blob: 0228499181b14d7851694ec9eb3632b76b7a8164 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
* Copyright (C) 2017 Arthur Heymans <arthur@aheymans.xyz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/pnp_ops.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include <arch/romstage.h>
#include <northbridge/intel/x4x/iomap.h>
#include <northbridge/intel/x4x/x4x.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/common/pmclib.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct6776/nct6776.h>
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#define SERIAL_DEV_R2 PNP_DEV(0x2e, NCT6776_SP1)
#define SERIAL_DEV_R1 PNP_DEV(0x2e, W83627DHG_SP1)
#define SUPERIO_DEV PNP_DEV(0x2e, 0)
#define LPC_DEV PCI_DEV(0, 0x1f, 0)
static void mb_lpc_setup(void)
{
u32 reg32;
/* Set the value for GPIO base address register and enable GPIO. */
pci_write_config32(LPC_DEV, GPIO_BASE, (DEFAULT_GPIOBASE | 1));
pci_write_config8(LPC_DEV, GPIO_CNTL, 0x10);
setup_pch_gpios(&mainboard_gpio_map);
/* Set GPIOs on superio, enable UART */
if (CONFIG(SUPERIO_NUVOTON_NCT6776)) {
nuvoton_pnp_enter_conf_state(SERIAL_DEV_R2);
pnp_set_logical_device(SERIAL_DEV_R2);
pnp_write_config(SERIAL_DEV_R2, 0x1c, 0x80);
pnp_write_config(SERIAL_DEV_R2, 0x27, 0x80);
pnp_write_config(SERIAL_DEV_R2, 0x2a, 0x60);
nuvoton_pnp_exit_conf_state(SERIAL_DEV_R2);
nuvoton_enable_serial(SERIAL_DEV_R2, CONFIG_TTYS0_BASE);
} else {
winbond_enable_serial(SERIAL_DEV_R1, CONFIG_TTYS0_BASE);
}
/* IRQ routing */
RCBA16(D31IR) = 0x0132;
RCBA16(D29IR) = 0x0237;
/* Enable IOAPIC */
RCBA8(OIC) = 0x03;
RCBA8(OIC);
reg32 = RCBA32(GCS);
reg32 |= (1 << 5);
RCBA32(GCS) = reg32;
RCBA32(CG) = 0x00000001;
}
static void ich7_enable_lpc(void)
{
pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0);
/* Decode range */
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF1_LPC_EN
| KBC_LPC_EN | LPT_LPC_EN | COMA_LPC_EN);
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x000c0291);
}
void mainboard_romstage_entry(void)
{
// ch0 ch1
const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
u8 boot_path = 0;
u8 s3_resume;
/* Set southbridge and Super I/O GPIOs. */
ich7_enable_lpc();
mb_lpc_setup();
console_init();
enable_smbus();
x4x_early_init();
s3_resume = southbridge_detect_s3_resume();
if (s3_resume)
boot_path = BOOT_PATH_RESUME;
if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
boot_path = BOOT_PATH_WARM_RESET;
sdram_initialize(boot_path, spd_addrmap);
x4x_late_init(s3_resume);
printk(BIOS_DEBUG, "x4x late init complete\n");
}