adr;
+ dev->init = usb_msc_init;
+ return dev->address;
#else
usb_debug ("NOTICE: USB MSC support not compiled in\n");
#endif
break;
case hub_device:
- usb_debug ("hub\n");
+ if (speed < SUPER_SPEED) {
+ usb_debug ("hub (2.0)\n");
#ifdef CONFIG_LP_USB_HUB
- controller->devices[adr]->init = usb_hub_init;
- return adr;
+ dev->init = usb_hub_init;
+ return dev->address;
#else
- usb_debug ("NOTICE: USB hub support not compiled in.\n");
+ usb_debug ("NOTICE: USB hub support not compiled in\n");
#endif
+ } else {
+ usb_debug ("hub (3.0) - not yet supported!\n");
+ }
break;
case cdc_device:
usb_debug("CDC\n");
@@ -559,8 +585,8 @@
usb_debug("unsupported class %x\n", class);
break;
}
- controller->devices[adr]->init = usb_generic_init;
- return adr;
+ dev->init = usb_generic_init;
+ return dev->address;
}
/*