soc/amd/genoa: rename to genoa_poc
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/soc/amd/genoa_poc/i2c.c b/src/soc/amd/genoa_poc/i2c.c
new file mode 100644
index 0000000..7261a87
--- /dev/null
+++ b/src/soc/amd/genoa_poc/i2c.c
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <amdblocks/i2c.h>
+#include <console/console.h>
+#include <soc/i2c.h>
+#include <soc/southbridge.h>
+#include "chip.h"
+
+/* Table to switch SCL pins to outputs to initially reset the I2C peripherals */
+static const struct soc_i2c_scl_pin i2c_scl_pins[] = {
+ I2C_RESET_SCL_PIN(I2C0_SCL_PIN, GPIO_I2C0_SCL),
+ I2C_RESET_SCL_PIN(I2C1_SCL_PIN, GPIO_I2C1_SCL),
+ I2C_RESET_SCL_PIN(I2C2_SCL_PIN, GPIO_I2C2_SCL),
+ I2C_RESET_SCL_PIN(I2C3_SCL_PIN, GPIO_I2C3_SCL),
+ I2C_RESET_SCL_PIN(I2C4_SCL_PIN, GPIO_I2C4_SCL),
+ I2C_RESET_SCL_PIN(I2C5_SCL_PIN, GPIO_I2C5_SCL),
+};
+
+static const struct soc_i2c_ctrlr_info i2c_ctrlr[I2C_CTRLR_COUNT] = {
+ { I2C_MASTER_MODE, APU_I2C0_BASE, "I2C0" },
+ { I2C_MASTER_MODE, APU_I2C1_BASE, "I2C1" },
+ { I2C_MASTER_MODE, APU_I2C2_BASE, "I2C2" },
+ { I2C_MASTER_MODE, APU_I2C3_BASE, "I2C3" },
+ { I2C_MASTER_MODE, APU_I2C4_BASE, "I2C4" },
+ { I2C_MASTER_MODE, APU_I2C5_BASE, "I2C5" }
+};
+
+void reset_i2c_peripherals(void)
+{
+ const struct soc_amd_genoa_poc_config *cfg = config_of_soc();
+ struct soc_i2c_peripheral_reset_info reset_info;
+
+ reset_info.i2c_scl_reset_mask = cfg->i2c_scl_reset & GPIO_I2C_MASK;
+ reset_info.i2c_scl = i2c_scl_pins;
+ reset_info.num_pins = ARRAY_SIZE(i2c_scl_pins);
+ sb_reset_i2c_peripherals(&reset_info);
+}
+
+void soc_i2c_misc_init(unsigned int bus, const struct dw_i2c_bus_config *cfg)
+{
+ /* TODO: write I2C pad control registers */
+}
+
+const struct soc_i2c_ctrlr_info *soc_get_i2c_ctrlr_info(size_t *num_ctrlrs)
+{
+ *num_ctrlrs = ARRAY_SIZE(i2c_ctrlr);
+ return i2c_ctrlr;
+}
+
+const struct dw_i2c_bus_config *soc_get_i2c_bus_config(size_t *num_buses)
+{
+ const struct soc_amd_genoa_poc_config *config = config_of_soc();
+
+ *num_buses = ARRAY_SIZE(config->i2c);
+ return config->i2c;
+}