mb/intel/skylake/devicetree: Use comma separated list for arrays
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they will be moved
into the devicetree to their related root ports at some later point.
While on it, remove superfluous comments related to modified lines.
Change-Id: I769233a5baabbea920c9085f8008071ba34bb9dd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78598
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb
index 03ace20..fac1267 100644
--- a/src/mainboard/intel/kunimitsu/devicetree.cb
+++ b/src/mainboard/intel/kunimitsu/devicetree.cb
@@ -117,17 +117,21 @@
register "PcieRpClkReqNumber[0]" = "1"
register "PcieRpClkReqNumber[4]" = "2"
- register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port 1
- register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-C Port 2
- register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
- register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" # Type-A Port (card)
- register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera
- register "usb2_ports[8]" = "USB2_PORT_LONG(OC3)" # Type-A Port (board)
+ register "usb2_ports" = "{
+ [0] = USB2_PORT_TYPE_C(OC0), /* Type-C Port 1 */
+ [1] = USB2_PORT_TYPE_C(OC1), /* Type-C Port 2 */
+ [2] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */
+ [4] = USB2_PORT_MID(OC2), /* Type-A Port (card) */
+ [6] = USB2_PORT_FLEX(OC_SKIP), /* Camera */
+ [8] = USB2_PORT_LONG(OC3), /* Type-A Port (board) */
+ }"
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
- register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port (card)
- register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port (board)
+ register "usb3_ports" = "{
+ [0] = USB3_PORT_DEFAULT(OC0), /* Type-C Port 1 */
+ [1] = USB3_PORT_DEFAULT(OC1), /* Type-C Port 2 */
+ [2] = USB3_PORT_DEFAULT(OC2), /* Type-A Port (card) */
+ [3] = USB3_PORT_DEFAULT(OC3), /* Type-A Port (board) */
+ }"
register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V