vc/intel/fsp/mtl: Update header files from 3471_85 to 3471_91
Update header files for FSP for Meteor Lake platform to version 3471_91,
previous version being 3471_85.
FSPM:
1. Address offset changes
BUG=b:327688959
TEST=Able to build and boot google/rex to ChromeOS.
Change-Id: I5a71232018dfefec63b0a83d1e87717e238a4a0a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80782
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h
index d33068e..6172dee 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/FspmUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2023, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2024, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -280,39 +280,39 @@
/** Offset 0x012D - Reserved
**/
- UINT8 Reserved1[3];
+ UINT8 Reserved1[7];
-/** Offset 0x0130 - Tseg Size
+/** Offset 0x0134 - Tseg Size
Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
0x0400000:4MB, 0x01000000:16MB
**/
UINT32 TsegSize;
-/** Offset 0x0134 - MMIO Size
+/** Offset 0x0138 - MMIO Size
Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
**/
UINT16 MmioSize;
-/** Offset 0x0136 - Probeless Trace
+/** Offset 0x013A - Probeless Trace
Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
This also requires IED to be enabled.
$EN_DIS
**/
UINT8 ProbelessTrace;
-/** Offset 0x0137 - Enable SMBus
+/** Offset 0x013B - Enable SMBus
Enable/disable SMBus controller.
$EN_DIS
**/
UINT8 SmbusEnable;
-/** Offset 0x0138 - Spd Address Tabl
+/** Offset 0x013C - Spd Address Tabl
Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
if SPD Address is 00
**/
UINT8 SpdAddressTable[16];
-/** Offset 0x0148 - Platform Debug Consent
+/** Offset 0x014C - Platform Debug Consent
Enabled Trace active: TraceHub is enabled and trace is active, blocks s0ix.\n
\n
Enabled Trace ready: TraceHub is enabled and allowed S0ix.\n
@@ -325,37 +325,37 @@
**/
UINT8 PlatformDebugOption;
-/** Offset 0x0149 - DCI Enable
+/** Offset 0x014D - DCI Enable
Determine if to enable DCI debug from host
$EN_DIS
**/
UINT8 DciEn;
-/** Offset 0x014A - Reserved
+/** Offset 0x014E - Reserved
**/
UINT8 Reserved2;
-/** Offset 0x014B - DCI DbC Mode
+/** Offset 0x014F - DCI DbC Mode
Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
Set both USB2/3DBCEN; No Change: Comply with HW value
0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
**/
UINT8 DciDbcMode;
-/** Offset 0x014C - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
This BIOS option enables kernel and platform debug for USB3 interface over a UFP
Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
0:Disabled, 1:Enabled, 2:No Change
**/
UINT8 DciUsb3TypecUfpDbg;
-/** Offset 0x014D - SOC Trace Hub Mode
+/** Offset 0x0151 - SOC Trace Hub Mode
Enable/Disable SOC TraceHub
$EN_DIS
**/
UINT8 SocTraceHubMode;
-/** Offset 0x014E - SOC Trace Hub Memory Region 0 buffer Size
+/** Offset 0x0152 - SOC Trace Hub Memory Region 0 buffer Size
Select size of memory region 0 buffer. Memory allocated by BIOS only applies to
ITH tool running on the host. For ITH tool running on the target, choose None/OS,
memory shall be allocated by tool. User should be cautious to choose the amount
@@ -366,7 +366,7 @@
**/
UINT16 SocTraceHubMemReg0Size;
-/** Offset 0x0150 - SOC Trace Hub Memory Region 1 buffer Size
+/** Offset 0x0154 - SOC Trace Hub Memory Region 1 buffer Size
Select size of memory region 1 buffer. Memory allocated by BIOS only applies to
ITH tool running on the host. For ITH tool running on the target, choose None/OS,
memory shall be allocated by tool. User should be cautious to choose the amount
@@ -377,17 +377,17 @@
**/
UINT16 SocTraceHubMemReg1Size;
-/** Offset 0x0152 - Reserved
+/** Offset 0x0156 - Reserved
**/
UINT8 Reserved3;
-/** Offset 0x0153 - PCH Trace Hub Mode
+/** Offset 0x0157 - PCH Trace Hub Mode
Enable/Disable PCH TraceHub
$EN_DIS
**/
UINT8 PchTraceHubMode;
-/** Offset 0x0154 - PCH Trace Hub Memory Region 0 buffer Size
+/** Offset 0x0158 - PCH Trace Hub Memory Region 0 buffer Size
Select size of memory region 0 buffer. Memory allocated by BIOS only applies to
ITH tool running on the host. For ITH tool running on the target, choose None/OS,
memory shall be allocated by tool. User should be cautious to choose the amount
@@ -398,7 +398,7 @@
**/
UINT16 PchTraceHubMemReg0Size;
-/** Offset 0x0156 - PCH Trace Hub Memory Region 1 buffer Size
+/** Offset 0x015A - PCH Trace Hub Memory Region 1 buffer Size
Select size of memory region 1 buffer. Memory allocated by BIOS only applies to
ITH tool running on the host. For ITH tool running on the target, choose None/OS,
memory shall be allocated by tool. User should be cautious to choose the amount
@@ -409,54 +409,54 @@
**/
UINT16 PchTraceHubMemReg1Size;
-/** Offset 0x0158 - Reserved
+/** Offset 0x015C - Reserved
**/
UINT8 Reserved4[4];
-/** Offset 0x015C - HD Audio DMIC Link Clock Select
+/** Offset 0x0160 - HD Audio DMIC Link Clock Select
Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB
0: Both, 1: ClkA, 2: ClkB
**/
UINT8 PchHdaAudioLinkDmicClockSelect[2];
-/** Offset 0x015E - State of X2APIC_OPT_OUT bit in the DMAR table
+/** Offset 0x0162 - State of X2APIC_OPT_OUT bit in the DMAR table
0=Disable/Clear, 1=Enable/Set
$EN_DIS
**/
UINT8 X2ApicOptOut;
-/** Offset 0x015F - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+/** Offset 0x0163 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
0=Disable/Clear, 1=Enable/Set
$EN_DIS
**/
UINT8 DmaControlGuarantee;
-/** Offset 0x0160 - Base addresses for VT-d function MMIO access
+/** Offset 0x0164 - Base addresses for VT-d function MMIO access
Base addresses for VT-d MMIO access per VT-d engine
**/
UINT32 VtdBaseAddress[9];
-/** Offset 0x0184 - Disable VT-d
+/** Offset 0x0188 - Disable VT-d
0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
$EN_DIS
**/
UINT8 VtdDisable;
-/** Offset 0x0185 - Vtd Programming for Igd
+/** Offset 0x0189 - Vtd Programming for Igd
1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar
programming disabled)
$EN_DIS
**/
UINT8 VtdIgdEnable;
-/** Offset 0x0186 - Vtd Programming for Iop
+/** Offset 0x018A - Vtd Programming for Iop
1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar
programming disabled)
$EN_DIS
**/
UINT8 VtdIopEnable;
-/** Offset 0x0187 - Internal Graphics Pre-allocated Memory
+/** Offset 0x018B - Internal Graphics Pre-allocated Memory
Size of memory preallocated for internal graphics.
0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB,
0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB,
@@ -464,114 +464,114 @@
**/
UINT8 IgdDvmt50PreAlloc;
-/** Offset 0x0188 - Internal Graphics
+/** Offset 0x018C - Internal Graphics
Enable/disable internal graphics.
$EN_DIS
**/
UINT8 InternalGfx;
-/** Offset 0x0189 - Reserved
+/** Offset 0x018D - Reserved
**/
UINT8 Reserved5;
-/** Offset 0x018A - Board Type
+/** Offset 0x018E - Board Type
MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
Halo, 7=UP Server
0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server
**/
UINT8 UserBd;
-/** Offset 0x018B - Reserved
+/** Offset 0x018F - Reserved
**/
UINT8 Reserved6;
-/** Offset 0x018C - DDR Frequency Limit
+/** Offset 0x0190 - DDR Frequency Limit
Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
2133, 2400, 2667, 2933 and 0 for Auto.
1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
**/
UINT16 DdrFreqLimit;
-/** Offset 0x018E - SAGV
+/** Offset 0x0192 - SAGV
System Agent dynamic frequency support.
0:Disabled, 1:Enabled
**/
UINT8 SaGv;
-/** Offset 0x018F - SAGV WP Mask
+/** Offset 0x0193 - SAGV WP Mask
System Agent dynamic frequency workpoints that memory will be training at the enabled
frequencies.
0x3:Points0_1, 0x7:Points0_1_2, 0xF:AllPoints0_1_2_3
**/
UINT8 SaGvWpMask;
-/** Offset 0x0190 - Memory Test on Warm Boot
+/** Offset 0x0194 - Memory Test on Warm Boot
Run Base Memory Test on Warm Boot
0:Disable, 1:Enable
**/
UINT8 MemTestOnWarmBoot;
-/** Offset 0x0191 - DDR Speed Control
+/** Offset 0x0195 - DDR Speed Control
DDR Frequency and Gear control for all SAGV points.
0:Auto, 1:Manual
**/
UINT8 DdrSpeedControl;
-/** Offset 0x0192 - Controller 0 Channel 0 DIMM Control
+/** Offset 0x0196 - Controller 0 Channel 0 DIMM Control
Enable / Disable DIMMs on Controller 0 Channel 0
$EN_DIS
**/
UINT8 DisableMc0Ch0;
-/** Offset 0x0193 - Controller 0 Channel 1 DIMM Control
+/** Offset 0x0197 - Controller 0 Channel 1 DIMM Control
Enable / Disable DIMMs on Controller 0 Channel 1
$EN_DIS
**/
UINT8 DisableMc0Ch1;
-/** Offset 0x0194 - Controller 0 Channel 2 DIMM Control
+/** Offset 0x0198 - Controller 0 Channel 2 DIMM Control
Enable / Disable DIMMs on Controller 0 Channel 2
$EN_DIS
**/
UINT8 DisableMc0Ch2;
-/** Offset 0x0195 - Controller 0 Channel 3 DIMM Control
+/** Offset 0x0199 - Controller 0 Channel 3 DIMM Control
Enable / Disable DIMMs on Controller 0 Channel 3
$EN_DIS
**/
UINT8 DisableMc0Ch3;
-/** Offset 0x0196 - Controller 1 Channel 0 DIMM Control
+/** Offset 0x019A - Controller 1 Channel 0 DIMM Control
Enable / Disable DIMMs on Controller 1 Channel 0
$EN_DIS
**/
UINT8 DisableMc1Ch0;
-/** Offset 0x0197 - Controller 1 Channel 1 DIMM Control
+/** Offset 0x019B - Controller 1 Channel 1 DIMM Control
Enable / Disable DIMMs on Controller 1 Channel 1
$EN_DIS
**/
UINT8 DisableMc1Ch1;
-/** Offset 0x0198 - Controller 1 Channel 2 DIMM Control
+/** Offset 0x019C - Controller 1 Channel 2 DIMM Control
Enable / Disable DIMMs on Controller 1 Channel 2
$EN_DIS
**/
UINT8 DisableMc1Ch2;
-/** Offset 0x0199 - Controller 1 Channel 3 DIMM Control
+/** Offset 0x019D - Controller 1 Channel 3 DIMM Control
Enable / Disable DIMMs on Controller 1 Channel 3
$EN_DIS
**/
UINT8 DisableMc1Ch3;
-/** Offset 0x019A - Scrambler Support
+/** Offset 0x019E - Scrambler Support
This option enables data scrambling in memory.
$EN_DIS
**/
UINT8 ScramblerSupport;
-/** Offset 0x019B - SPD Profile Selected
+/** Offset 0x019F - SPD Profile Selected
Select DIMM timing profile. Options are 0:Default SPD Profile, 1:Custom Profile,
2:XMP Profile 1, 3:XMP Profile 2, 4:XMP Profile 3, 5:XMP User Profile 4, 6:XMP
User Profile 5
@@ -580,21 +580,21 @@
**/
UINT8 SpdProfileSelected;
-/** Offset 0x019C - Reserved
+/** Offset 0x01A0 - Reserved
**/
UINT8 Reserved7[102];
-/** Offset 0x0202 - Memory Reference Clock
+/** Offset 0x0206 - Memory Reference Clock
100MHz, 133MHz.
0:133MHz, 1:100MHz
**/
UINT8 RefClk;
-/** Offset 0x0203 - Reserved
+/** Offset 0x0207 - Reserved
**/
UINT8 Reserved8[9];
-/** Offset 0x020C - Memory Vdd Voltage
+/** Offset 0x0210 - Memory Vdd Voltage
DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
@@ -602,76 +602,76 @@
**/
UINT16 VddVoltage;
-/** Offset 0x020E - Reserved
+/** Offset 0x0212 - Reserved
**/
UINT8 Reserved9[4];
-/** Offset 0x0212 - Memory Ratio
+/** Offset 0x0216 - Memory Ratio
Automatic or the frequency will equal ratio times reference clock. Set to Auto to
recalculate memory timings listed below.
0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
**/
UINT16 Ratio;
-/** Offset 0x0214 - tCL
+/** Offset 0x0218 - tCL
CAS Latency, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT8 tCL;
-/** Offset 0x0215 - tCWL
+/** Offset 0x0219 - tCWL
Min CAS Write Latency Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT8 tCWL;
-/** Offset 0x0216 - tFAW
+/** Offset 0x021A - tFAW
Min Four Activate Window Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT16 tFAW;
-/** Offset 0x0218 - tRAS
+/** Offset 0x021C - tRAS
RAS Active Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT16 tRAS;
-/** Offset 0x021A - tRCD/tRP
+/** Offset 0x021E - tRCD/tRP
RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 255. Only used
if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
**/
UINT8 tRCDtRP;
-/** Offset 0x021B - Reserved
+/** Offset 0x021F - Reserved
**/
UINT8 Reserved10;
-/** Offset 0x021C - tREFI
+/** Offset 0x0220 - tREFI
Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT16 tREFI;
-/** Offset 0x021E - tRFC
+/** Offset 0x0222 - tRFC
Min Refresh Recovery Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT16 tRFC;
-/** Offset 0x0220 - tRRD
+/** Offset 0x0224 - tRRD
Min Row Active to Row Active Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT8 tRRD;
-/** Offset 0x0221 - tRTP
+/** Offset 0x0225 - tRTP
Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 255. Only used
if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
**/
UINT8 tRTP;
-/** Offset 0x0222 - tWR
+/** Offset 0x0226 - tWR
Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
@@ -679,78 +679,78 @@
**/
UINT8 tWR;
-/** Offset 0x0223 - tWTR
+/** Offset 0x0227 - tWTR
Min Internal Write to Read Command Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected
== 1 (Custom Profile).
**/
UINT8 tWTR;
-/** Offset 0x0224 - Reserved
+/** Offset 0x0228 - Reserved
**/
UINT8 Reserved11[12];
-/** Offset 0x0230 - NMode
+/** Offset 0x0234 - NMode
System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
**/
UINT8 NModeSupport;
-/** Offset 0x0231 - Enable Intel HD Audio (Azalia)
+/** Offset 0x0235 - Enable Intel HD Audio (Azalia)
0: Disable, 1: Enable (Default) Azalia controller
$EN_DIS
**/
UINT8 PchHdaEnable;
-/** Offset 0x0232 - Enable PCH ISH Controller
+/** Offset 0x0236 - Enable PCH ISH Controller
0: Disable, 1: Enable (Default) ISH Controller
$EN_DIS
**/
UINT8 PchIshEnable;
-/** Offset 0x0233 - Reserved
+/** Offset 0x0237 - Reserved
**/
UINT8 Reserved12[7];
-/** Offset 0x023A - SAGV Gear Ratio
+/** Offset 0x023E - SAGV Gear Ratio
Gear Selection for SAGV points. 0 - Auto, 2-Gear 2, 4-Gear 4
**/
UINT8 SaGvGear[4];
-/** Offset 0x023E - SAGV Frequency
+/** Offset 0x0242 - SAGV Frequency
SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300.
**/
UINT16 SaGvFreq[4];
-/** Offset 0x0246 - SAGV Disabled Gear Ratio
+/** Offset 0x024A - SAGV Disabled Gear Ratio
Gear Selection for SAGV Disabled. 0 - Auto, 2-Gear 2, 2-Gear 4
**/
UINT8 GearRatio;
-/** Offset 0x0247 - Reserved
+/** Offset 0x024B - Reserved
**/
UINT8 Reserved13[69];
-/** Offset 0x028C - MMIO size adjustment for AUTO mode
+/** Offset 0x0290 - MMIO size adjustment for AUTO mode
Positive number means increasing MMIO size, Negative value means decreasing MMIO
size: 0 (Default)=no change to AUTO mode MMIO size
**/
UINT16 MmioSizeAdjustment;
-/** Offset 0x028E - Selection of the primary display device
+/** Offset 0x0292 - Selection of the primary display device
0=iGFX, 3(Default)=AUTO, 4=Hybrid Graphics
0:iGFX, 3:AUTO, 4:Hybrid Graphics
**/
UINT8 PrimaryDisplay;
-/** Offset 0x028F - Reserved
+/** Offset 0x0293 - Reserved
**/
UINT8 Reserved14;
-/** Offset 0x0290 - Temporary MMIO address for GMADR
+/** Offset 0x0294 - Temporary MMIO address for GMADR
Obsolete field now and it has been extended to 64 bit address, used LMemBar
**/
UINT32 GmAdr;
-/** Offset 0x0294 - Temporary MMIO address for GTTMMADR
+/** Offset 0x0298 - Temporary MMIO address for GTTMMADR
The reference code will use this as Temporary MMIO address space to access GTTMMADR
Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
@@ -758,186 +758,186 @@
**/
UINT32 GttMmAdr;
-/** Offset 0x0298 - Enable/Disable MRC TXT dependency
+/** Offset 0x029C - Enable/Disable MRC TXT dependency
When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
$EN_DIS
**/
UINT8 TxtImplemented;
-/** Offset 0x0299 - Enable/Disable SA OcSupport
+/** Offset 0x029D - Enable/Disable SA OcSupport
Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
$EN_DIS
**/
UINT8 SaOcSupport;
-/** Offset 0x029A - GT slice Voltage Mode
+/** Offset 0x029E - GT slice Voltage Mode
0(Default): Adaptive, 1: Override
0: Adaptive, 1: Override
**/
UINT8 GtVoltageMode;
-/** Offset 0x029B - Maximum GTs turbo ratio override
+/** Offset 0x029F - Maximum GTs turbo ratio override
0(Default)=Minimal/Auto, 60=Maximum
**/
UINT8 GtMaxOcRatio;
-/** Offset 0x029C - The voltage offset applied to GT slice
+/** Offset 0x02A0 - The voltage offset applied to GT slice
0(Default)=Minimal, 1000=Maximum
**/
UINT16 GtVoltageOffset;
-/** Offset 0x029E - The GT slice voltage override which is applied to the entire range of GT frequencies
+/** Offset 0x02A2 - The GT slice voltage override which is applied to the entire range of GT frequencies
0(Default)=Minimal, 2000=Maximum
**/
UINT16 GtVoltageOverride;
-/** Offset 0x02A0 - adaptive voltage applied during turbo frequencies
+/** Offset 0x02A4 - adaptive voltage applied during turbo frequencies
0(Default)=Minimal, 2000=Maximum
**/
UINT16 GtAdaptiveVoltage;
-/** Offset 0x02A2 - voltage offset applied to the SA
+/** Offset 0x02A6 - voltage offset applied to the SA
0(Default)=Minimal, 1000=Maximum
**/
UINT16 SaVoltageOffset;
-/** Offset 0x02A4 - PCIe root port Function number for Hybrid Graphics dGPU
+/** Offset 0x02A8 - PCIe root port Function number for Hybrid Graphics dGPU
Root port Index number to indicate which PCIe root port has dGPU
**/
UINT8 RootPortIndex;
-/** Offset 0x02A5 - Realtime Memory Timing
+/** Offset 0x02A9 - Realtime Memory Timing
0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
realtime memory timing changes after MRC_DONE.
0: Disabled, 1: Enabled
**/
UINT8 RealtimeMemoryTiming;
-/** Offset 0x02A6 - Reserved
+/** Offset 0x02AA - Reserved
**/
UINT8 Reserved15;
-/** Offset 0x02A7 - Enable/Disable SA IPU
+/** Offset 0x02AB - Enable/Disable SA IPU
Enable(Default): Enable SA IPU, Disable: Disable SA IPU
$EN_DIS
**/
UINT8 SaIpuEnable;
-/** Offset 0x02A8 - IMGU CLKOUT Configuration
+/** Offset 0x02AC - IMGU CLKOUT Configuration
The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
$EN_DIS
**/
UINT8 ImguClkOutEn[6];
-/** Offset 0x02AE - Program GPIOs for LFP on DDI port-A device
+/** Offset 0x02B2 - Program GPIOs for LFP on DDI port-A device
0=Disabled,1(Default)=eDP, 2=MIPI DSI
0:Disabled, 1:eDP, 2:MIPI DSI
**/
UINT8 DdiPortAConfig;
-/** Offset 0x02AF - Program GPIOs for LFP on DDI port-B device
+/** Offset 0x02B3 - Program GPIOs for LFP on DDI port-B device
0(Default)=Disabled,1=eDP, 2=MIPI DSI
0:Disabled, 1:eDP, 2:MIPI DSI
**/
UINT8 DdiPortBConfig;
-/** Offset 0x02B0 - Enable or disable HPD of DDI port A
+/** Offset 0x02B4 - Enable or disable HPD of DDI port A
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPortAHpd;
-/** Offset 0x02B1 - Enable or disable HPD of DDI port B
+/** Offset 0x02B5 - Enable or disable HPD of DDI port B
0=Disable, 1(Default)=Enable
$EN_DIS
**/
UINT8 DdiPortBHpd;
-/** Offset 0x02B2 - Enable or disable HPD of DDI port C
+/** Offset 0x02B6 - Enable or disable HPD of DDI port C
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPortCHpd;
-/** Offset 0x02B3 - Enable or disable HPD of DDI port 1
+/** Offset 0x02B7 - Enable or disable HPD of DDI port 1
0=Disable, 1(Default)=Enable
$EN_DIS
**/
UINT8 DdiPort1Hpd;
-/** Offset 0x02B4 - Enable or disable HPD of DDI port 2
+/** Offset 0x02B8 - Enable or disable HPD of DDI port 2
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort2Hpd;
-/** Offset 0x02B5 - Enable or disable HPD of DDI port 3
+/** Offset 0x02B9 - Enable or disable HPD of DDI port 3
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort3Hpd;
-/** Offset 0x02B6 - Enable or disable HPD of DDI port 4
+/** Offset 0x02BA - Enable or disable HPD of DDI port 4
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort4Hpd;
-/** Offset 0x02B7 - Enable or disable DDC of DDI port A
+/** Offset 0x02BB - Enable or disable DDC of DDI port A
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPortADdc;
-/** Offset 0x02B8 - Enable or disable DDC of DDI port B
+/** Offset 0x02BC - Enable or disable DDC of DDI port B
0=Disable, 1(Default)=Enable
$EN_DIS
**/
UINT8 DdiPortBDdc;
-/** Offset 0x02B9 - Enable or disable DDC of DDI port C
+/** Offset 0x02BD - Enable or disable DDC of DDI port C
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPortCDdc;
-/** Offset 0x02BA - Enable DDC setting of DDI Port 1
+/** Offset 0x02BE - Enable DDC setting of DDI Port 1
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort1Ddc;
-/** Offset 0x02BB - Enable DDC setting of DDI Port 2
+/** Offset 0x02BF - Enable DDC setting of DDI Port 2
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort2Ddc;
-/** Offset 0x02BC - Enable DDC setting of DDI Port 3
+/** Offset 0x02C0 - Enable DDC setting of DDI Port 3
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort3Ddc;
-/** Offset 0x02BD - Enable DDC setting of DDI Port 4
+/** Offset 0x02C1 - Enable DDC setting of DDI Port 4
0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 DdiPort4Ddc;
-/** Offset 0x02BE - GPIO PIN MUX to choose between GPP_SA and GPP_SD Group.
+/** Offset 0x02C2 - GPIO PIN MUX to choose between GPP_SA and GPP_SD Group.
Default will be 0 for each Display PIN Mux which is GPP_SA Group. (0 = SA GROUP,
1 = SD GROUP). BIT0 - EDP VDDEN, BIT1 - EDP BKLTEN, BIT2 - EDP BKLTCTRL, BIT3
- DDI-A, BIT4 - DDI-1/HPD1, BIT5 - DDI-2/HPD2, BIT6 - DDI-3/HPD3, BIT7 - DDI-4/HPD4
**/
UINT8 DisplayGpioPinMux;
-/** Offset 0x02BF - Reserved
+/** Offset 0x02C3 - Reserved
**/
- UINT8 Reserved16[17];
+ UINT8 Reserved16[21];
-/** Offset 0x02D0 - Per-core HT Disable
+/** Offset 0x02D8 - Per-core HT Disable
Defines the per-core HT disable mask where: 1 - Disable selected logical core HT,
0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value
of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have
@@ -945,11 +945,11 @@
**/
UINT16 PerCoreHtDisable;
-/** Offset 0x02D2 - Reserved
+/** Offset 0x02DA - Reserved
**/
UINT8 Reserved17[6];
-/** Offset 0x02D8 - Thermal Velocity Boost Ratio clipping
+/** Offset 0x02E0 - Thermal Velocity Boost Ratio clipping
0: Disabled, 1(Default): Enabled. This service controls Core frequency reduction
caused by high package temperatures for processors that implement the Intel Thermal
Velocity Boost (TVB) feature
@@ -957,32 +957,32 @@
**/
UINT8 TvbRatioClipping;
-/** Offset 0x02D9 - Thermal Velocity Boost voltage optimization
+/** Offset 0x02E1 - Thermal Velocity Boost voltage optimization
0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations
for processors that implement the Intel Thermal Velocity Boost (TVB) feature.
$EN_DIS
**/
UINT8 TvbVoltageOptimization;
-/** Offset 0x02DA - Reserved
+/** Offset 0x02E2 - Reserved
**/
UINT8 Reserved18[45];
-/** Offset 0x0307 - DMI Max Link Speed
+/** Offset 0x030F - DMI Max Link Speed
Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
**/
UINT8 DmiMaxLinkSpeed;
-/** Offset 0x0308 - PCH DMI Equalization Phase 2
+/** Offset 0x0310 - PCH DMI Equalization Phase 2
DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
AUTO - Use the current default method
0:Disable phase2, 1:Enable phase2, 2:Auto
**/
UINT8 PchDmiGen3EqPh2Enable;
-/** Offset 0x0309 - PCH DMI Gen3 Equalization Phase3
+/** Offset 0x0311 - PCH DMI Gen3 Equalization Phase3
DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
@@ -992,60 +992,60 @@
**/
UINT8 PchDmiGen3EqPh3Method;
-/** Offset 0x030A - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+/** Offset 0x0312 - Enable/Disable DMI GEN3 Static EQ Phase1 programming
Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
$EN_DIS
**/
UINT8 DmiGen3ProgramStaticEq;
-/** Offset 0x030B - PCH DMI Gen3 Root port preset values per lane
+/** Offset 0x0313 - PCH DMI Gen3 Root port preset values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-9, 4 is default for each lane
**/
UINT8 PchDmiGen3RootPortPreset[8];
-/** Offset 0x0313 - PCH DMI Gen3 End port preset values per lane
+/** Offset 0x031B - PCH DMI Gen3 End port preset values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
**/
UINT8 PchDmiGen3EndPointPreset[8];
-/** Offset 0x031B - PCH DMI Gen3 End port Hint values per lane
+/** Offset 0x0323 - PCH DMI Gen3 End port Hint values per lane
Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
**/
UINT8 PchDmiGen3EndPointHint[8];
-/** Offset 0x0323 - DMI ASPM Configuration:{Combo
+/** Offset 0x032B - DMI ASPM Configuration:{Combo
Set ASPM Configuration
0:Disabled, 1:L0s, 2:L1, 3:L1L0s
**/
UINT8 DmiAspm;
-/** Offset 0x0324 - Reserved
+/** Offset 0x032C - Reserved
**/
UINT8 Reserved19;
-/** Offset 0x0325 - Enable/Disable DMI GEN3 Hardware Eq
+/** Offset 0x032D - Enable/Disable DMI GEN3 Hardware Eq
Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default):
Enable EQ Phase1 Static Presets Programming
$EN_DIS
**/
UINT8 DmiHweq;
-/** Offset 0x0326 - Enable/Disable DMI GEN3 Phase 23 Bypass
+/** Offset 0x032E - Enable/Disable DMI GEN3 Phase 23 Bypass
DMIGEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1):
Enable Phase 23 Bypass
$EN_DIS
**/
UINT8 Gen3EqPhase23Bypass;
-/** Offset 0x0327 - Enable/Disable DMI GEN3 Phase 3 Bypass
+/** Offset 0x032F - Enable/Disable DMI GEN3 Phase 3 Bypass
DMIGEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1):
Enable Phase 3 Bypass
$EN_DIS
**/
UINT8 Gen3EqPhase3Bypass;
-/** Offset 0x0328 - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable
+/** Offset 0x0330 - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable
Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local
Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter
Coefficient Override
@@ -1053,7 +1053,7 @@
**/
UINT8 Gen3LtcoEnable;
-/** Offset 0x0329 - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable
+/** Offset 0x0331 - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable
Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default):
Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote
Transmitter Coefficient/Preset Override
@@ -1061,271 +1061,271 @@
**/
UINT8 Gen3RtcoRtpoEnable;
-/** Offset 0x032A - DMI Gen3 Transmitter Pre-Cursor Coefficient
+/** Offset 0x0332 - DMI Gen3 Transmitter Pre-Cursor Coefficient
Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10,
2 is default for each lane
**/
UINT8 DmiGen3Ltcpre[8];
-/** Offset 0x0332 - DMI Gen3 Transmitter Post-Cursor Coefficient
+/** Offset 0x033A - DMI Gen3 Transmitter Post-Cursor Coefficient
Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default
for each lane
**/
UINT8 DmiGen3Ltcpo[8];
-/** Offset 0x033A - Reserved
+/** Offset 0x0342 - Reserved
**/
UINT8 Reserved20[34];
-/** Offset 0x035C - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable
+/** Offset 0x0364 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable
Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable,
Manual(0x1): Enable DmiGen3DsPresetEnable
$EN_DIS
**/
UINT8 DmiGen3DsPresetEnable;
-/** Offset 0x035D - DMI Gen3 Root port preset Rx values per lane
+/** Offset 0x0365 - DMI Gen3 Root port preset Rx values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
for each lane
**/
UINT8 DmiGen3DsPortRxPreset[8];
-/** Offset 0x0365 - DMI Gen3 Root port preset Tx values per lane
+/** Offset 0x036D - DMI Gen3 Root port preset Tx values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
for each lane
**/
UINT8 DmiGen3DsPortTxPreset[8];
-/** Offset 0x036D - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable
+/** Offset 0x0375 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable
Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable,
Manual(0x1): Enable DmiGen3UsPresetEnable
$EN_DIS
**/
UINT8 DmiGen3UsPresetEnable;
-/** Offset 0x036E - DMI Gen3 Root port preset Rx values per lane
+/** Offset 0x0376 - DMI Gen3 Root port preset Rx values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
for each lane
**/
UINT8 DmiGen3UsPortRxPreset[8];
-/** Offset 0x0376 - DMI Gen3 Root port preset Tx values per lane
+/** Offset 0x037E - DMI Gen3 Root port preset Tx values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
for each lane
**/
UINT8 DmiGen3UsPortTxPreset[8];
-/** Offset 0x037E - Reserved
+/** Offset 0x0386 - Reserved
**/
UINT8 Reserved21[54];
-/** Offset 0x03B4 - DMI ASPM L1 exit Latency
+/** Offset 0x03BC - DMI ASPM L1 exit Latency
Range: 0-7, 4 is default L1 exit Latency
**/
UINT8 DmiAspmL1ExitLatency;
-/** Offset 0x03B5 - Reserved
+/** Offset 0x03BD - Reserved
**/
UINT8 Reserved22[63];
-/** Offset 0x03F4 - BIST on Reset
+/** Offset 0x03FC - BIST on Reset
Enable/Disable BIST (Built-In Self Test) on reset. <b>0: Disable</b>; 1: Enable.
$EN_DIS
**/
UINT8 BistOnReset;
-/** Offset 0x03F5 - Skip Stop PBET Timer Enable/Disable
+/** Offset 0x03FD - Skip Stop PBET Timer Enable/Disable
Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
$EN_DIS
**/
UINT8 SkipStopPbet;
-/** Offset 0x03F6 - Over clocking support
+/** Offset 0x03FE - Over clocking support
Over clocking support; <b>0: Disable</b>; 1: Enable
$EN_DIS
**/
UINT8 OcSupport;
-/** Offset 0x03F7 - Over clocking Lock
+/** Offset 0x03FF - Over clocking Lock
Lock Overclocking. 0: Disable; <b>1: Enable</b>
$EN_DIS
**/
UINT8 OcLock;
-/** Offset 0x03F8 - Maximum Core Turbo Ratio Override
+/** Offset 0x0400 - Maximum Core Turbo Ratio Override
Maximum core turbo ratio override allows to increase CPU core frequency beyond the
fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 if CoreRatioExtensionMode
is disabled. 0-120 if CoreRatioExtensionMode is enabled.
**/
UINT8 CoreMaxOcRatio;
-/** Offset 0x03F9 - Core voltage mode
+/** Offset 0x0401 - Core voltage mode
Core voltage mode; <b>0: Adaptive</b>; 1: Override.
$EN_DIS
**/
UINT8 CoreVoltageMode;
-/** Offset 0x03FA - Maximum clr turbo ratio override
+/** Offset 0x0402 - Maximum clr turbo ratio override
Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
**/
UINT8 RingMaxOcRatio;
-/** Offset 0x03FB - Hyper Threading Enable/Disable
+/** Offset 0x0403 - Hyper Threading Enable/Disable
Enable or Disable Hyper-Threading Technology. 0: Disable; <b>1: Enable</b>
$EN_DIS
**/
UINT8 HyperThreading;
-/** Offset 0x03FC - Enable or Disable CPU Ratio Override
+/** Offset 0x0404 - Enable or Disable CPU Ratio Override
Enable/Disable CPU Flex Ratio Programming; <b>0: Disable</b>; 1: Enable.
$EN_DIS
**/
UINT8 CpuRatioOverride;
-/** Offset 0x03FD - CPU ratio value
+/** Offset 0x0405 - CPU ratio value
This value must be between Max Efficiency Ratio (LFM) and Maximum non-turbo ratio
set by Hardware (HFM). Valid Range 0 to 63.
**/
UINT8 CpuRatio;
-/** Offset 0x03FE - Reserved
+/** Offset 0x0406 - Reserved
**/
UINT8 Reserved23;
-/** Offset 0x03FF - Number of active big cores
+/** Offset 0x0407 - Number of active big cores
Number of P-cores to enable in each processor package. Note: Number of P-Cores and
E-Cores are looked at together. When both are {0,0
0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores
**/
UINT8 ActiveCoreCount;
-/** Offset 0x0400 - Processor Early Power On Configuration FCLK setting
+/** Offset 0x0408 - Processor Early Power On Configuration FCLK setting
FCLK frequency can take values of 400MHz, 800MHz and 1GHz. <b>0: 800 MHz (ULT/ULX)</b>.
<b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- 2: 400 MHz. - 3: Reserved
0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
**/
UINT8 FClkFrequency;
-/** Offset 0x0401 - Enable or Disable VMX
+/** Offset 0x0409 - Enable or Disable VMX
Enable or Disable VMX, When enabled, a VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology. 0: Disable; <b>1: Enable</b>.
$EN_DIS
**/
UINT8 VmxEnable;
-/** Offset 0x0402 - AVX2 Ratio Offset
+/** Offset 0x040A - AVX2 Ratio Offset
0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
**/
UINT8 Avx2RatioOffset;
-/** Offset 0x0403 - AVX3 Ratio Offset
+/** Offset 0x040B - AVX3 Ratio Offset
DEPRECATED. 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease
AVX ratio vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
**/
UINT8 Avx3RatioOffset;
-/** Offset 0x0404 - BCLK Adaptive Voltage Enable
+/** Offset 0x040C - BCLK Adaptive Voltage Enable
When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
Disable;<b> 1: Enable
$EN_DIS
**/
UINT8 BclkAdaptiveVoltage;
-/** Offset 0x0405 - Reserved
+/** Offset 0x040D - Reserved
**/
UINT8 Reserved24;
-/** Offset 0x0406 - core voltage override
+/** Offset 0x040E - core voltage override
The core voltage override which is applied to the entire range of cpu core frequencies.
Valid Range 0 to 2000
**/
UINT16 CoreVoltageOverride;
-/** Offset 0x0408 - Core Turbo Adaptive Voltage
+/** Offset 0x0410 - Core Turbo Adaptive Voltage
Adaptive voltage applied to the cpu core when the cpu is operating in turbo mode.
Valid Range 0 to 2000
**/
UINT16 CoreAdaptiveVoltage;
-/** Offset 0x040A - Core Turbo voltage Offset
+/** Offset 0x0412 - Core Turbo voltage Offset
The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
**/
UINT16 CoreVoltageOffset;
-/** Offset 0x040C - Core PLL voltage offset
+/** Offset 0x0414 - Core PLL voltage offset
Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
**/
UINT8 CorePllVoltageOffset;
-/** Offset 0x040D - Ring Downbin
+/** Offset 0x0415 - Ring Downbin
Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
lower than the core ratio.0: Disable; <b>1: Enable.</b>
$EN_DIS
**/
UINT8 RingDownBin;
-/** Offset 0x040E - Ring voltage mode
+/** Offset 0x0416 - Ring voltage mode
Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
$EN_DIS
**/
UINT8 RingVoltageMode;
-/** Offset 0x040F - TjMax Offset
+/** Offset 0x0417 - TjMax Offset
TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
**/
UINT8 TjMaxOffset;
-/** Offset 0x0410 - Ring voltage override
+/** Offset 0x0418 - Ring voltage override
The ring voltage override which is applied to the entire range of cpu ring frequencies.
Valid Range 0 to 2000
**/
UINT16 RingVoltageOverride;
-/** Offset 0x0412 - Ring Turbo Adaptive Voltage
+/** Offset 0x041A - Ring Turbo Adaptive Voltage
Adaptive voltage applied to the cpu ring when the cpu is operating in turbo mode.
Valid Range 0 to 2000
**/
UINT16 RingAdaptiveVoltage;
-/** Offset 0x0414 - Ring Turbo voltage Offset
+/** Offset 0x041C - Ring Turbo voltage Offset
The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
**/
UINT16 RingVoltageOffset;
-/** Offset 0x0416 - Enable or Disable TME
+/** Offset 0x041E - Enable or Disable TME
Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks.
<b>0: Disable</b>; 1: Enable.
$EN_DIS
**/
UINT8 TmeEnable;
-/** Offset 0x0417 - Enable CPU CrashLog
+/** Offset 0x041F - Enable CPU CrashLog
Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
$EN_DIS
**/
UINT8 CpuCrashLogEnable;
-/** Offset 0x0418 - CPU Run Control
+/** Offset 0x0420 - CPU Run Control
Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
No Change</b>
0:Disabled, 1:Enabled, 2:No Change
**/
UINT8 DebugInterfaceEnable;
-/** Offset 0x0419 - CPU Run Control Lock
+/** Offset 0x0421 - CPU Run Control Lock
Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
$EN_DIS
**/
UINT8 DebugInterfaceLockEnable;
-/** Offset 0x041A - Reserved
+/** Offset 0x0422 - Reserved
**/
UINT8 Reserved25[67];
-/** Offset 0x045D - Core VF Point Offset Mode
+/** Offset 0x0465 - Core VF Point Offset Mode
Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes.
In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode,
setting a selected VF point; <b>0: Legacy</b>; 1: Selection.
@@ -1333,64 +1333,64 @@
**/
UINT8 CoreVfPointOffsetMode;
-/** Offset 0x045E - Core VF Point Offset
+/** Offset 0x0466 - Core VF Point Offset
Array used to specifies the Core Voltage Offset applied to the each selected VF
Point. This voltage is specified in millivolts.
**/
UINT16 CoreVfPointOffset[15];
-/** Offset 0x047C - Core VF Point Offset Prefix
+/** Offset 0x0484 - Core VF Point Offset Prefix
Sets the CoreVfPointOffset value as positive or negative for corresponding core
VF Point; <b>0: Positive </b>; 1: Negative.
0:Positive, 1:Negative
**/
UINT8 CoreVfPointOffsetPrefix[15];
-/** Offset 0x048B - Core VF Point Ratio
+/** Offset 0x0493 - Core VF Point Ratio
Array for the each selected Core VF Point to display the ration.
**/
UINT8 CoreVfPointRatio[15];
-/** Offset 0x049A - Core VF Point Count
+/** Offset 0x04A2 - Core VF Point Count
Number of supported Core Voltage & Frequency Point Offset
**/
UINT8 CoreVfPointCount;
-/** Offset 0x049B - Reserved
+/** Offset 0x04A3 - Reserved
**/
UINT8 Reserved26[25];
-/** Offset 0x04B4 - Per Core Max Ratio override
+/** Offset 0x04BC - Per Core Max Ratio override
Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new
favored core ratio to each Core. <b>0: Disable</b>, 1: enable
$EN_DIS
**/
UINT8 PerCoreRatioOverride;
-/** Offset 0x04B5 - Reserved
+/** Offset 0x04BD - Reserved
**/
UINT8 Reserved27[41];
-/** Offset 0x04DE - Per Core Current Max Ratio
+/** Offset 0x04E6 - Per Core Current Max Ratio
Array for the Per Core Max Ratio
**/
UINT8 PerCoreRatio[8];
-/** Offset 0x04E6 - Reserved
+/** Offset 0x04EE - Reserved
**/
UINT8 Reserved28[54];
-/** Offset 0x051C - Margin Limit Check
+/** Offset 0x0524 - Margin Limit Check
Margin Limit Check. Choose level of margin check
0:Disable, 1:L1, 2:L2, 3:Both
**/
UINT8 MarginLimitCheck;
-/** Offset 0x051D - Reserved
+/** Offset 0x0525 - Reserved
**/
UINT8 Reserved29[14];
-/** Offset 0x052B - Pvd Ratio Threshold for SOC/CPU die
+/** Offset 0x0533 - Pvd Ratio Threshold for SOC/CPU die
Array of Pvd Ratio Threshold for SOC/CPU die is the threshold value for input ratio
(P0 to Pn) to select the multiplier so that the output is within the DCO frequency
range. As per the die selected, this threshold is applied to SA and MC/CMI PLL
@@ -1399,120 +1399,120 @@
**/
UINT8 PvdRatioThreshold[2];
-/** Offset 0x052D - Reserved
+/** Offset 0x0535 - Reserved
**/
UINT8 Reserved30[68];
-/** Offset 0x0571 - GPIO Override
+/** Offset 0x0579 - GPIO Override
Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings
before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO
configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for use
**/
UINT8 GpioOverride;
-/** Offset 0x0572 - Reserved
+/** Offset 0x057A - Reserved
**/
UINT8 Reserved31[10];
-/** Offset 0x057C - CPU BCLK OC Frequency
+/** Offset 0x0584 - CPU BCLK OC Frequency
CPU BCLK OC Frequency in KHz units. 98000000Hz = 98MHz <b>0 - Auto</b>. Range is
40Mhz-1000Mhz.
**/
UINT32 CpuBclkOcFrequency;
-/** Offset 0x0580 - Reserved
+/** Offset 0x0588 - Reserved
**/
UINT8 Reserved32[4];
-/** Offset 0x0584 - Enable CPU CrashLog GPRs dump
+/** Offset 0x058C - Enable CPU CrashLog GPRs dump
Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only
disable Smm GPRs dump
0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled
**/
UINT8 CrashLogGprs;
-/** Offset 0x0585 - Reserved
+/** Offset 0x058D - Reserved
**/
UINT8 Reserved33[142];
-/** Offset 0x0613 - Acoustic Noise Mitigation feature
+/** Offset 0x061B - Acoustic Noise Mitigation feature
Enabling this option will help mitigate acoustic noise on certain SKUs when the
CPU is in deeper C state. <b>0: Disabled</b>; 1: Enabled
$EN_DIS
**/
UINT8 AcousticNoiseMitigation;
-/** Offset 0x0614 - Reserved
+/** Offset 0x061C - Reserved
**/
UINT8 Reserved34[2];
-/** Offset 0x0616 - Platform Power Pmax
+/** Offset 0x061E - Platform Power Pmax
PSYS PMax power, defined in 1/8 Watt increments. <b>0 - Auto</b> Specified in 1/8
Watt increments. Range 0-1024 Watts(0-8191). Value of 800 = 100W
**/
UINT16 PsysPmax;
-/** Offset 0x0618 - Reserved
+/** Offset 0x0620 - Reserved
**/
UINT8 Reserved35[12];
-/** Offset 0x0624 - AcLoadline
+/** Offset 0x062C - AcLoadline
AC Loadline defined in 1/100 mOhms. A value of 100 = 1.00 mOhm, and 1255 = 12.55
mOhm. Range is 0-6249 (0-62.49 mOhms). 0 = AUTO/HW default. [0] for IA, [1] for
GT, [2] for SA, [3] through [5] are Reserved.
**/
UINT16 AcLoadline[6];
-/** Offset 0x0630 - DcLoadline
+/** Offset 0x0638 - DcLoadline
DC Loadline defined in 1/100 mOhms. A value of 100 = 1.00 mOhm, and 1255 = 12.55
mOhm. Range is 0-6249 (0-62.49 mOhms). 0 = AUTO/HW default. [0] for IA, [1] for
GT, [2] for SA, [3] through [5] are Reserved.
**/
UINT16 DcLoadline[6];
-/** Offset 0x063C - Power State 1 Threshold current
+/** Offset 0x0644 - Power State 1 Threshold current
PS Current Threshold1, defined in 1/4 A increments. A value of 400 = 100A. Range
0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA,
[3] through [5] are Reserved.
**/
UINT16 Psi1Threshold[6];
-/** Offset 0x0648 - Power State 2 Threshold current
+/** Offset 0x0650 - Power State 2 Threshold current
PS Current Threshold2, defined in 1/4 A increments. A value of 400 = 100A. Range
0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA,
[3] through [5] are Reserved.
**/
UINT16 Psi2Threshold[6];
-/** Offset 0x0654 - Power State 3 Threshold current
+/** Offset 0x065C - Power State 3 Threshold current
PS Current Threshold3, defined in 1/4 A increments. A value of 400 = 100A. Range
0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA,
[3] through [5] are Reserved.
**/
UINT16 Psi3Threshold[6];
-/** Offset 0x0660 - Reserved
+/** Offset 0x0668 - Reserved
**/
UINT8 Reserved36[54];
-/** Offset 0x0696 - Thermal Design Current enable/disable
+/** Offset 0x069E - Thermal Design Current enable/disable
Thermal Design Current enable/disable; <b>0: Disable</b>; 1: Enable. [0] for IA,
[1] for GT, [2] for SA, [3] through [5] are Reserved.
**/
UINT8 TdcEnable[6];
-/** Offset 0x069C - Thermal Design Current time window
+/** Offset 0x06A4 - Thermal Design Current time window
TDC Time Window, value of IA either in milliseconds or seconds, value of GT/SA is
in milliseconds. 1ms is default. Range of IA from 1ms to 448s, Range of GT/SA is
1ms to 10ms, except for 9ms. 9ms has no valid encoding in the MSR definition.
**/
UINT32 TdcTimeWindow[6];
-/** Offset 0x06B4 - Reserved
+/** Offset 0x06BC - Reserved
**/
UINT8 Reserved37[128];
-/** Offset 0x0734 - Disable Fast Slew Rate for Deep Package C States for VR domains
+/** Offset 0x073C - Disable Fast Slew Rate for Deep Package C States for VR domains
This option needs to be configured to reduce acoustic noise during deeper C states.
False: Don't disable Fast ramp during deeper C states; True: Disable Fast ramp
during deeper C state. [0] for IA, [1] for GT, [2] for SA, [3] through [5] are
@@ -1521,7 +1521,7 @@
**/
UINT8 FastPkgCRampDisable[6];
-/** Offset 0x073A - Slew Rate configuration for Deep Package C States for VR domains
+/** Offset 0x0742 - Slew Rate configuration for Deep Package C States for VR domains
Set VR IA/GT/SA Slow Slew Rate for Deep Package C State ramp time; Slow slew rate
equals to Fast divided by number, the number is 2, 4, 8, 16 to slow down the slew
rate to help minimize acoustic noise; divide by 16 is disabled for GT/SA. <b>0:
@@ -1530,11 +1530,11 @@
**/
UINT8 SlowSlewRate[6];
-/** Offset 0x0740 - Reserved
+/** Offset 0x0748 - Reserved
**/
UINT8 Reserved38[26];
-/** Offset 0x075A - VR Fast Vmode ICC Limit support
+/** Offset 0x0762 - VR Fast Vmode ICC Limit support
Voltage Regulator Fast Vmode ICC Limit. A value of 400 = 100A. A value of 0 corresponds
to feature disabled (no reactive protection). This value represents the current
threshold where the VR would initiate reactive protection if Fast Vmode is enabled.
@@ -1543,34 +1543,34 @@
**/
UINT16 IccLimit[6];
-/** Offset 0x0766 - Enable/Disable VR FastVmode. The VR will initiate reactive protection if Fast Vmode is enabled.
+/** Offset 0x076E - Enable/Disable VR FastVmode. The VR will initiate reactive protection if Fast Vmode is enabled.
Enable/Disable VR FastVmode; 0: Disable; <b>1: Enable</b>. For all VR by domain
0: Disable, 1: Enable
**/
UINT8 EnableFastVmode[6];
-/** Offset 0x076C - Enable CEP
+/** Offset 0x0774 - Enable CEP
Enable/Disable CEP (Current Excursion Protection) Support. 0: Disable; <b>1: Enable</b>.
[0] for IA, [1] for GT, [2] for SA, [3] through [5] are Reserved.
$EN_DIS
**/
UINT8 CepEnable[6];
-/** Offset 0x0772 - Reserved
+/** Offset 0x077A - Reserved
**/
UINT8 Reserved39[146];
-/** Offset 0x0804 - BiosGuard
+/** Offset 0x080C - BiosGuard
Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
$EN_DIS
**/
UINT8 BiosGuard;
-/** Offset 0x0805
+/** Offset 0x080D
**/
UINT8 BiosGuardToolsInterface;
-/** Offset 0x0806 - Txt
+/** Offset 0x080E - Txt
Enables utilization of additional hardware capabilities provided by Intel (R) Trusted
Execution Technology. Changes require a full power cycle to take effect. <b>0:
Disable</b>, 1: Enable
@@ -1578,1265 +1578,1265 @@
**/
UINT8 Txt;
-/** Offset 0x0807 - Reserved
+/** Offset 0x080F - Reserved
**/
UINT8 Reserved40;
-/** Offset 0x0808 - PrmrrSize
+/** Offset 0x0810 - PrmrrSize
Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
**/
UINT32 PrmrrSize;
-/** Offset 0x080C - SinitMemorySize
+/** Offset 0x0814 - SinitMemorySize
Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
**/
UINT32 SinitMemorySize;
-/** Offset 0x0810 - Reserved
+/** Offset 0x0818 - Reserved
**/
UINT8 Reserved41[8];
-/** Offset 0x0818 - TxtDprMemoryBase
+/** Offset 0x0820 - TxtDprMemoryBase
Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
**/
UINT64 TxtDprMemoryBase;
-/** Offset 0x0820 - TxtHeapMemorySize
+/** Offset 0x0828 - TxtHeapMemorySize
Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
**/
UINT32 TxtHeapMemorySize;
-/** Offset 0x0824 - TxtDprMemorySize
+/** Offset 0x082C - TxtDprMemorySize
Reserve DPR memory size (0-255) MB. 0: Disable, define default value of TxtDprMemorySize
, 1: enable
**/
UINT32 TxtDprMemorySize;
-/** Offset 0x0828 - BiosAcmBase
+/** Offset 0x0830 - BiosAcmBase
Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
**/
UINT32 BiosAcmBase;
-/** Offset 0x082C - BiosAcmSize
+/** Offset 0x0834 - BiosAcmSize
Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
**/
UINT32 BiosAcmSize;
-/** Offset 0x0830 - ApStartupBase
+/** Offset 0x0838 - ApStartupBase
Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
**/
UINT32 ApStartupBase;
-/** Offset 0x0834 - TgaSize
+/** Offset 0x083C - TgaSize
Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
**/
UINT32 TgaSize;
-/** Offset 0x0838 - TxtLcpPdBase
+/** Offset 0x0840 - TxtLcpPdBase
Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
**/
UINT64 TxtLcpPdBase;
-/** Offset 0x0840 - TxtLcpPdSize
+/** Offset 0x0848 - TxtLcpPdSize
Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
**/
UINT64 TxtLcpPdSize;
-/** Offset 0x0848 - IsTPMPresence
+/** Offset 0x0850 - IsTPMPresence
IsTPMPresence default values
**/
UINT8 IsTPMPresence;
-/** Offset 0x0849 - Reserved
+/** Offset 0x0851 - Reserved
**/
UINT8 Reserved42[32];
-/** Offset 0x0869 - Enable PCH HSIO PCIE Rx Set Ctle
+/** Offset 0x0871 - Enable PCH HSIO PCIE Rx Set Ctle
Enable PCH PCIe Gen 3 Set CTLE Value.
**/
UINT8 PchPcieHsioRxSetCtleEnable[28];
-/** Offset 0x0885 - PCH HSIO PCIE Rx Set Ctle Value
+/** Offset 0x088D - PCH HSIO PCIE Rx Set Ctle Value
PCH PCIe Gen 3 Set CTLE Value.
**/
UINT8 PchPcieHsioRxSetCtle[28];
-/** Offset 0x08A1 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
+/** Offset 0x08A9 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28];
-/** Offset 0x08BD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+/** Offset 0x08C5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchPcieHsioTxGen1DownscaleAmp[28];
-/** Offset 0x08D9 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
+/** Offset 0x08E1 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28];
-/** Offset 0x08F5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+/** Offset 0x08FD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchPcieHsioTxGen2DownscaleAmp[28];
-/** Offset 0x0911 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
+/** Offset 0x0919 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28];
-/** Offset 0x092D - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
+/** Offset 0x0935 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchPcieHsioTxGen3DownscaleAmp[28];
-/** Offset 0x0949 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
+/** Offset 0x0951 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen1DeEmphEnable[28];
-/** Offset 0x0965 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
+/** Offset 0x096D - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
**/
UINT8 PchPcieHsioTxGen1DeEmph[28];
-/** Offset 0x0981 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
+/** Offset 0x0989 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28];
-/** Offset 0x099D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
+/** Offset 0x09A5 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
**/
UINT8 PchPcieHsioTxGen2DeEmph3p5[28];
-/** Offset 0x09B9 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
+/** Offset 0x09C1 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28];
-/** Offset 0x09D5 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
+/** Offset 0x09DD - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
**/
UINT8 PchPcieHsioTxGen2DeEmph6p0[28];
-/** Offset 0x09F1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+/** Offset 0x09F9 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
-/** Offset 0x09F9 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+/** Offset 0x0A01 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
**/
UINT8 PchSataHsioRxGen1EqBoostMag[8];
-/** Offset 0x0A01 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+/** Offset 0x0A09 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
-/** Offset 0x0A09 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+/** Offset 0x0A11 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
**/
UINT8 PchSataHsioRxGen2EqBoostMag[8];
-/** Offset 0x0A11 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+/** Offset 0x0A19 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
-/** Offset 0x0A19 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+/** Offset 0x0A21 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
**/
UINT8 PchSataHsioRxGen3EqBoostMag[8];
-/** Offset 0x0A21 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
+/** Offset 0x0A29 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
-/** Offset 0x0A29 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
+/** Offset 0x0A31 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchSataHsioTxGen1DownscaleAmp[8];
-/** Offset 0x0A31 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+/** Offset 0x0A39 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
-/** Offset 0x0A39 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
+/** Offset 0x0A41 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchSataHsioTxGen2DownscaleAmp[8];
-/** Offset 0x0A41 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+/** Offset 0x0A49 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
-/** Offset 0x0A49 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
+/** Offset 0x0A51 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
**/
UINT8 PchSataHsioTxGen3DownscaleAmp[8];
-/** Offset 0x0A51 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
+/** Offset 0x0A59 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen1DeEmphEnable[8];
-/** Offset 0x0A59 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
+/** Offset 0x0A61 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
**/
UINT8 PchSataHsioTxGen1DeEmph[8];
-/** Offset 0x0A61 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+/** Offset 0x0A69 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen2DeEmphEnable[8];
-/** Offset 0x0A69 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
+/** Offset 0x0A71 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
**/
UINT8 PchSataHsioTxGen2DeEmph[8];
-/** Offset 0x0A71 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+/** Offset 0x0A79 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
0: Disable; 1: Enable.
**/
UINT8 PchSataHsioTxGen3DeEmphEnable[8];
-/** Offset 0x0A79 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
+/** Offset 0x0A81 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
**/
UINT8 PchSataHsioTxGen3DeEmph[8];
-/** Offset 0x0A81 - PCH LPC Enhance the port 8xh decoding
+/** Offset 0x0A89 - PCH LPC Enhance the port 8xh decoding
Original LPC only decodes one byte of port 80h.
$EN_DIS
**/
UINT8 PchLpcEnhancePort8xhDecoding;
-/** Offset 0x0A82 - PCH Port80 Route
+/** Offset 0x0A8A - PCH Port80 Route
Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
$EN_DIS
**/
UINT8 PchPort80Route;
-/** Offset 0x0A83 - Enable SMBus ARP support
+/** Offset 0x0A8B - Enable SMBus ARP support
Enable SMBus ARP support.
$EN_DIS
**/
UINT8 SmbusArpEnable;
-/** Offset 0x0A84 - Number of RsvdSmbusAddressTable.
+/** Offset 0x0A8C - Number of RsvdSmbusAddressTable.
The number of elements in the RsvdSmbusAddressTable.
**/
UINT8 PchNumRsvdSmbusAddresses;
-/** Offset 0x0A85 - Reserved
+/** Offset 0x0A8D - Reserved
**/
UINT8 Reserved43;
-/** Offset 0x0A86 - SMBUS Base Address
+/** Offset 0x0A8E - SMBUS Base Address
SMBUS Base Address (IO space).
**/
UINT16 PchSmbusIoBase;
-/** Offset 0x0A88 - Enable SMBus Alert Pin
+/** Offset 0x0A90 - Enable SMBus Alert Pin
Enable SMBus Alert Pin.
$EN_DIS
**/
UINT8 PchSmbAlertEnable;
-/** Offset 0x0A89 - Usage type for SOC/IOE ClkSrc
+/** Offset 0x0A91 - Usage type for SOC/IOE ClkSrc
0-23: PCIe rootport, 0x70:LAN, 0x80: unspecified but in use (free running), 0xFF: not used
**/
UINT8 PcieClkSrcUsage[16];
-/** Offset 0x0A99 - Reserved
+/** Offset 0x0AA1 - Reserved
**/
UINT8 Reserved44[16];
-/** Offset 0x0AA9 - SOC/IOE ClkReq-to-ClkSrc mapping
+/** Offset 0x0AB1 - SOC/IOE ClkReq-to-ClkSrc mapping
Number of ClkReq signal assigned to ClkSrc
**/
UINT8 PcieClkSrcClkReq[16];
-/** Offset 0x0AB9 - Reserved
+/** Offset 0x0AC1 - Reserved
**/
UINT8 Reserved45[55];
-/** Offset 0x0AF0 - Enable PCH PCIE RP Mask
+/** Offset 0x0AF8 - Enable PCH PCIE RP Mask
Enable/disable PCH PCIE Root Ports. 0: disable, 1: enable. One bit for each port,
bit0 for port1, bit1 for port2, and so on.
**/
UINT32 PchPcieRpEnableMask;
-/** Offset 0x0AF4 - Enable SOC/IOE PCIE RP Mask
+/** Offset 0x0AFC - Enable SOC/IOE PCIE RP Mask
Enable/disable SOC/IOE PCIE Root Ports. 0: disable, 1: enable. One bit for each
port, bit0 for port1, bit1 for port2, and so on.
**/
UINT16 PcieRpEnableMask;
-/** Offset 0x0AF6 - VC Type
+/** Offset 0x0AFE - VC Type
Virtual Channel Type Select: 0: VC0, 1: VC1.
0: VC0, 1: VC1
**/
UINT8 PchHdaVcType;
-/** Offset 0x0AF7 - Universal Audio Architecture compliance for DSP enabled system
+/** Offset 0x0AFF - Universal Audio Architecture compliance for DSP enabled system
0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
driver or SST driver supported).
$EN_DIS
**/
UINT8 PchHdaDspUaaCompliance;
-/** Offset 0x0AF8 - Enable HD Audio Link
+/** Offset 0x0B00 - Enable HD Audio Link
Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
$EN_DIS
**/
UINT8 PchHdaAudioLinkHdaEnable;
-/** Offset 0x0AF9 - Enable HDA SDI lanes
+/** Offset 0x0B01 - Enable HDA SDI lanes
Enable/disable HDA SDI lanes.
**/
UINT8 PchHdaSdiEnable[2];
-/** Offset 0x0AFB - HDA Power/Clock Gating (PGD/CGD)
+/** Offset 0x0B03 - HDA Power/Clock Gating (PGD/CGD)
Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1:
FORCE_ENABLE, 2: FORCE_DISABLE.
0: POR, 1: Force Enable, 2: Force Disable
**/
UINT8 PchHdaTestPowerClockGating;
-/** Offset 0x0AFC - Enable HD Audio DMIC_N Link
+/** Offset 0x0B04 - Enable HD Audio DMIC_N Link
Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
**/
UINT8 PchHdaAudioLinkDmicEnable[2];
-/** Offset 0x0AFE - Reserved
+/** Offset 0x0B06 - Reserved
**/
UINT8 Reserved46[2];
-/** Offset 0x0B00 - DMIC<N> ClkA Pin Muxing (N - DMIC number)
+/** Offset 0x0B08 - DMIC<N> ClkA Pin Muxing (N - DMIC number)
Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
**/
UINT32 PchHdaAudioLinkDmicClkAPinMux[2];
-/** Offset 0x0B08 - DMIC<N> ClkB Pin Muxing
+/** Offset 0x0B10 - DMIC<N> ClkB Pin Muxing
Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_*
**/
UINT32 PchHdaAudioLinkDmicClkBPinMux[2];
-/** Offset 0x0B10 - Enable HD Audio DSP
+/** Offset 0x0B18 - Enable HD Audio DSP
Enable/disable HD Audio DSP feature.
$EN_DIS
**/
UINT8 PchHdaDspEnable;
-/** Offset 0x0B11 - Reserved
+/** Offset 0x0B19 - Reserved
**/
UINT8 Reserved47[3];
-/** Offset 0x0B14 - DMIC<N> Data Pin Muxing
+/** Offset 0x0B1C - DMIC<N> Data Pin Muxing
Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
**/
UINT32 PchHdaAudioLinkDmicDataPinMux[2];
-/** Offset 0x0B1C - Enable HD Audio SSP0 Link
+/** Offset 0x0B24 - Enable HD Audio SSP0 Link
Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5
**/
UINT8 PchHdaAudioLinkSspEnable[6];
-/** Offset 0x0B22 - Enable HD Audio SoundWire#N Link
+/** Offset 0x0B2A - Enable HD Audio SoundWire#N Link
Enable/disable HD Audio SNDW#N link. Muxed with HDA.
**/
UINT8 PchHdaAudioLinkSndwEnable[4];
-/** Offset 0x0B26 - iDisp-Link Frequency
+/** Offset 0x0B2E - iDisp-Link Frequency
iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
4: 96MHz, 3: 48MHz
**/
UINT8 PchHdaIDispLinkFrequency;
-/** Offset 0x0B27 - Reserved
+/** Offset 0x0B2F - Reserved
**/
UINT8 Reserved48;
-/** Offset 0x0B28 - iDisp-Link T-mode
+/** Offset 0x0B30 - iDisp-Link T-mode
iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T
0: 2T, 2: 4T, 3: 8T, 4: 16T
**/
UINT8 PchHdaIDispLinkTmode;
-/** Offset 0x0B29 - iDisplay Audio Codec disconnection
+/** Offset 0x0B31 - iDisplay Audio Codec disconnection
0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
$EN_DIS
**/
UINT8 PchHdaIDispCodecDisconnect;
-/** Offset 0x0B2A - Reserved
+/** Offset 0x0B32 - Reserved
**/
UINT8 Reserved49[6];
-/** Offset 0x0B30 - CNVi DDR RFI Mitigation
+/** Offset 0x0B38 - CNVi DDR RFI Mitigation
Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE
$EN_DIS
**/
UINT8 CnviDdrRfim;
-/** Offset 0x0B31 - Reserved
+/** Offset 0x0B39 - Reserved
**/
UINT8 Reserved50[11];
-/** Offset 0x0B3C - Debug Interfaces
+/** Offset 0x0B44 - Debug Interfaces
Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
BIT2 - Not used.
**/
UINT8 PcdDebugInterfaceFlags;
-/** Offset 0x0B3D - Serial Io Uart Debug Controller Number
+/** Offset 0x0B45 - Serial Io Uart Debug Controller Number
Select SerialIo Uart Controller for debug.
0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
**/
UINT8 SerialIoUartDebugControllerNumber;
-/** Offset 0x0B3E - Serial Io Uart Debug Auto Flow
+/** Offset 0x0B46 - Serial Io Uart Debug Auto Flow
Enables UART hardware flow control, CTS and RTS lines.
$EN_DIS
**/
UINT8 SerialIoUartDebugAutoFlow;
-/** Offset 0x0B3F - Reserved
+/** Offset 0x0B47 - Reserved
**/
UINT8 Reserved51;
-/** Offset 0x0B40 - Serial Io Uart Debug BaudRate
+/** Offset 0x0B48 - Serial Io Uart Debug BaudRate
Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
**/
UINT32 SerialIoUartDebugBaudRate;
-/** Offset 0x0B44 - Serial Io Uart Debug Parity
+/** Offset 0x0B4C - Serial Io Uart Debug Parity
Set default Parity.
0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
**/
UINT8 SerialIoUartDebugParity;
-/** Offset 0x0B45 - Serial Io Uart Debug Stop Bits
+/** Offset 0x0B4D - Serial Io Uart Debug Stop Bits
Set default stop bits.
0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
**/
UINT8 SerialIoUartDebugStopBits;
-/** Offset 0x0B46 - Serial Io Uart Debug Data Bits
+/** Offset 0x0B4E - Serial Io Uart Debug Data Bits
Set default word length. 0: Default, 5,6,7,8
5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
**/
UINT8 SerialIoUartDebugDataBits;
-/** Offset 0x0B47 - Reserved
+/** Offset 0x0B4F - Reserved
**/
UINT8 Reserved52;
-/** Offset 0x0B48 - Serial Io Uart Debug Mmio Base
+/** Offset 0x0B50 - Serial Io Uart Debug Mmio Base
Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
= SerialIoUartPci.
**/
UINT32 SerialIoUartDebugMmioBase;
-/** Offset 0x0B4C - ISA Serial Base selection
+/** Offset 0x0B54 - ISA Serial Base selection
Select ISA Serial Base address. Default is 0x3F8.
0:0x3F8, 1:0x2F8
**/
UINT8 PcdIsaSerialUartBase;
-/** Offset 0x0B4D - Reserved
+/** Offset 0x0B55 - Reserved
**/
UINT8 Reserved53;
-/** Offset 0x0B4E - Ring PLL voltage offset
+/** Offset 0x0B56 - Ring PLL voltage offset
Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
**/
UINT8 RingPllVoltageOffset;
-/** Offset 0x0B4F - System Agent PLL voltage offset
+/** Offset 0x0B57 - System Agent PLL voltage offset
Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
**/
UINT8 SaPllVoltageOffset;
-/** Offset 0x0B50 - Reserved
+/** Offset 0x0B58 - Reserved
**/
UINT8 Reserved54;
-/** Offset 0x0B51 - Memory Controller PLL voltage offset
+/** Offset 0x0B59 - Memory Controller PLL voltage offset
Core PLL voltage offset. <b>0: No offset</b>. Range 0-15
**/
UINT8 McPllVoltageOffset;
-/** Offset 0x0B52 - TCSS Thunderbolt PCIE Root Port 0 Enable
+/** Offset 0x0B5A - TCSS Thunderbolt PCIE Root Port 0 Enable
Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssItbtPcie0En;
-/** Offset 0x0B53 - TCSS Thunderbolt PCIE Root Port 1 Enable
+/** Offset 0x0B5B - TCSS Thunderbolt PCIE Root Port 1 Enable
Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssItbtPcie1En;
-/** Offset 0x0B54 - TCSS Thunderbolt PCIE Root Port 2 Enable
+/** Offset 0x0B5C - TCSS Thunderbolt PCIE Root Port 2 Enable
Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssItbtPcie2En;
-/** Offset 0x0B55 - TCSS Thunderbolt PCIE Root Port 3 Enable
+/** Offset 0x0B5D - TCSS Thunderbolt PCIE Root Port 3 Enable
Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssItbtPcie3En;
-/** Offset 0x0B56 - TCSS USB HOST (xHCI) Enable
+/** Offset 0x0B5E - TCSS USB HOST (xHCI) Enable
Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below
$EN_DIS
**/
UINT8 TcssXhciEn;
-/** Offset 0x0B57 - TCSS USB DEVICE (xDCI) Enable
+/** Offset 0x0B5F - TCSS USB DEVICE (xDCI) Enable
Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled
$EN_DIS
**/
UINT8 TcssXdciEn;
-/** Offset 0x0B58 - TCSS DMA0 Enable
+/** Offset 0x0B60 - TCSS DMA0 Enable
Set TCSS DMA0. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssDma0En;
-/** Offset 0x0B59 - TCSS DMA1 Enable
+/** Offset 0x0B61 - TCSS DMA1 Enable
Set TCSS DMA1. 0:Disabled 1:Enabled
$EN_DIS
**/
UINT8 TcssDma1En;
-/** Offset 0x0B5A - PcdSerialDebugBaudRate
+/** Offset 0x0B62 - PcdSerialDebugBaudRate
Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
3:9600, 4:19200, 6:56700, 7:115200
**/
UINT8 PcdSerialDebugBaudRate;
-/** Offset 0x0B5B - HobBufferSize
+/** Offset 0x0B63 - HobBufferSize
Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
total HOB size).
0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
**/
UINT8 HobBufferSize;
-/** Offset 0x0B5C - Early Command Training
+/** Offset 0x0B64 - Early Command Training
Enables/Disable Early Command Training
$EN_DIS
**/
UINT8 ECT;
-/** Offset 0x0B5D - SenseAmp Offset Training
+/** Offset 0x0B65 - SenseAmp Offset Training
Enables/Disable SenseAmp Offset Training
$EN_DIS
**/
UINT8 SOT;
-/** Offset 0x0B5E - Early ReadMPR Timing Centering 2D
+/** Offset 0x0B66 - Early ReadMPR Timing Centering 2D
Enables/Disable Early ReadMPR Timing Centering 2D
$EN_DIS
**/
UINT8 ERDMPRTC2D;
-/** Offset 0x0B5F - Read MPR Training
+/** Offset 0x0B67 - Read MPR Training
Enables/Disable Read MPR Training
$EN_DIS
**/
UINT8 RDMPRT;
-/** Offset 0x0B60 - Receive Enable Training
+/** Offset 0x0B68 - Receive Enable Training
Enables/Disable Receive Enable Training
$EN_DIS
**/
UINT8 RCVET;
-/** Offset 0x0B61 - Jedec Write Leveling
+/** Offset 0x0B69 - Jedec Write Leveling
Enables/Disable Jedec Write Leveling
$EN_DIS
**/
UINT8 JWRL;
-/** Offset 0x0B62 - Early Write Time Centering 2D
+/** Offset 0x0B6A - Early Write Time Centering 2D
Enables/Disable Early Write Time Centering 2D
$EN_DIS
**/
UINT8 EWRTC2D;
-/** Offset 0x0B63 - Early Read Time Centering 2D
+/** Offset 0x0B6B - Early Read Time Centering 2D
Enables/Disable Early Read Time Centering 2D
$EN_DIS
**/
UINT8 ERDTC2D;
-/** Offset 0x0B64 - Reserved
+/** Offset 0x0B6C - Reserved
**/
UINT8 Reserved55;
-/** Offset 0x0B65 - Write Timing Centering 1D
+/** Offset 0x0B6D - Write Timing Centering 1D
Enables/Disable Write Timing Centering 1D
$EN_DIS
**/
UINT8 WRTC1D;
-/** Offset 0x0B66 - Write Voltage Centering 1D
+/** Offset 0x0B6E - Write Voltage Centering 1D
Enables/Disable Write Voltage Centering 1D
$EN_DIS
**/
UINT8 WRVC1D;
-/** Offset 0x0B67 - Read Timing Centering 1D
+/** Offset 0x0B6F - Read Timing Centering 1D
Enables/Disable Read Timing Centering 1D
$EN_DIS
**/
UINT8 RDTC1D;
-/** Offset 0x0B68 - Read Voltage Centering 1D
+/** Offset 0x0B70 - Read Voltage Centering 1D
Enable/Disable Read Voltage Centering 1D
$EN_DIS
**/
UINT8 RDVC1D;
-/** Offset 0x0B69 - Reserved
+/** Offset 0x0B71 - Reserved
**/
UINT8 Reserved56[10];
-/** Offset 0x0B73 - Read Equalization Training
+/** Offset 0x0B7B - Read Equalization Training
Enables/Disable Read Equalization Training
$EN_DIS
**/
UINT8 RDEQT;
-/** Offset 0x0B74 - Reserved
+/** Offset 0x0B7C - Reserved
**/
UINT8 Reserved57[2];
-/** Offset 0x0B76 - Write Timing Centering 2D
+/** Offset 0x0B7E - Write Timing Centering 2D
Enables/Disable Write Timing Centering 2D
$EN_DIS
**/
UINT8 WRTC2D;
-/** Offset 0x0B77 - Read Timing Centering 2D
+/** Offset 0x0B7F - Read Timing Centering 2D
Enables/Disable Read Timing Centering 2D
$EN_DIS
**/
UINT8 RDTC2D;
-/** Offset 0x0B78 - Write Voltage Centering 2D
+/** Offset 0x0B80 - Write Voltage Centering 2D
Enables/Disable Write Voltage Centering 2D
$EN_DIS
**/
UINT8 WRVC2D;
-/** Offset 0x0B79 - Read Voltage Centering 2D
+/** Offset 0x0B81 - Read Voltage Centering 2D
Enables/Disable Read Voltage Centering 2D
$EN_DIS
**/
UINT8 RDVC2D;
-/** Offset 0x0B7A - Reserved
+/** Offset 0x0B82 - Reserved
**/
UINT8 Reserved58;
-/** Offset 0x0B7B - Command Voltage Centering
+/** Offset 0x0B83 - Command Voltage Centering
Enables/Disable Command Voltage Centering
$EN_DIS
**/
UINT8 CMDVC;
-/** Offset 0x0B7C - Late Command Training
+/** Offset 0x0B84 - Late Command Training
Enables/Disable Late Command Training
$EN_DIS
**/
UINT8 LCT;
-/** Offset 0x0B7D - Turn Around Timing Training
+/** Offset 0x0B85 - Turn Around Timing Training
Enables/Disable Turn Around Timing Training
$EN_DIS
**/
UINT8 TAT;
-/** Offset 0x0B7E - Rank Margin Tool
+/** Offset 0x0B86 - Rank Margin Tool
Enable/disable Rank Margin Tool
$EN_DIS
**/
UINT8 RMT;
-/** Offset 0x0B7F - Reserved
+/** Offset 0x0B87 - Reserved
**/
UINT8 Reserved59;
-/** Offset 0x0B80 - DIMM SPD Alias Test
+/** Offset 0x0B88 - DIMM SPD Alias Test
Enables/Disable DIMM SPD Alias Test
$EN_DIS
**/
UINT8 ALIASCHK;
-/** Offset 0x0B81 - Retrain Margin Check
+/** Offset 0x0B89 - Retrain Margin Check
Enables/Disable Retrain Margin Check
$EN_DIS
**/
UINT8 RMC;
-/** Offset 0x0B82 - Row Hammering Prevention
+/** Offset 0x0B8A - Row Hammering Prevention
Enables/Disable Row Hammering Prevention
$EN_DIS
**/
UINT8 ROWHAMMER;
-/** Offset 0x0B83 - Dimm ODT Training
+/** Offset 0x0B8B - Dimm ODT Training
Enables/Disable Dimm ODT Training
$EN_DIS
**/
UINT8 DIMMODTT;
-/** Offset 0x0B84 - DIMM RON Training
+/** Offset 0x0B8C - DIMM RON Training
Enables/Disable DIMM RON Training
$EN_DIS
**/
UINT8 DIMMRONT;
-/** Offset 0x0B85 - TxDqTCO Comp Training
+/** Offset 0x0B8D - TxDqTCO Comp Training
Enable/Disable TxDqTCO Comp Training
$EN_DIS
**/
UINT8 TXTCO;
-/** Offset 0x0B86 - ClkTCO Comp Training
+/** Offset 0x0B8E - ClkTCO Comp Training
Enable/Disable ClkTCO Comp Training
$EN_DIS
**/
UINT8 CLKTCO;
-/** Offset 0x0B87 - CMD Slew Rate Training
+/** Offset 0x0B8F - CMD Slew Rate Training
Enable/Disable CMD Slew Rate Training
$EN_DIS
**/
UINT8 CMDSR;
-/** Offset 0x0B88 - Reserved
+/** Offset 0x0B90 - Reserved
**/
UINT8 Reserved60[2];
-/** Offset 0x0B8A - DIMM CA ODT Training
+/** Offset 0x0B92 - DIMM CA ODT Training
Enable/Disable DIMM CA ODT Training
$EN_DIS
**/
UINT8 DIMMODTCA;
-/** Offset 0x0B8B - Reserved
+/** Offset 0x0B93 - Reserved
**/
UINT8 Reserved61[3];
-/** Offset 0x0B8E - Read Vref Decap Training
+/** Offset 0x0B96 - Read Vref Decap Training
Enable/Disable Read Vref Decap Training
$EN_DIS
**/
UINT8 RDVREFDC;
-/** Offset 0x0B8F - Vddq Training
+/** Offset 0x0B97 - Vddq Training
Enable/Disable Vddq Training
$EN_DIS
**/
UINT8 VDDQT;
-/** Offset 0x0B90 - Rank Margin Tool Per Bit
+/** Offset 0x0B98 - Rank Margin Tool Per Bit
Enable/Disable Rank Margin Tool Per Bit
$EN_DIS
**/
UINT8 RMTBIT;
-/** Offset 0x0B91 - Reserved
+/** Offset 0x0B99 - Reserved
**/
UINT8 Reserved62[4];
-/** Offset 0x0B95 - Duty Cycle Correction Training
+/** Offset 0x0B9D - Duty Cycle Correction Training
Enable/Disable Duty Cycle Correction Training
$EN_DIS
**/
UINT8 DCC;
-/** Offset 0x0B96 - Reserved
+/** Offset 0x0B9E - Reserved
**/
UINT8 Reserved63[17];
-/** Offset 0x0BA7 - ECC Support
+/** Offset 0x0BAF - ECC Support
Enables/Disable ECC Support
$EN_DIS
**/
UINT8 EccSupport;
-/** Offset 0x0BA8 - Ibecc
+/** Offset 0x0BB0 - Ibecc
In-Band ECC Support
$EN_DIS
**/
UINT8 Ibecc;
-/** Offset 0x0BA9 - IbeccParity
+/** Offset 0x0BB1 - IbeccParity
In-Band ECC Parity Control
$EN_DIS
**/
UINT8 IbeccParity;
-/** Offset 0x0BAA - IbeccOperationMode
+/** Offset 0x0BB2 - IbeccOperationMode
In-Band ECC Operation Mode
0:Protect base on address range, 1: Non-protected, 2: All protected
**/
UINT8 IbeccOperationMode;
-/** Offset 0x0BAB - IbeccProtectedRegionEnable
+/** Offset 0x0BB3 - IbeccProtectedRegionEnable
In-Band ECC Protected Region Enable
$EN_DIS
**/
UINT8 IbeccProtectedRegionEnable[8];
-/** Offset 0x0BB3 - Reserved
+/** Offset 0x0BBB - Reserved
**/
UINT8 Reserved64;
-/** Offset 0x0BB4 - IbeccProtectedRegionBases
+/** Offset 0x0BBC - IbeccProtectedRegionBases
IBECC Protected Region Bases per IBECC instance
**/
UINT16 IbeccProtectedRegionBase[8];
-/** Offset 0x0BC4 - IbeccProtectedRegionMasks
+/** Offset 0x0BCC - IbeccProtectedRegionMasks
IBECC Protected Region Masks
**/
UINT16 IbeccProtectedRegionMask[8];
-/** Offset 0x0BD4 - IbeccProtectedRegionOverallBases
+/** Offset 0x0BDC - IbeccProtectedRegionOverallBases
IBECC Protected Region Bases based on enabled IBECC instance
**/
UINT16 IbeccProtectedRegionOverallBase[8];
-/** Offset 0x0BE4 - Memory Remap
+/** Offset 0x0BEC - Memory Remap
Enables/Disable Memory Remap
$EN_DIS
**/
UINT8 RemapEnable;
-/** Offset 0x0BE5 - Rank Interleave support
+/** Offset 0x0BED - Rank Interleave support
Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
the same time.
$EN_DIS
**/
UINT8 RankInterleave;
-/** Offset 0x0BE6 - Enhanced Interleave support
+/** Offset 0x0BEE - Enhanced Interleave support
Enables/Disable Enhanced Interleave support
$EN_DIS
**/
UINT8 EnhancedInterleave;
-/** Offset 0x0BE7 - Ch Hash Support
+/** Offset 0x0BEF - Ch Hash Support
Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
$EN_DIS
**/
UINT8 ChHashEnable;
-/** Offset 0x0BE8 - Extern Therm Status
+/** Offset 0x0BF0 - Extern Therm Status
Enables/Disable Extern Therm Status
$EN_DIS
**/
UINT8 EnableExtts;
-/** Offset 0x0BE9 - DDR PowerDown and idle counter
+/** Offset 0x0BF1 - DDR PowerDown and idle counter
Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
$EN_DIS
**/
UINT8 EnablePwrDn;
-/** Offset 0x0BEA - DDR PowerDown and idle counter
+/** Offset 0x0BF2 - DDR PowerDown and idle counter
Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
$EN_DIS
**/
UINT8 EnablePwrDnLpddr;
-/** Offset 0x0BEB - SelfRefresh Enable
+/** Offset 0x0BF3 - SelfRefresh Enable
Enables/Disable SelfRefresh Enable
$EN_DIS
**/
UINT8 SrefCfgEna;
-/** Offset 0x0BEC - Throttler CKEMin Defeature
+/** Offset 0x0BF4 - Throttler CKEMin Defeature
Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
$EN_DIS
**/
UINT8 ThrtCkeMinDefeatLpddr;
-/** Offset 0x0BED - Throttler CKEMin Defeature
+/** Offset 0x0BF5 - Throttler CKEMin Defeature
Enables/Disable Throttler CKEMin Defeature
$EN_DIS
**/
UINT8 ThrtCkeMinDefeat;
-/** Offset 0x0BEE - Row Hammer Select
+/** Offset 0x0BF6 - Row Hammer Select
Row Hammer Select
0:Disable, 1:RFM, 2:pTRR
**/
UINT8 RhSelect;
-/** Offset 0x0BEF - Exit On Failure (MRC)
+/** Offset 0x0BF7 - Exit On Failure (MRC)
Enables/Disable Exit On Failure (MRC)
$EN_DIS
**/
UINT8 ExitOnFailure;
-/** Offset 0x0BF0 - Reserved
+/** Offset 0x0BF8 - Reserved
**/
UINT8 Reserved65[4];
-/** Offset 0x0BF4 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+/** Offset 0x0BFC - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
$EN_DIS
**/
UINT8 Ddr4DdpSharedZq;
-/** Offset 0x0BF5 - Ch Hash Interleaved Bit
+/** Offset 0x0BFD - Ch Hash Interleaved Bit
Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
**/
UINT8 ChHashInterleaveBit;
-/** Offset 0x0BF6 - Ch Hash Mask
+/** Offset 0x0BFE - Ch Hash Mask
Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
BITS [19:6] Default is 0x30CC
**/
UINT16 ChHashMask;
-/** Offset 0x0BF8 - Base reference clock value
+/** Offset 0x0C00 - Base reference clock value
Base reference clock value, in Hertz(Default is 125Hz)
100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
**/
UINT32 BClkFrequency;
-/** Offset 0x0BFC - EPG DIMM Idd3N
+/** Offset 0x0C04 - EPG DIMM Idd3N
Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
a per DIMM basis. Default is 26
**/
UINT16 Idd3n;
-/** Offset 0x0BFE - EPG DIMM Idd3P
+/** Offset 0x0C06 - EPG DIMM Idd3P
Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
on a per DIMM basis. Default is 11
**/
UINT16 Idd3p;
-/** Offset 0x0C00 - CMD Normalization
+/** Offset 0x0C08 - CMD Normalization
Enable/Disable CMD Normalization
$EN_DIS
**/
UINT8 CMDNORM;
-/** Offset 0x0C01 - Early DQ Write Drive Strength and Equalization Training
+/** Offset 0x0C09 - Early DQ Write Drive Strength and Equalization Training
Enable/Disable Early DQ Write Drive Strength and Equalization Training
$EN_DIS
**/
UINT8 EWRDSEQ;
-/** Offset 0x0C02 - Idle Energy Mc0Ch0Dimm0
+/** Offset 0x0C0A - Idle Energy Mc0Ch0Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc0Ch0Dimm0;
-/** Offset 0x0C03 - Idle Energy Mc0Ch0Dimm1
+/** Offset 0x0C0B - Idle Energy Mc0Ch0Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc0Ch0Dimm1;
-/** Offset 0x0C04 - Idle Energy Mc0Ch1Dimm0
+/** Offset 0x0C0C - Idle Energy Mc0Ch1Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc0Ch1Dimm0;
-/** Offset 0x0C05 - Idle Energy Mc0Ch1Dimm1
+/** Offset 0x0C0D - Idle Energy Mc0Ch1Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc0Ch1Dimm1;
-/** Offset 0x0C06 - Idle Energy Mc1Ch0Dimm0
+/** Offset 0x0C0E - Idle Energy Mc1Ch0Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc1Ch0Dimm0;
-/** Offset 0x0C07 - Idle Energy Mc1Ch0Dimm1
+/** Offset 0x0C0F - Idle Energy Mc1Ch0Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc1Ch0Dimm1;
-/** Offset 0x0C08 - Idle Energy Mc1Ch1Dimm0
+/** Offset 0x0C10 - Idle Energy Mc1Ch1Dimm0
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc1Ch1Dimm0;
-/** Offset 0x0C09 - Idle Energy Mc1Ch1Dimm1
+/** Offset 0x0C11 - Idle Energy Mc1Ch1Dimm1
Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
UINT8 IdleEnergyMc1Ch1Dimm1;
-/** Offset 0x0C0A - PowerDown Energy Mc0Ch0Dimm0
+/** Offset 0x0C12 - PowerDown Energy Mc0Ch0Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc0Ch0Dimm0;
-/** Offset 0x0C0B - PowerDown Energy Mc0Ch0Dimm1
+/** Offset 0x0C13 - PowerDown Energy Mc0Ch0Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc0Ch0Dimm1;
-/** Offset 0x0C0C - PowerDown Energy Mc0Ch1Dimm0
+/** Offset 0x0C14 - PowerDown Energy Mc0Ch1Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc0Ch1Dimm0;
-/** Offset 0x0C0D - PowerDown Energy Mc0Ch1Dimm1
+/** Offset 0x0C15 - PowerDown Energy Mc0Ch1Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc0Ch1Dimm1;
-/** Offset 0x0C0E - PowerDown Energy Mc1Ch0Dimm0
+/** Offset 0x0C16 - PowerDown Energy Mc1Ch0Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc1Ch0Dimm0;
-/** Offset 0x0C0F - PowerDown Energy Mc1Ch0Dimm1
+/** Offset 0x0C17 - PowerDown Energy Mc1Ch0Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc1Ch0Dimm1;
-/** Offset 0x0C10 - PowerDown Energy Mc1Ch1Dimm0
+/** Offset 0x0C18 - PowerDown Energy Mc1Ch1Dimm0
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc1Ch1Dimm0;
-/** Offset 0x0C11 - PowerDown Energy Mc1Ch1Dimm1
+/** Offset 0x0C19 - PowerDown Energy Mc1Ch1Dimm1
PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
**/
UINT8 PdEnergyMc1Ch1Dimm1;
-/** Offset 0x0C12 - Activate Energy Mc0Ch0Dimm0
+/** Offset 0x0C1A - Activate Energy Mc0Ch0Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc0Ch0Dimm0;
-/** Offset 0x0C13 - Activate Energy Mc0Ch0Dimm1
+/** Offset 0x0C1B - Activate Energy Mc0Ch0Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc0Ch0Dimm1;
-/** Offset 0x0C14 - Activate Energy Mc0Ch1Dimm0
+/** Offset 0x0C1C - Activate Energy Mc0Ch1Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc0Ch1Dimm0;
-/** Offset 0x0C15 - Activate Energy Mc0Ch1Dimm1
+/** Offset 0x0C1D - Activate Energy Mc0Ch1Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc0Ch1Dimm1;
-/** Offset 0x0C16 - Activate Energy Mc1Ch0Dimm0
+/** Offset 0x0C1E - Activate Energy Mc1Ch0Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc1Ch0Dimm0;
-/** Offset 0x0C17 - Activate Energy Mc1Ch0Dimm1
+/** Offset 0x0C1F - Activate Energy Mc1Ch0Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc1Ch0Dimm1;
-/** Offset 0x0C18 - Activate Energy Mc1Ch1Dimm0
+/** Offset 0x0C20 - Activate Energy Mc1Ch1Dimm0
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc1Ch1Dimm0;
-/** Offset 0x0C19 - Activate Energy Mc1Ch1Dimm1
+/** Offset 0x0C21 - Activate Energy Mc1Ch1Dimm1
Activate Energy Contribution, range[255;0],(172= Def)
**/
UINT8 ActEnergyMc1Ch1Dimm1;
-/** Offset 0x0C1A - Read Energy Mc0Ch0Dimm0
+/** Offset 0x0C22 - Read Energy Mc0Ch0Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc0Ch0Dimm0;
-/** Offset 0x0C1B - Read Energy Mc0Ch0Dimm1
+/** Offset 0x0C23 - Read Energy Mc0Ch0Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc0Ch0Dimm1;
-/** Offset 0x0C1C - Read Energy Mc0Ch1Dimm0
+/** Offset 0x0C24 - Read Energy Mc0Ch1Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc0Ch1Dimm0;
-/** Offset 0x0C1D - Read Energy Mc0Ch1Dimm1
+/** Offset 0x0C25 - Read Energy Mc0Ch1Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc0Ch1Dimm1;
-/** Offset 0x0C1E - Read Energy Mc1Ch0Dimm0
+/** Offset 0x0C26 - Read Energy Mc1Ch0Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc1Ch0Dimm0;
-/** Offset 0x0C1F - Read Energy Mc1Ch0Dimm1
+/** Offset 0x0C27 - Read Energy Mc1Ch0Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc1Ch0Dimm1;
-/** Offset 0x0C20 - Read Energy Mc1Ch1Dimm0
+/** Offset 0x0C28 - Read Energy Mc1Ch1Dimm0
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc1Ch1Dimm0;
-/** Offset 0x0C21 - Read Energy Mc1Ch1Dimm1
+/** Offset 0x0C29 - Read Energy Mc1Ch1Dimm1
Read Energy Contribution, range[255;0],(212= Def)
**/
UINT8 RdEnergyMc1Ch1Dimm1;
-/** Offset 0x0C22 - Write Energy Mc0Ch0Dimm0
+/** Offset 0x0C2A - Write Energy Mc0Ch0Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc0Ch0Dimm0;
-/** Offset 0x0C23 - Write Energy Mc0Ch0Dimm1
+/** Offset 0x0C2B - Write Energy Mc0Ch0Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc0Ch0Dimm1;
-/** Offset 0x0C24 - Write Energy Mc0Ch1Dimm0
+/** Offset 0x0C2C - Write Energy Mc0Ch1Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc0Ch1Dimm0;
-/** Offset 0x0C25 - Write Energy Mc0Ch1Dimm1
+/** Offset 0x0C2D - Write Energy Mc0Ch1Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc0Ch1Dimm1;
-/** Offset 0x0C26 - Write Energy Mc1Ch0Dimm0
+/** Offset 0x0C2E - Write Energy Mc1Ch0Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc1Ch0Dimm0;
-/** Offset 0x0C27 - Write Energy Mc1Ch0Dimm1
+/** Offset 0x0C2F - Write Energy Mc1Ch0Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc1Ch0Dimm1;
-/** Offset 0x0C28 - Write Energy Mc1Ch1Dimm0
+/** Offset 0x0C30 - Write Energy Mc1Ch1Dimm0
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc1Ch1Dimm0;
-/** Offset 0x0C29 - Write Energy Mc1Ch1Dimm1
+/** Offset 0x0C31 - Write Energy Mc1Ch1Dimm1
Write Energy Contribution, range[255;0],(221= Def)
**/
UINT8 WrEnergyMc1Ch1Dimm1;
-/** Offset 0x0C2A - Throttler CKEMin Timer
+/** Offset 0x0C32 - Throttler CKEMin Timer
Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
Dfault is 0x00
**/
UINT8 ThrtCkeMinTmr;
-/** Offset 0x0C2B - Reserved
+/** Offset 0x0C33 - Reserved
**/
UINT8 Reserved66[2];
-/** Offset 0x0C2D - Rapl Power Floor Ch0
+/** Offset 0x0C35 - Rapl Power Floor Ch0
Power budget ,range[255;0],(0= 5.3W Def)
**/
UINT8 RaplPwrFlCh0;
-/** Offset 0x0C2E - Rapl Power Floor Ch1
+/** Offset 0x0C36 - Rapl Power Floor Ch1
Power budget ,range[255;0],(0= 5.3W Def)
**/
UINT8 RaplPwrFlCh1;
-/** Offset 0x0C2F - Command Rate Support
+/** Offset 0x0C37 - Command Rate Support
CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS
**/
UINT8 EnCmdRate;
-/** Offset 0x0C30 - MC_REFRESH_RATE
+/** Offset 0x0C38 - MC_REFRESH_RATE
Type of Refresh Rate used to prevent Row Hammer. Default is NORMAL Refresh
0:NORMAL Refresh, 1:1x Refresh, 2:2x Refresh, 3:4x Refresh
**/
UINT8 McRefreshRate;
-/** Offset 0x0C31 - Energy Performance Gain
+/** Offset 0x0C39 - Energy Performance Gain
Enable/disable Energy Performance Gain. <b>0: Disable</b>; 1: Enable
$EN_DIS
**/
UINT8 EpgEnable;
-/** Offset 0x0C32 - RH pTRR LFSR0 Mask
+/** Offset 0x0C3A - RH pTRR LFSR0 Mask
Row Hammer pTRR LFSR0 Mask, 1/2^(value)
**/
UINT8 Lfsr0Mask;
-/** Offset 0x0C33 - User Manual Threshold
+/** Offset 0x0C3B - User Manual Threshold
Disabled: Predefined threshold will be used.\n
Enabled: User Input will be used.
$EN_DIS
**/
UINT8 UserThresholdEnable;
-/** Offset 0x0C34 - User Manual Budget
+/** Offset 0x0C3C - User Manual Budget
Disabled: Configuration of memories will defined the Budget value.\n
Enabled: User Input will be used.
$EN_DIS
**/
UINT8 UserBudgetEnable;
-/** Offset 0x0C35 - Reserved
+/** Offset 0x0C3D - Reserved
**/
UINT8 Reserved67;
-/** Offset 0x0C36 - Power Down Mode
+/** Offset 0x0C3E - Power Down Mode
This option controls command bus tristating during idle periods
0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto
**/
UINT8 PowerDownMode;
-/** Offset 0x0C37 - Pwr Down Idle Timer
+/** Offset 0x0C3F - Pwr Down Idle Timer
The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
AUTO: 64 for ULX/ULT, 128 for DT/Halo
**/
UINT8 PwdwnIdleCounter;
-/** Offset 0x0C38 - Page Close Idle Timeout
+/** Offset 0x0C40 - Page Close Idle Timeout
This option controls Page Close Idle Timeout
0:Enabled, 1:Disabled
**/
UINT8 DisPgCloseIdleTimeout;
-/** Offset 0x0C39 - Bitmask of ranks that have CA bus terminated
+/** Offset 0x0C41 - Bitmask of ranks that have CA bus terminated
Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
Rank0 is terminating and Rank1 is non-terminating</b>
**/
UINT8 CmdRanksTerminated;
-/** Offset 0x0C3A - PcdSerialDebugLevel
+/** Offset 0x0C42 - PcdSerialDebugLevel
Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
Info & Verbose.
@@ -2845,76 +2845,76 @@
**/
UINT8 PcdSerialDebugLevel;
-/** Offset 0x0C3B - Reserved
+/** Offset 0x0C43 - Reserved
**/
UINT8 Reserved68[8];
-/** Offset 0x0C43 - Ask MRC to clear memory content
+/** Offset 0x0C4B - Ask MRC to clear memory content
Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
$EN_DIS
**/
UINT8 CleanMemory;
-/** Offset 0x0C44 - TCSS USB Port Enable
+/** Offset 0x0C4C - TCSS USB Port Enable
Bitmap for per port enabling
**/
UINT8 UsbTcPortEnPreMem;
-/** Offset 0x0C45 - Reserved
+/** Offset 0x0C4D - Reserved
**/
UINT8 Reserved69;
-/** Offset 0x0C46 - Post Code Output Port
+/** Offset 0x0C4E - Post Code Output Port
This option configures Post Code Output Port
**/
UINT16 PostCodeOutputPort;
-/** Offset 0x0C48 - RMTLoopCount
+/** Offset 0x0C50 - RMTLoopCount
Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
**/
UINT8 RMTLoopCount;
-/** Offset 0x0C49 - Enable/Disable SA CRID
+/** Offset 0x0C51 - Enable/Disable SA CRID
Enable: SA CRID, Disable (Default): SA CRID
$EN_DIS
**/
UINT8 CridEnable;
-/** Offset 0x0C4A - Reserved
+/** Offset 0x0C52 - Reserved
**/
UINT8 Reserved70[2];
-/** Offset 0x0C4C - BCLK RFI Frequency
+/** Offset 0x0C54 - BCLK RFI Frequency
Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No
RFI Tuning</b>. Range is 98Mhz-100Mhz.
**/
UINT32 BclkRfiFreq[4];
-/** Offset 0x0C5C - Size of PCIe IMR.
+/** Offset 0x0C64 - Size of PCIe IMR.
Size of PCIe IMR in megabytes
**/
UINT16 PcieImrSize;
-/** Offset 0x0C5E - Enable PCIe IMR
+/** Offset 0x0C66 - Enable PCIe IMR
0: Disable(AUTO), 1: Enable
$EN_DIS
**/
UINT8 PcieImrEnabled;
-/** Offset 0x0C5F - Enable PCIe IMR
+/** Offset 0x0C67 - Enable PCIe IMR
1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select
the Root port location from PCH PCIe or SA PCIe
$EN_DIS
**/
UINT8 PcieImrRpLocation;
-/** Offset 0x0C60 - Root port number for IMR.
+/** Offset 0x0C68 - Root port number for IMR.
Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port
from 0 to 23 and if it is SA PCIe then select root port from 0 to 3
**/
UINT8 PcieImrRpSelection;
-/** Offset 0x0C61 - SerialDebugMrcLevel
+/** Offset 0x0C69 - SerialDebugMrcLevel
MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
Info & Verbose.
@@ -2923,289 +2923,289 @@
**/
UINT8 SerialDebugMrcLevel;
-/** Offset 0x0C62 - Reserved
+/** Offset 0x0C6A - Reserved
**/
UINT8 Reserved71[11];
-/** Offset 0x0C6D - RH pTRR LFSR1 Mask
+/** Offset 0x0C75 - RH pTRR LFSR1 Mask
Row Hammer pTRR LFSR1 Mask, 1/2^(value)
**/
UINT8 Lfsr1Mask;
-/** Offset 0x0C6E - Reserved
+/** Offset 0x0C76 - Reserved
**/
UINT8 Reserved72;
-/** Offset 0x0C6F - Command Pins Mapping
+/** Offset 0x0C77 - Command Pins Mapping
BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending.
**/
UINT8 Lp5CccConfig;
-/** Offset 0x0C70 - Command Pins Mirrored
+/** Offset 0x0C78 - Command Pins Mirrored
BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror.
**/
UINT8 CmdMirror;
-/** Offset 0x0C71 - Reserved
+/** Offset 0x0C79 - Reserved
**/
UINT8 Reserved73[3];
-/** Offset 0x0C74 - LowerBasicMemTestSize
+/** Offset 0x0C7C - LowerBasicMemTestSize
Reduce BasicMemoryTest size WA: 0(Default)=Disable, 1=Enable
$EN_DIS
**/
UINT8 LowerBasicMemTestSize;
-/** Offset 0x0C75 - Reserved
+/** Offset 0x0C7D - Reserved
**/
UINT8 Reserved74[20];
-/** Offset 0x0C89 - Skip external display device scanning
+/** Offset 0x0C91 - Skip external display device scanning
Enable: Do not scan for external display device, Disable (Default): Scan external
display devices
$EN_DIS
**/
UINT8 SkipExtGfxScan;
-/** Offset 0x0C8A - Generate BIOS Data ACPI Table
+/** Offset 0x0C92 - Generate BIOS Data ACPI Table
Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
$EN_DIS
**/
UINT8 BdatEnable;
-/** Offset 0x0C8B - Lock PCU Thermal Management registers
+/** Offset 0x0C93 - Lock PCU Thermal Management registers
Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
$EN_DIS
**/
UINT8 LockPTMregs;
-/** Offset 0x0C8C - Panel Power Enable
+/** Offset 0x0C94 - Panel Power Enable
Control for enabling/disabling VDD force bit (Required only for early enabling of
eDP panel). 0=Disable, 1(Default)=Enable
$EN_DIS
**/
UINT8 PanelPowerEnable;
-/** Offset 0x0C8D - BdatTestType
+/** Offset 0x0C95 - BdatTestType
Indicates the type of Memory Training data to populate into the BDAT ACPI table.
0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
**/
UINT8 BdatTestType;
-/** Offset 0x0C8E - Reserved
+/** Offset 0x0C96 - Reserved
**/
UINT8 Reserved75[2];
-/** Offset 0x0C90 - PMR Size
+/** Offset 0x0C98 - PMR Size
Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot
**/
UINT32 DmaBufferSize;
-/** Offset 0x0C94 - The policy for VTd driver behavior
+/** Offset 0x0C9C - The policy for VTd driver behavior
BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS
**/
UINT8 PreBootDmaMask;
-/** Offset 0x0C95 - Reserved
+/** Offset 0x0C9D - Reserved
**/
UINT8 Reserved76[5];
-/** Offset 0x0C9A - Platform LID Status for LFP Displays.
+/** Offset 0x0CA2 - Platform LID Status for LFP Displays.
LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen.
0: LidClosed, 1: LidOpen
**/
UINT8 LidStatus;
-/** Offset 0x0C9B - Control VGA Initialition sequence
+/** Offset 0x0CA3 - Control VGA Initialition sequence
Initialise VGA Init, Set BIT0 - 0 (No VGA Support), BIT0 = 1 (VGA Supported) BIT1
= 1 (VGA Exit)
0x0: NO VGA Init, 0x1: VGA Init, 0x3: VGA Init and VGA Exit
**/
UINT8 VgaInitControl;
-/** Offset 0x0C9C - Graphics Configuration Ptr
+/** Offset 0x0CA4 - Graphics Configuration Ptr
Points to VBT
**/
UINT32 VbtPtr;
-/** Offset 0x0CA0 - Intel Graphics VBT (Video BIOS Table) Size
+/** Offset 0x0CA8 - Intel Graphics VBT (Video BIOS Table) Size
Size of Graphics VBT Image
**/
UINT32 VbtSize;
-/** Offset 0x0CA4 - VGA Training Message Pointer
+/** Offset 0x0CAC - VGA Training Message Pointer
Points to VGA Message Array
**/
UINT32 VgaMessage;
-/** Offset 0x0CA8 - Reserved
+/** Offset 0x0CB0 - Reserved
**/
UINT8 Reserved77[124];
-/** Offset 0x0D24 - TotalFlashSize
+/** Offset 0x0D2C - TotalFlashSize
Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
**/
UINT16 TotalFlashSize;
-/** Offset 0x0D26 - BiosSize
+/** Offset 0x0D2E - BiosSize
The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard !=
0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected
Range) so that a BIOS Update Script can be stored in the DPR.
**/
UINT16 BiosSize;
-/** Offset 0x0D28 - Reserved
+/** Offset 0x0D30 - Reserved
**/
UINT8 Reserved78[28];
-/** Offset 0x0D44 - Smbus dynamic power gating
+/** Offset 0x0D4C - Smbus dynamic power gating
Disable or Enable Smbus dynamic power gating.
$EN_DIS
**/
UINT8 SmbusDynamicPowerGating;
-/** Offset 0x0D45 - Disable and Lock Watch Dog Register
+/** Offset 0x0D4D - Disable and Lock Watch Dog Register
Set 1 to clear WDT status, then disable and lock WDT registers.
$EN_DIS
**/
UINT8 WdtDisableAndLock;
-/** Offset 0x0D46 - Reserved
+/** Offset 0x0D4E - Reserved
**/
UINT8 Reserved79[2];
-/** Offset 0x0D48 - SMBUS SPD Write Disable
+/** Offset 0x0D50 - SMBUS SPD Write Disable
Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
Disable bit. For security recommendations, SPD write disable bit must be set.
$EN_DIS
**/
UINT8 SmbusSpdWriteDisable;
-/** Offset 0x0D49 - Reserved
+/** Offset 0x0D51 - Reserved
**/
UINT8 Reserved80[34];
-/** Offset 0x0D6B - HECI Timeouts
+/** Offset 0x0D73 - HECI Timeouts
0: Disable, 1: Enable (Default) timeout check for HECI
$EN_DIS
**/
UINT8 HeciTimeouts;
-/** Offset 0x0D6C - Force ME DID Init Status
+/** Offset 0x0D74 - Force ME DID Init Status
Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
ME DID init stat value
$EN_DIS
**/
UINT8 DidInitStat;
-/** Offset 0x0D6D - CPU Replaced Polling Disable
+/** Offset 0x0D75 - CPU Replaced Polling Disable
Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
$EN_DIS
**/
UINT8 DisableCpuReplacedPolling;
-/** Offset 0x0D6E - Check HECI message before send
+/** Offset 0x0D76 - Check HECI message before send
Test, 0: disable, 1: enable, Enable/Disable message check.
$EN_DIS
**/
UINT8 DisableMessageCheck;
-/** Offset 0x0D6F - Skip MBP HOB
+/** Offset 0x0D77 - Skip MBP HOB
Test, 0: disable, 1: enable, Enable/Disable sending MBP message and creating MBP Hob.
$EN_DIS
**/
UINT8 SkipMbpHob;
-/** Offset 0x0D70 - HECI2 Interface Communication
+/** Offset 0x0D78 - HECI2 Interface Communication
Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
$EN_DIS
**/
UINT8 HeciCommunication2;
-/** Offset 0x0D71 - Enable KT device
+/** Offset 0x0D79 - Enable KT device
Test, 0: POR, 1: enable, 2: disable, Enable or Disable KT device.
$EN_DIS
**/
UINT8 KtDeviceEnable;
-/** Offset 0x0D72 - Skip CPU replacement check
+/** Offset 0x0D7A - Skip CPU replacement check
Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
$EN_DIS
**/
UINT8 SkipCpuReplacementCheck;
-/** Offset 0x0D73 - Reserved
+/** Offset 0x0D7B - Reserved
**/
UINT8 Reserved81[100];
-/** Offset 0x0DD7 - Avx2 Voltage Guardband Scaling Factor
+/** Offset 0x0DDF - Avx2 Voltage Guardband Scaling Factor
AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
1/100 units, where a value of 125 would apply a 1.25 scale factor.
**/
UINT8 Avx2VoltageScaleFactor;
-/** Offset 0x0DD8 - Avx512 Voltage Guardband Scaling Factor
+/** Offset 0x0DE0 - Avx512 Voltage Guardband Scaling Factor
DEPRECATED. AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range
is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
**/
UINT8 Avx512VoltageScaleFactor;
-/** Offset 0x0DD9 - Serial Io Uart Debug Mode
+/** Offset 0x0DE1 - Serial Io Uart Debug Mode
Select SerialIo Uart Controller mode
0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
4:SerialIoUartSkipInit
**/
UINT8 SerialIoUartDebugMode;
-/** Offset 0x0DDA - Reserved
+/** Offset 0x0DE2 - Reserved
**/
UINT8 Reserved82[2];
-/** Offset 0x0DDC - SerialIoUartDebugRxPinMux - FSPM
+/** Offset 0x0DE4 - SerialIoUartDebugRxPinMux - FSPM
Select RX pin muxing for SerialIo UART used for debug
**/
UINT32 SerialIoUartDebugRxPinMux;
-/** Offset 0x0DE0 - SerialIoUartDebugTxPinMux - FSPM
+/** Offset 0x0DE8 - SerialIoUartDebugTxPinMux - FSPM
Select TX pin muxing for SerialIo UART used for debug
**/
UINT32 SerialIoUartDebugTxPinMux;
-/** Offset 0x0DE4 - SerialIoUartDebugRtsPinMux - FSPM
+/** Offset 0x0DEC - SerialIoUartDebugRtsPinMux - FSPM
Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
for possible values.
**/
UINT32 SerialIoUartDebugRtsPinMux;
-/** Offset 0x0DE8 - SerialIoUartDebugCtsPinMux - FSPM
+/** Offset 0x0DF0 - SerialIoUartDebugCtsPinMux - FSPM
Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
for possible values.
**/
UINT32 SerialIoUartDebugCtsPinMux;
-/** Offset 0x0DEC - Reserved
+/** Offset 0x0DF4 - Reserved
**/
UINT8 Reserved83[164];
-/** Offset 0x0E90 - TME Exclude Base Address
+/** Offset 0x0E98 - TME Exclude Base Address
TME Exclude Base Address.
**/
UINT64 TmeExcludeBase;
-/** Offset 0x0E98 - TME Exclude Size Value
+/** Offset 0x0EA0 - TME Exclude Size Value
TME Exclude Size Value.
**/
UINT64 TmeExcludeSize;
-/** Offset 0x0EA0 - Generate New TME Key
+/** Offset 0x0EA8 - Generate New TME Key
Enable: Generate New TME Key, Disable(Default): TME key determine by type of reset
$EN_DIS
**/
UINT8 GenerateNewTmeKey;
-/** Offset 0x0EA1 - Reserved
+/** Offset 0x0EA9 - Reserved
**/
UINT8 Reserved84[23];
} FSP_M_CONFIG;
@@ -3226,11 +3226,11 @@
**/
FSP_M_CONFIG FspmConfig;
-/** Offset 0x0EB8
+/** Offset 0x0EC0
**/
UINT8 Rsvd500[6];
-/** Offset 0x0EBE
+/** Offset 0x0EC6
**/
UINT16 UpdTerminator;
} FSPM_UPD;