tree 4c92322f65ca5e672e3af98f9804d4f9d65d6c91
parent 6ccb252918c8a076dcf0a122e3aac028b4e80d4e
author Patrick Rudolph <patrick.rudolph@9elements.com> 1623439450 +0200
committer Patrick Georgi <pgeorgi@google.com> 1623743255 +0000

treewide: Disable R_AMD64_32S relocation support

This fixes a hard to debug hang that could occur in any stage, but in
the end it follows simple rules and is easy to fix.

In long mode the 32bit displacement addressing used on 'mov' and 'lea'
instructions is sign-extended. Those instructions can be found using
readelf on the stage and searching for relocation type R_X86_64_32S.

The sign extension is no issue when either running in protected mode or
the code module and thus the address is below 2GiB. If the address is
greater than 2GiB, as usually the case for code in TSEG, the higher
address bits [64:32] are all set to 1 and the effective address is
pointing to memory not paged. Accessing this memory will cause a page
fault, which isn't handled either.

To prevent such problems
- disable R_AMD64_32S relocations in rmodtool
- add comment explaining why it's not allowed
- use the pseudo op movabs, which doesn't use 32bit displacement addressing
- Print a useful error message if such a reloc is present in the code

Fixes a crash in TSEG and when in long mode seen on Intel Sandybridge.

Change-Id: Ia5f5a9cde7c325f67b12e3a8e9a76283cc3870a3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>