Remove failover/fallback/normal handling in mainboards'
romstage.c. That's newconfig stuff.
1. In failover_process(), I removed the fallback/normal selection logic
and kept the remaining hardware init in. The if-clauses' conditions are
reverted to match.
Remove #if failover||fallback guard.
2. Change cache_as_ram_main() to first call failover_process, then
real_main unconditionally.
3. Move failover_process's code to the beginning of real_main, remove
failover_process and its call in cache_as_ram_main.
4. Remove cache_as_ram_main, rename real_main to cache_as_ram_main (same
arguments, so no problem with that)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
index 69e06bc..49800a5 100644
--- a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
+++ b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c
@@ -152,9 +152,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
-
-#include "southbridge/sis/sis966/sis966_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -178,77 +175,9 @@
pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword);
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the sis966 */
- sis966_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-#if CONFIG_HAVE_FAILOVER_BOOT==1
- __asm__ volatile ("jmp __fallback_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- )
-#endif
- ;
-}
-#endif
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-#if CONFIG_HAVE_FAILOVER_BOOT==1
- #if CONFIG_USE_FAILOVER_IMAGE==1
- failover_process(bist, cpu_init_detectedx);
- #else
- real_main(bist, cpu_init_detectedx);
- #endif
-#else
- #if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
- #endif
- real_main(bist, cpu_init_detectedx);
-#endif
-}
-
#if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
@@ -264,6 +193,18 @@
int needs_reset = 0;
unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the sis966 */
+ sis966_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}