blob: 989a0cb9417cb6d2ce73e49363349a524b774898 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
#include <arch/romstage.h>
#include <superio/ite/it8718f/it8718f.h>
#include <superio/ite/common/ite.h>
#include <northbridge/intel/x4x/iomap.h>
#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO)
#define EC_DEV PNP_DEV(0x2e, IT8718F_EC)
#define SUPERIO_DEV PNP_DEV(0x2e, 0)
/* Early mainboard specific GPIO setup.
* We should use standard gpio.h eventually
*/
static void mb_gpio_init(void)
{
pci_devfn_t dev;
/* Southbridge GPIOs. */
dev = PCI_DEV(0x0, 0x1f, 0x0);
/* Set the value for GPIO base address register and enable GPIO. */
pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1));
pci_write_config8(dev, GPIO_CNTL, 0x10);
setup_pch_gpios(&mainboard_gpio_map);
/* Set default GPIOs on superio */
ite_reg_write(GPIO_DEV, 0x25, 0x00);
ite_reg_write(GPIO_DEV, 0x26, 0xc7);
ite_reg_write(GPIO_DEV, 0x27, 0x80);
ite_reg_write(GPIO_DEV, 0x28, 0x41);
ite_reg_write(GPIO_DEV, 0x29, 0x0a);
ite_reg_write(GPIO_DEV, 0x2c, 0x01);
ite_reg_write(GPIO_DEV, 0x62, 0x08);
ite_reg_write(GPIO_DEV, 0x72, 0x00);
ite_reg_write(GPIO_DEV, 0x73, 0x00);
ite_reg_write(GPIO_DEV, 0xb8, 0x00);
ite_reg_write(GPIO_DEV, 0xbb, 0x40);
ite_reg_write(GPIO_DEV, 0xc0, 0x00);
ite_reg_write(GPIO_DEV, 0xc1, 0xc7);
ite_reg_write(GPIO_DEV, 0xc2, 0x80);
ite_reg_write(GPIO_DEV, 0xc3, 0x01);
ite_reg_write(GPIO_DEV, 0xc4, 0x0a);
ite_reg_write(GPIO_DEV, 0xc8, 0x00);
ite_reg_write(GPIO_DEV, 0xc9, 0x04);
ite_reg_write(GPIO_DEV, 0xcb, 0x00);
ite_reg_write(GPIO_DEV, 0xcc, 0x02);
ite_reg_write(GPIO_DEV, 0xf0, 0x10);
ite_reg_write(GPIO_DEV, 0xf1, 0x40);
ite_reg_write(GPIO_DEV, 0xf6, 0x26);
ite_reg_write(GPIO_DEV, 0xfc, 0x52);
ite_reg_write(EC_DEV, 0xf0, 0x80);
ite_reg_write(EC_DEV, 0xf1, 0x00);
ite_reg_write(EC_DEV, 0xf2, 0x0a);
ite_reg_write(EC_DEV, 0xf3, 0x80);
ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9
ite_reg_write(EC_DEV, 0x30, 0x01); // Enable
/* IRQ routing */
RCBA32(D31IP) = 0x00002210;
RCBA32(D30IP) = 0x00002100;
RCBA32(D29IP) = 0x10004321;
RCBA32(D28IP) = 0x00214321;
RCBA32(D27IP) = 0x00000001;
RCBA32(D31IR) = 0x00410032;
RCBA32(D29IR) = 0x32100237;
RCBA32(D27IR) = 0x00000000;
/* Enable IOAPIC */
RCBA8(OIC) = 0x03;
RCBA8(OIC);
RCBA32(GCS) = 0x00190464;
RCBA32(CG) = 0x00000000;
RCBA32(0x3430) = 0x00000001;
RCBA32(0x3e00) = 0xff000001;
RCBA32(0x3e08) = 0x00000080;
RCBA32(0x3e0c) = 0x00800000;
RCBA32(0x3e40) = 0xff000001;
RCBA32(0x3e48) = 0x00000080;
RCBA32(0x3e4c) = 0x00800000;
RCBA32(0x3f00) = 0x0000000b;
}
static void ich7_enable_lpc(void)
{
/* Disable Serial IRQ */
pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0x00);
/* Decode range */
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0010);
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN,
CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN | FDD_LPC_EN
| LPT_LPC_EN | COMA_LPC_EN | COMB_LPC_EN);
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x007c0291);
}
void mainboard_romstage_entry(void)
{
// ch0 ch1
const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
u8 boot_path = 0;
u8 s3_resume;
/* Set southbridge and Super I/O GPIOs. */
ich7_enable_lpc();
mb_gpio_init();
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
/* Disable SIO reboot */
ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
console_init();
enable_smbus();
x4x_early_init();
s3_resume = southbridge_detect_s3_resume();
if (s3_resume)
boot_path = BOOT_PATH_RESUME;
if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
boot_path = BOOT_PATH_WARM_RESET;
sdram_initialize(boot_path, spd_addrmap);
x4x_late_init(s3_resume);
printk(BIOS_DEBUG, "x4x late init complete\n");
}