add framework for i440bx chipset
add support for NSC pc87351 SuperIO
add Bitworks/IMS manboard config

This is a very basic framework for the i440bx chipset and the 
Bitworks IMS board that uses it.  Most things are 
structure only.

Known issues:
- SMbus reads to the RAM SPD come back
all zero.
- dump_spd_registers() is commented out since it breaks with
the default setting of generic_dump_spd.c where it wants
2 memory controllers.



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/cpu/intel/socket_PGA370/Config.lb b/src/cpu/intel/socket_PGA370/Config.lb
new file mode 100644
index 0000000..8db263b
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/Config.lb
@@ -0,0 +1,3 @@
+config chip.h
+object socket_PGA370.o
+dir /cpu/intel/model_6xx
diff --git a/src/cpu/intel/socket_PGA370/chip.h b/src/cpu/intel/socket_PGA370/chip.h
new file mode 100644
index 0000000..469b662
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/chip.h
@@ -0,0 +1,4 @@
+extern struct chip_operations cpu_intel_socket_PGA370_ops;
+
+struct cpu_intel_socket_PGA370_config {
+};
diff --git a/src/cpu/intel/socket_PGA370/socket_PGA370.c b/src/cpu/intel/socket_PGA370/socket_PGA370.c
new file mode 100644
index 0000000..690e69d
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/socket_PGA370.c
@@ -0,0 +1,7 @@
+#include <device/device.h>
+#include "chip.h"
+
+
+struct chip_operations cpu_intel_socket_PGA370_ops = {
+	CHIP_NAME("socket PGA370")
+};
diff --git a/src/mainboard/bitworks/ims/Config.lb b/src/mainboard/bitworks/ims/Config.lb
new file mode 100644
index 0000000..357a101
--- /dev/null
+++ b/src/mainboard/bitworks/ims/Config.lb
@@ -0,0 +1,136 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+	default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+	depends "$(MAINBOARD)/failover.c ./romcc" 
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+	depends "$(MAINBOARD)/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E 
+	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc" 
+	action	"./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc 
+	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc    -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
+else
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds 
+	mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files 
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i440bx
+   device pci_domain 0 on 
+   end
+
+   chip cpu/intel/socket_PGA370
+   end
+
+end
+
diff --git a/src/mainboard/bitworks/ims/Options.lb b/src/mainboard/bitworks/ims/Options.lb
new file mode 100644
index 0000000..a67e149
--- /dev/null
+++ b/src/mainboard/bitworks/ims/Options.lb
@@ -0,0 +1,156 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_STREAM
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses CONFIG_UDELAY_TSC
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE  = 512*1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=0
+default IRQ_SLOT_COUNT=4
+#object irq_tables.o
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+default FALLBACK_SIZE = 131072
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+default _RAMBASE = 0x00004000
+
+default CONFIG_ROM_STREAM     = 1
+
+##
+## The default compiler
+##
+default CROSS_COMPILE=""
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable               
+## ALERT      2   action must be taken immediately 
+## CRIT       3   critical conditions              
+## ERR        4   error conditions                 
+## WARNING    5   warning conditions               
+## NOTICE     6   normal but significant condition 
+## INFO       7   informational                    
+## DEBUG      8   debug-level messages             
+## SPEW       9   Way too many details             
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=9
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=9
+
+default CONFIG_UDELAY_TSC=1
+
+end
+
diff --git a/src/mainboard/bitworks/ims/auto.c b/src/mainboard/bitworks/ims/auto.c
new file mode 100644
index 0000000..c841d61
--- /dev/null
+++ b/src/mainboard/bitworks/ims/auto.c
@@ -0,0 +1,154 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "southbridge/intel/i440bx/i440bx_early_smbus.c"
+#include "superio/NSC/pc87351/pc87351_early_serial.c"
+#include "northbridge/intel/i440bx/raminit.h"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#define SERIAL_DEV PNP_DEV(0x2e, PC87351_SP1)
+
+/*
+ */
+void udelay(int usecs) 
+{
+	int i;
+	for(i = 0; i < usecs; i++)
+		outb(i&0xff, 0x80);
+}
+
+#include "debug.c"
+#include "lib/delay.c"
+
+
+static void memreset_setup(void)
+{
+}
+
+/*
+  static void memreset(int controllers, const struct mem_controller *ctrl)
+  {
+  }
+*/
+
+
+static void enable_mainboard_devices(void) 
+{
+	device_t dev;
+	/* dev 0 for southbridge */
+  
+	dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+  
+	if (dev == PCI_DEV_INVALID) {
+		die("Southbridge not found!!!\n");
+	}
+	pci_write_config8(dev, 0x50, 7);
+	pci_write_config8(dev, 0x51, 0xff);
+#if 0
+	// This early setup switches IDE into compatibility mode before PCI gets 
+	// // a chance to assign I/Os
+	//         movl    $CONFIG_ADDR(0, 0x89, 0x42), %eax
+	//         //      movb    $0x09, %dl
+	//                 movb    $0x00, %dl
+	//                         PCI_WRITE_CONFIG_BYTE
+	//
+#endif
+	/* we do this here as in V2, we can not yet do raw operations 
+	 * to pci!
+	 */
+        dev += 0x100; /* ICKY */
+
+	pci_write_config8(dev, 0x42, 0);
+}
+
+static void enable_shadow_ram(void) 
+{
+	device_t dev = 0; /* no need to look up 0:0.0 */
+	unsigned char shadowreg;
+	/* dev 0 for southbridge */
+	shadowreg = pci_read_config8(dev, 0x63);
+	/* 0xf0000-0xfffff */
+	shadowreg |= 0x30;
+	pci_write_config8(dev, 0x63, shadowreg);
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	unsigned char c;
+	c = smbus_read_byte(device, address);
+	return c;
+}
+
+
+#include "northbridge/intel/i440bx/raminit.c"
+#include "sdram/generic_sdram.c"
+//#include "sdram/generic_dump_spd.c"
+
+static void main(unsigned long bist)
+{
+	static const struct mem_controller cpu[] = {
+		{
+		 .channel0 = {
+			 (0xa << 3) | 0,
+			 (0xa << 3) | 1,
+			 (0xa << 3) | 2, (0xa << 3) | 3,
+		 	},
+		 }
+	};
+	unsigned long x;
+	
+	if (bist == 0) {
+		early_mtrr_init();
+	}
+	pc87351_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+	
+	enable_smbus();
+//	dump_spd_registers(&cpu[0]);
+
+#if 0
+	enable_shadow_ram();
+	/*
+	  memreset_setup();
+	  this is way more generic than we need.
+	  sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+	*/
+	sdram_set_registers((const struct mem_controller *) 0);
+	sdram_set_spd_registers((const struct mem_controller *) 0);
+	sdram_enable(0, (const struct mem_controller *) 0);
+#endif
+	
+	/* Check all of memory */
+#if 0
+	ram_check(0x00000000, msr.lo);
+#endif
+#if 0
+	static const struct {
+		unsigned long lo, hi;
+	} check_addrs[] = {
+		/* Check 16MB of memory @ 0*/
+		{ 0x00000000, 0x01000000 },
+#if TOTAL_CPUS > 1
+		/* Check 16MB of memory @ 2GB */
+		{ 0x80000000, 0x81000000 },
+#endif
+	};
+	int i;
+	for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
+		ram_check(check_addrs[i].lo, check_addrs[i].hi);
+	}
+#endif
+}
diff --git a/src/mainboard/bitworks/ims/chip.h b/src/mainboard/bitworks/ims/chip.h
new file mode 100644
index 0000000..d0fe923
--- /dev/null
+++ b/src/mainboard/bitworks/ims/chip.h
@@ -0,0 +1,5 @@
+extern struct chip_operations mainboard_bitworks_ims_ops;
+
+struct mainboard_bitworks_ims_config {
+	int nothing;
+};
diff --git a/src/mainboard/bitworks/ims/cmos.layout b/src/mainboard/bitworks/ims/cmos.layout
new file mode 100644
index 0000000..5ba4c03
--- /dev/null
+++ b/src/mainboard/bitworks/ims/cmos.layout
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+1008         16      h       0        check_sum
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/src/mainboard/bitworks/ims/debug.c b/src/mainboard/bitworks/ims/debug.c
new file mode 100644
index 0000000..7eeabde
--- /dev/null
+++ b/src/mainboard/bitworks/ims/debug.c
@@ -0,0 +1,66 @@
+
+static void print_debug_pci_dev(unsigned dev)
+{
+	print_debug("PCI: ");
+	print_debug_hex8((dev >> 16) & 0xff);
+	print_debug_char(':');
+	print_debug_hex8((dev >> 11) & 0x1f);
+	print_debug_char('.');
+	print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		print_debug_pci_dev(dev);
+		print_debug("\r\n");
+	}
+}
+
+static void dump_pci_device(unsigned dev)
+{
+	int i;
+	print_debug_pci_dev(dev);
+	print_debug("\r\n");
+	
+	for(i = 0; i <= 255; i++) {
+		unsigned char val;
+		if ((i & 0x0f) == 0) {
+			print_debug_hex8(i);
+			print_debug_char(':');
+		}
+		val = pci_read_config8(dev, i);
+		print_debug_char(' ');
+		print_debug_hex8(val);
+		if ((i & 0x0f) == 0x0f) {
+			print_debug("\r\n");
+		}
+	}
+}
+
+static void dump_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		dump_pci_device(dev);
+	}
+}
diff --git a/src/mainboard/bitworks/ims/failover.c b/src/mainboard/bitworks/ims/failover.c
new file mode 100644
index 0000000..bdcb9ea
--- /dev/null
+++ b/src/mainboard/bitworks/ims/failover.c
@@ -0,0 +1,32 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+
+static unsigned long main(unsigned long bist)
+{
+	/* This is the primary cpu how should I boot? */
+	if (do_normal_boot()) {
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
+	}
+ normal_image:
+	asm volatile ("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm volatile ("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+	return bist;
+}
diff --git a/src/mainboard/bitworks/ims/irq_tables.c b/src/mainboard/bitworks/ims/irq_tables.c
new file mode 100644
index 0000000..894c27d
--- /dev/null
+++ b/src/mainboard/bitworks/ims/irq_tables.c
@@ -0,0 +1,32 @@
+/* This file was generated by getpir.c, do not modify! 
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE, /* u32 signature */
+	PIRQ_VERSION,   /* u16 version   */
+	32+16*5,        /* there can be total 5 devices on the bus */
+	0,              /* Where the interrupt router lies (bus) */
+	0x88,           /* Where the interrupt router lies (dev) */
+	0x1c20,         /* IRQs devoted exclusively to PCI usage */
+	0x1106,         /* Vendor */
+	0x8231,         /* Device */
+	0,              /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x5e,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		/* 8231 ethernet */
+		{0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0},
+		/* 8231 internal */
+		{0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0},
+		/* PCI slot */
+		{0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0},
+		{0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0},
+		{0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0},
+	}
+};
diff --git a/src/mainboard/bitworks/ims/mainboard.c b/src/mainboard/bitworks/ims/mainboard.c
new file mode 100644
index 0000000..28f46e7
--- /dev/null
+++ b/src/mainboard/bitworks/ims/mainboard.c
@@ -0,0 +1,12 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "chip.h"
+
+struct chip_operations mainboard_bitworks_ims_ops = {
+	CHIP_NAME("Bitworks IMS mainboard ")
+};
+
diff --git a/src/mainboard/bitworks/ims/reset.c b/src/mainboard/bitworks/ims/reset.c
new file mode 100644
index 0000000..5796e17
--- /dev/null
+++ b/src/mainboard/bitworks/ims/reset.c
@@ -0,0 +1,43 @@
+#if 0
+//#include "arch/romcc_io.h"
+#include <arch/io.h>
+
+typedef unsigned device_t;
+
+#define PCI_DEV(BUS, DEV, FN) ( \
+	(((BUS) & 0xFF) << 16) | \
+	(((DEV) & 0x1f) << 11) | \
+	(((FN)  & 0x7) << 8))
+
+static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
+{
+        unsigned addr;
+        addr = dev | where;
+        outl(0x80000000 | (addr & ~3), 0xCF8);
+        outb(value, 0xCFC + (addr & 3));
+}
+
+static void pci_write_config32(device_t dev, unsigned where, unsigned value)
+{
+	unsigned addr;
+        addr = dev | where;
+        outl(0x80000000 | (addr & ~3), 0xCF8);
+        outl(value, 0xCFC);
+}
+
+static unsigned pci_read_config32(device_t dev, unsigned where)
+{
+	unsigned addr;
+        addr = dev | where;
+        outl(0x80000000 | (addr & ~3), 0xCF8);
+        return inl(0xCFC);
+}
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
+}
+#endif
diff --git a/src/northbridge/intel/i440bx/Config.lb b/src/northbridge/intel/i440bx/Config.lb
new file mode 100644
index 0000000..4a0c2c8
--- /dev/null
+++ b/src/northbridge/intel/i440bx/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object northbridge.o
diff --git a/src/northbridge/intel/i440bx/chip.h b/src/northbridge/intel/i440bx/chip.h
new file mode 100644
index 0000000..b0b3b72
--- /dev/null
+++ b/src/northbridge/intel/i440bx/chip.h
@@ -0,0 +1,5 @@
+struct northbridge_intel_i440bx_config
+{
+};
+
+extern struct chip_operations northbridge_intel_i440bx_ops;
diff --git a/src/northbridge/intel/i440bx/northbridge.c b/src/northbridge/intel/i440bx/northbridge.c
new file mode 100644
index 0000000..ed262c2
--- /dev/null
+++ b/src/northbridge/intel/i440bx/northbridge.c
@@ -0,0 +1,186 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+#include "northbridge.h"
+
+/*
+*/
+static void northbridge_init(device_t dev) 
+{
+	printk_spew("Northbridge Init\n");
+}
+
+
+static struct device_operations northbridge_operations = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init             = northbridge_init,
+	.enable           = 0,
+	.ops_pci          = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+	.ops = &northbridge_operations,
+	.vendor = PCI_VENDOR_ID_INTEL,
+	.device = 0x7190, 
+};
+
+
+
+#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
+
+static void pci_domain_read_resources(device_t dev)
+{
+        struct resource *resource;
+
+        /* Initialize the system wide io space constraints */
+        resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
+        resource->limit = 0xffffUL;
+        resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+        /* Initialize the system wide memory resources constraints */
+        resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
+        resource->limit = 0xffffffffULL;
+        resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void ram_resource(device_t dev, unsigned long index,
+        unsigned long basek, unsigned long sizek)
+{
+        struct resource *resource;
+
+        if (!sizek) {
+                return;
+        }
+        resource = new_resource(dev, index);
+        resource->base  = ((resource_t)basek) << 10;
+        resource->size  = ((resource_t)sizek) << 10;
+        resource->flags =  IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
+                IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+static void tolm_test(void *gp, struct device *dev, struct resource *new)
+{
+	struct resource **best_p = gp;
+	struct resource *best;
+	best = *best_p;
+	if (!best || (best->base > new->base)) {
+		best = new;
+	}
+	*best_p = best;
+}
+
+static uint32_t find_pci_tolm(struct bus *bus)
+{
+	struct resource *min;
+	uint32_t tolm;
+	min = 0;
+	search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
+	tolm = 0xffffffffUL;
+	if (min && tolm > min->base) {
+		tolm = min->base;
+	}
+	return tolm;
+}
+
+static void pci_domain_set_resources(device_t dev)
+{
+	static const uint8_t ramregs[] = {
+		0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
+	};
+	device_t mc_dev;
+        uint32_t pci_tolm;
+
+        pci_tolm = find_pci_tolm(&dev->link[0]);
+	mc_dev = dev->link[0].children;
+	if (mc_dev) {
+		unsigned long tomk, tolmk;
+		unsigned char rambits;
+		int i, idx;
+
+		for(rambits = 0, i = 0; i < sizeof(ramregs)/sizeof(ramregs[0]); i++) {
+			unsigned char reg;
+			reg = pci_read_config8(mc_dev, ramregs[i]);
+			/* these are ENDING addresses, not sizes. 
+			 * if there is memory in this slot, then reg will be > rambits.
+			 * So we just take the max, that gives us total. 
+			 * We take the highest one to cover for once and future linuxbios
+			 * bugs. We warn about bugs.
+			 */
+			if (reg > rambits)
+				rambits = reg;
+			if (reg < rambits)
+				printk_err("ERROR! register 0x%x is not set!\n", 
+					ramregs[i]);
+		}
+		printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
+		tomk = rambits*8*1024;
+		/* Compute the top of Low memory */
+		tolmk = pci_tolm >> 10;
+		if (tolmk >= tomk) {
+			/* The PCI hole does does not overlap the memory.
+			 */
+			tolmk = tomk;
+		}
+		/* Report the memory regions */
+		idx = 10;
+		ram_resource(dev, idx++, 0, tolmk);
+	}
+	assign_resources(&dev->link[0]);
+}
+
+static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
+{
+        max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
+        return max;
+}
+
+static struct device_operations pci_domain_ops = {
+        .read_resources   = pci_domain_read_resources,
+        .set_resources    = pci_domain_set_resources,
+        .enable_resources = enable_childrens_resources,
+        .init             = 0,
+        .scan_bus         = pci_domain_scan_bus,
+};  
+
+static void cpu_bus_init(device_t dev)
+{
+        initialize_cpus(&dev->link[0]);
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+
+static struct device_operations cpu_bus_ops = {
+        .read_resources   = cpu_bus_noop,
+        .set_resources    = cpu_bus_noop,
+        .enable_resources = cpu_bus_noop,
+        .init             = cpu_bus_init,
+        .scan_bus         = 0,
+};
+
+static void enable_dev(struct device *dev)
+{
+        /* Set the operations if it is a special bus type */
+        if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+                dev->ops = &pci_domain_ops;
+		pci_set_method(dev);
+        }
+        else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+                dev->ops = &cpu_bus_ops;
+        }
+}
+
+struct chip_operations northbridge_intel_i440bx_ops = {
+	CHIP_NAME("Intel 440bx Northbridge")
+	.enable_dev = enable_dev, 
+};
diff --git a/src/northbridge/intel/i440bx/northbridge.h b/src/northbridge/intel/i440bx/northbridge.h
new file mode 100644
index 0000000..3e569bb
--- /dev/null
+++ b/src/northbridge/intel/i440bx/northbridge.h
@@ -0,0 +1,6 @@
+#ifndef NORTHBRIDGE_INTEL_440BX_H
+#define NORTHBRIDGE_INTEL_440BX_H
+
+extern unsigned int i440bx_scan_root_bus(device_t root, unsigned int max);
+
+#endif /* NORTHBRIDGE_INTEL_440BX_H */
diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c
new file mode 100644
index 0000000..737f2bf4
--- /dev/null
+++ b/src/northbridge/intel/i440bx/raminit.c
@@ -0,0 +1,399 @@
+#include <cpu/x86/mtrr.h>
+#include "raminit.h"
+
+/*
+This software and ancillary information (herein called SOFTWARE )
+called LinuxBIOS          is made available under the terms described
+here.  The SOFTWARE has been approved for release with associated
+LA-CC Number 00-34   .  Unless otherwise indicated, this SOFTWARE has
+been authored by an employee or employees of the University of
+California, operator of the Los Alamos National Laboratory under
+Contract No. W-7405-ENG-36 with the U.S. Department of Energy.  The
+U.S. Government has rights to use, reproduce, and distribute this
+SOFTWARE.  The public may copy, distribute, prepare derivative works
+and publicly display this SOFTWARE without charge, provided that this
+Notice and any statement of authorship are reproduced on all copies.
+Neither the Government nor the University makes any warranty, express 
+or implied, or assumes any liability or responsibility for the use of
+this SOFTWARE.  If SOFTWARE is modified to produce derivative works,
+such modified SOFTWARE should be clearly marked, so as not to confuse
+it with the version available from LANL.
+ */
+/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL
+ * rminnich@lanl.gov
+ */
+/*
+ * 11/26/02 - kevinh@ispiri.com - The existing comments implied that
+ * this didn't work yet.  Therefore, I've updated it so that it works
+ * correctly - at least on my VIA epia motherboard.  64MB DIMM in slot 0.
+ */
+
+/* Added automatic detection of first equipped bank and its MA mapping type.
+ * (Rest of configuration is done in C)
+ * 5/19/03 by SONE Takeshi <ts1@tsn.or.jp>
+ */
+/* converted to C 9/2003 Ron Minnich */
+
+/* Modified for the i440bx Richard Smith 01/2005 */
+
+/* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB
+ * frequency is 133MHz. If your CPU runs at another bus speed, you
+ * might need to change some of register values.
+ */
+#ifndef DIMM_PC133
+#define DIMM_PC133 0
+#endif
+
+// Set to 1 if your DIMMs are CL=2
+#ifndef DIMM_CL2
+#define DIMM_CL2 0
+#endif
+
+void dimms_read(unsigned long x) 
+{
+	uint8_t c;
+	unsigned long eax; 
+	volatile unsigned long y;
+	eax =  x;
+	for(c = 0; c < 6; c++) {
+		y = * (volatile unsigned long *) eax;
+		eax += 0x10000000;
+	}
+}
+
+void dimms_write(int x) 
+{
+	uint8_t c;
+	unsigned long eax = x;
+	for(c = 0; c < 6; c++) {
+		*(volatile unsigned long *) eax = 0;
+		eax += 0x10000000;
+	}
+}
+
+
+
+#ifdef DEBUG_SETNORTHB
+void setnorthb(device_t north, uint8_t reg, uint8_t val) 
+{
+	print_debug("setnorth: reg ");
+	print_debug_hex8(reg);
+	print_debug(" to ");
+	print_debug_hex8(val);
+	print_debug("\r\n");
+	pci_write_config8(north, reg, val);
+}
+#else
+#define setnorthb pci_write_config8
+#endif
+
+void
+dumpnorth(device_t north) 
+{
+	unsigned int r, c;
+	for(r = 0; ; r += 16) {
+		print_debug_hex8(r);
+		print_debug(":");
+		for(c = 0; c < 16; c++) {
+			print_debug_hex8(pci_read_config8(north, r+c));
+			print_debug(" ");
+		}
+		print_debug("\r\n");
+		if (r >= 240)
+			break;
+  }
+}
+
+static void sdram_set_registers(const struct mem_controller *ctrl) 
+{
+	device_t north = (device_t) 0;
+	uint8_t c, r;
+
+	print_err("vt8601 init starting\r\n");
+	north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
+	north = 0;
+	print_debug_hex32(north);
+	print_debug(" is the north\n");
+	print_debug_hex16(pci_read_config16(north, 0));
+	print_debug(" ");
+	print_debug_hex16(pci_read_config16(north, 2));
+	print_debug("\r\n");
+	
+	/* All we are doing now is setting initial known-good values that will
+	 * be revised later as we read SPD
+	 */	
+	// memory clk enable. We are not using ECC
+	pci_write_config8(north,0x78, 0x01);
+	print_debug_hex8(pci_read_config8(north, 0x78));
+	// dram control, see the book. 
+#if DIMM_PC133
+	pci_write_config8(north,0x68, 0x52);
+#else
+	pci_write_config8(north,0x68, 0x42);
+#endif
+	// dram control, see the book. 
+	pci_write_config8(north,0x6B, 0x0c);
+	// Initial setting, 256MB in each bank, will be rewritten later.
+	pci_write_config8(north,0x5A, 0x20);
+	print_debug_hex8(pci_read_config8(north, 0x5a));
+	pci_write_config8(north,0x5B, 0x40);
+	pci_write_config8(north,0x5C, 0x60);
+	pci_write_config8(north,0x5D, 0x80);
+	pci_write_config8(north,0x5E, 0xA0);
+	pci_write_config8(north,0x5F, 0xC0);
+	// It seems we have to take care of these 2 registers as if 
+	// they are bank 6 and 7.
+	pci_write_config8(north,0x56, 0xC0);
+	pci_write_config8(north,0x57, 0xC0);
+	
+	// SDRAM in all banks
+	pci_write_config8(north,0x60, 0x3F);
+	// DRAM timing. I'm suspicious of this
+	// This is for all banks, 64 is 0,1.  65 is 2,3. 66 is 4,5.
+	// ras precharge 4T, RAS pulse 5T
+	// cas2 is 0xd6, cas3 is 0xe6
+	// we're also backing off write pulse width to 2T, so result is 0xee
+#if DIMM_CL2
+	pci_write_config8(north,0x64, 0xd4);
+	pci_write_config8(north,0x65, 0xd4);
+	pci_write_config8(north,0x66, 0xd4);
+#else // CL=3
+	pci_write_config8(north,0x64, 0xe4);
+	pci_write_config8(north,0x65, 0xe4);
+	pci_write_config8(north,0x66, 0xe4);
+#endif
+
+	// dram frequency select.
+	// enable 4K pages for 64M dram. 
+#if DIMM_PC133
+	pci_write_config8(north,0x69, 0x3c);
+#else
+	pci_write_config8(north,0x69, 0xac);
+#endif
+
+	/* IMPORTANT -- disable refresh counter */
+	// refresh counter, disabled.
+	pci_write_config8(north,0x6A, 0x00);
+	
+
+	// clkenable configuration. kevinh FIXME - add precharge
+	pci_write_config8(north,0x6C, 0x00);
+	// dram read latch delay of 1 ns, MD drive 8 mA,
+	// high drive strength on MA[2:	13], we#, cas#, ras#
+	// As per Cindy Lee, set to 0x37, not 0x57
+	pci_write_config8(north,0x6D, 0x7f);
+}
+
+/* slot is the dram slot. Return size of side0 in lower 16-bit,
+ * side1 in upper 16-bit, in units of 8MB */
+static unsigned long 
+spd_module_size(unsigned char slot) 
+{ 
+	/* for all the DRAMS, see if they are there and get the size of each
+	 * module. This is just a very early first cut at sizing.
+	 */
+	/* we may run out of registers ... */
+	unsigned int banks, rows, cols, reg;
+	unsigned int value = 0;
+	/* unsigned int module = ((0x50 + slot) << 1) + 1; */
+	unsigned int module = 0x50 + slot;
+	/* is the module there? if byte 2 is not 4, then we'll assume it 
+	 * is useless. 
+	 */
+	print_info("Slot "); 
+	print_info_hex8(slot); 
+	if (smbus_read_byte(module, 2) != 4) {
+		print_info(" is empty\r\n");
+		return 0;
+	}
+	print_info(" is SDRAM ");
+	
+	banks = smbus_read_byte(module, 17);
+	/* we're going to assume symmetric banks. Sorry. */
+	cols = smbus_read_byte(module, 4)  & 0xf;
+	rows = smbus_read_byte(module, 3)  & 0xf;
+	/* grand total. You have rows+cols addressing, * times of banks, times
+	 * width of data in bytes */
+	/* Width is assumed to be 64 bits == 8 bytes */
+	value = (1 << (cols + rows)) * banks * 8;
+	print_info_hex32(value);
+	print_info(" bytes ");
+	/* Return in 8MB units */
+	value >>= 23;
+
+	/* We should have single or double side */
+	if (smbus_read_byte(module, 5) == 2) {
+		print_info("x2");
+		value = (value << 16) | value;
+	}
+	print_info("\r\n");
+	return value;
+
+}
+
+static int
+spd_num_chips(unsigned char slot) 
+{ 
+/*	unsigned int module = ((0x50 + slot) << 1) + 1; */
+	unsigned int module = 0x50 + slot;
+	unsigned int width;
+
+	width = smbus_read_byte(module, 13);
+	if (width == 0)
+		width = 8;
+	return 64 / width;
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+#define T133 7
+	unsigned char Trp = 1, Tras = 1, casl = 2, val;
+	unsigned char timing = 0xe4;
+	/* read Trp */
+	val = smbus_read_byte(0x50, 27);
+	if (val < 2*T133)
+		Trp = 1;
+	val = smbus_read_byte(0x50, 30);
+	if (val < 5*T133)
+		Tras = 0;
+	val = smbus_read_byte(0x50, 18);
+	if (val < 8)
+		casl = 1;
+	if (val < 4)
+		casl = 0;
+	
+	val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
+	
+	print_debug_hex8(val); print_debug(" is the computed timing\n");
+	/* don't set it. Experience shows that this screwy chipset should just
+	 * be run with the most conservative timing.
+	 * pci_write_config8(0, 0x64, val);
+	 */
+}
+
+static void set_ma_mapping(device_t north, int slot, int type)
+{
+    unsigned char reg, val;
+    int shift;
+
+    reg = 0x58 + slot/2;
+    if (slot%2 >= 1)
+        shift = 0;
+    else
+        shift = 4;
+
+    val = pci_read_config8(north, reg);
+    val &= ~(0xf << shift);
+    val |= type << shift;
+    pci_write_config8(north, reg, val);
+}
+
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl) 
+{
+	unsigned char i;
+	static const uint8_t ramregs[] = {
+		0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
+	};
+	device_t north = 0;
+	uint32_t size, base, slot, ma;
+	/* begin to initialize*/
+	// I forget why we need this, but we do
+	dimms_write(0xa55a5aa5);
+	
+	/* set NOP*/
+	pci_write_config8(north,0x6C, 0x01);
+	print_debug("NOP\r\n");
+	/* wait 200us*/
+	// You need to do the memory reference. That causes the nop cycle. 
+	dimms_read(0);
+	udelay(400);
+	print_debug("PRECHARGE\r\n");
+	/* set precharge */
+	pci_write_config8(north,0x6C, 0x02);
+	print_debug("DUMMY READS\r\n");
+	/* dummy reads*/
+	dimms_read(0);
+	udelay(200);
+	print_debug("CBR\r\n");
+	/* set CBR*/
+	pci_write_config8(north,0x6C, 0x04);
+	
+	/* do 8 reads and wait >100us between each - from via*/
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	dimms_read(0);
+	udelay(200);
+	print_debug("MRS\r\n");
+	/* set MRS*/
+	pci_write_config8(north,0x6c, 0x03);
+#if DIMM_CL2
+	dimms_read(0x150);
+#else // CL=3
+	dimms_read(0x1d0);
+#endif
+	udelay(200);
+	print_debug("NORMAL\r\n");
+	/* set to normal mode */
+	pci_write_config8(north,0x6C, 0x08);
+	
+	dimms_write(0x55aa55aa);
+	dimms_read(0);
+	udelay(200);
+	print_debug("set ref. rate\r\n");
+	// Set the refresh rate. 
+#if DIMM_PC133
+	pci_write_config8(north,0x6A, 0x86);
+#else
+	pci_write_config8(north,0x6A, 0x65);
+#endif
+	print_debug("enable multi-page open\r\n");
+	// enable multi-page open
+	pci_write_config8(north,0x6B, 0x0d);
+	
+	base = 0;
+	for(slot = 0; slot < 4; slot++) {
+		size = spd_module_size(slot);
+		/* side 0 */
+		base += size & 0xffff;
+		pci_write_config8(north, ramregs[2*slot], base);
+		/* side 1 */
+		base += size >> 16;
+		if (base > 0xff)
+			base = 0xff;
+		pci_write_config8(north, ramregs[2*slot + 1], base);
+
+		if (!size)
+			continue;
+
+		/* Calculate the value of MA mapping type register,
+		 * based on size of SDRAM chips. */
+		size = (size & 0xffff) << (3 + 3);
+			/* convert module size to be in Mbits */
+		size /= spd_num_chips(slot);
+		print_debug_hex16(size);
+		print_debug(" is the chip size\r\n");
+		if (size < 64)
+			ma = 0;
+		if (size < 256)
+			ma = 8;
+		else
+			ma = 0xe;
+		print_debug_hex16(ma);
+		print_debug(" is the MA type\r\n");
+		set_ma_mapping(north, slot, ma);
+	}
+	print_err("vt8601 done\r\n");
+}
diff --git a/src/northbridge/intel/i440bx/raminit.h b/src/northbridge/intel/i440bx/raminit.h
new file mode 100644
index 0000000..6e40683
--- /dev/null
+++ b/src/northbridge/intel/i440bx/raminit.h
@@ -0,0 +1,11 @@
+#ifndef RAMINIT_H
+#define RAMINIT_H
+
+#define DIMM_SOCKETS 4
+struct mem_controller {
+  device_t d0;
+  uint16_t channel0[DIMM_SOCKETS];
+};
+
+
+#endif /* RAMINIT_H */
diff --git a/src/southbridge/intel/i440bx/chip.h b/src/southbridge/intel/i440bx/chip.h
new file mode 100644
index 0000000..5952e38
--- /dev/null
+++ b/src/southbridge/intel/i440bx/chip.h
@@ -0,0 +1,13 @@
+#ifndef I440BX_CHIP_H
+#define I440BX_CHIP_H
+
+struct southbridge_intel_i440bx_config 
+{
+	unsigned int ide0_enable : 1;
+	unsigned int ide1_enable : 1;
+};
+
+struct chip_operations;
+extern struct chip_operations southbridge_intel_i440bx_ops;
+
+#endif /* I440BX_CHIP_H */
diff --git a/src/southbridge/intel/i440bx/i440bx_early_smbus.c b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
new file mode 100644
index 0000000..a3db7b8
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
@@ -0,0 +1,45 @@
+#include "i440bx_smbus.h"
+
+#define SMBUS_IO_BASE 0x0f00
+
+static void enable_smbus(void)
+{
+	device_t dev;
+	dev = pci_locate_device(PCI_ID(0x8086, 0x7113), 0);
+	if (dev == PCI_DEV_INVALID) {
+		die("SMBUS controller not found\r\n");
+	}
+	uint8_t enable;
+	print_spew("SMBus controller enabled\r\n");
+	pci_write_config32(dev, 0x90, SMBUS_IO_BASE );
+	// Enable and set SMBBus 
+	// 0x01 Interrupt to SMI# 
+	// (0x4<<1)|1 set interrupt to IRQ9
+	pci_write_config8(dev, 0xd2, (0x4<<1)|1);
+	
+	// Enable the IO space
+	pci_write_config16(dev, 0x04, 1);
+	
+	/* clear any lingering errors, so the transaction will run */
+	outb(0x1e, SMBUS_IO_BASE + SMBGSTATUS);
+}
+
+static int smbus_recv_byte(unsigned device)
+{
+	return do_smbus_recv_byte(SMBUS_IO_BASE, device);
+}
+
+static int smbus_send_byte(unsigned device, unsigned char val)
+{
+	return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
+static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+{
+	return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
+}
diff --git a/src/southbridge/intel/i440bx/i440bx_smbus.c b/src/southbridge/intel/i440bx/i440bx_smbus.c
new file mode 100644
index 0000000..9609e35
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_smbus.c
@@ -0,0 +1,43 @@
+/*
+ * (C) 2004 Linux Networx
+ * (C) 2005 Bitworks
+*/
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <arch/io.h>
+#include "i440bx.h"
+
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	pci_write_config32(dev, 0x44, 
+		((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+};
+
+static struct pci_operations lops_pci = {
+	.set_subsystem = lpci_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init             = 0,
+	.scan_bus         = scan_static_bus,
+	.enable           = i440bx_enable,
+	.ops_pci          = &lops_pci,
+	.ops_smbus_bus    = &lops_smbus_bus,
+};
+
+static struct pci_driver smbus_driver __pci_driver = {
+	.ops = &smbus_ops,
+	.vendor = PCI_VENDOR_ID_INTEL,
+	.device = PCI_DEVICE_INTEL_440BX_SMB,
+};
diff --git a/src/southbridge/intel/i440bx/i440bx_smbus.h b/src/southbridge/intel/i440bx/i440bx_smbus.h
new file mode 100644
index 0000000..9a100c0
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_smbus.h
@@ -0,0 +1,230 @@
+#include <device/smbus_def.h>
+
+#define SMBGSTATUS 0x0
+#define SMBGCTL    0x2
+#define SMBHSTCMD  0x3
+#define SMBHSTADDR 0x4
+#define SMBHSTDAT  0x5
+
+#define SMBUS_TIMEOUT (100*1000*10)
+#define SMBUS_STATUS_MASK 0x1e
+
+static inline void smbus_delay(void)
+{
+	outb(0x80, 0x80);
+	outb(0x80, 0x80);
+	outb(0x80, 0x80);
+	outb(0x80, 0x80);
+	outb(0x80, 0x80);
+	outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned char val;
+		smbus_delay();
+		val = inb(smbus_io_base + SMBGSTATUS);
+		if ((val & 0x1) == 0) {
+			break;
+		}
+		if(loops == (SMBUS_TIMEOUT / 2)) {
+			outw(inw(smbus_io_base + SMBGSTATUS), 
+				smbus_io_base + SMBGSTATUS);
+		}
+	} while(--loops);
+	return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned short val;
+		smbus_delay();
+		
+		val = inb(smbus_io_base + SMBGSTATUS);
+		// Make sure the command is done
+		if ((val & 0x1) != 0) { 
+			continue;
+		}
+		// Don't break out until one of the interrupt
+		// flags is set.
+		if (val & 0xfe) {
+			break;
+		}
+	} while(--loops);
+	return loops?0:SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+}
+
+static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
+{
+	unsigned global_status_register;
+	unsigned byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(0, smbus_io_base + SMBHSTCMD);
+	/* set up for a send byte */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* set the data word...*/
+	outw(0, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTDAT) & 0xff;
+
+	// Check for any result other than a command completion
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 1)) {
+		return SMBUS_ERROR;
+	}
+	return byte;
+}
+
+static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned value)
+{
+	unsigned global_status_register;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(0, smbus_io_base + SMBHSTCMD);
+	/* set up for a send byte */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* set the data word...*/
+	outw(value, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return 0;
+}
+
+
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+	unsigned global_status_register;
+	unsigned byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+
+	/* clear any lingering errors, so the transaction will run */
+	outb(0x1e, smbus_io_base + SMBGSTATUS);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+
+	/* clear the data word...*/
+	outb(0, smbus_io_base + SMBHSTDAT);
+
+	/* start a byte read with interrupts disabled */
+	outb( (0x02 << 2)|(1<<6), smbus_io_base + SMBGCTL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	/* read results of transaction */
+	byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return byte;
+}
+
+static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
+{
+	unsigned global_status_register;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+	outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+	/* set up for a byte data write */ /* FIXME */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* write the data word...*/
+	outw(val, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return 0;
+}
+
diff --git a/src/superio/NSC/pc87351/Config.lb b/src/superio/NSC/pc87351/Config.lb
new file mode 100644
index 0000000..f62a567
--- /dev/null
+++ b/src/superio/NSC/pc87351/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object superio.o
diff --git a/src/superio/NSC/pc87351/chip.h b/src/superio/NSC/pc87351/chip.h
new file mode 100644
index 0000000..6b62c54
--- /dev/null
+++ b/src/superio/NSC/pc87351/chip.h
@@ -0,0 +1,17 @@
+#ifndef SIO_COM1
+#define SIO_COM1_BASE   0x3F8
+#endif
+#ifndef SIO_COM2
+#define SIO_COM2_BASE   0x2F8
+#endif
+
+struct chip_operations;
+extern struct chip_operations superio_NSC_pc87351_ops;
+
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+struct superio_NSC_pc87351_config {
+	struct uart8250 com1, com2;
+	struct pc_keyboard keyboard;
+};
diff --git a/src/superio/NSC/pc87351/pc87351.h b/src/superio/NSC/pc87351/pc87351.h
new file mode 100644
index 0000000..dbed582
--- /dev/null
+++ b/src/superio/NSC/pc87351/pc87351.h
@@ -0,0 +1,9 @@
+#define PC87351_FDC  0x00 /* Floppy */
+#define PC87351_PP   0x01 /* Parallel port */
+#define PC87351_SP2  0x02 /* Com2 */
+#define PC87351_SP1  0x03 /* Com1 */
+#define PC87351_SWC  0x04 /* System wakeup control */
+#define PC87351_KBCM 0x05 /* Mouse */
+#define PC87351_KBCK 0x06 /* Keyboard */
+#define PC87351_GPIO 0x07 /* General purpose IO */
+#define PC87351_FSD  0x08 /* Fan speed device */
diff --git a/src/superio/NSC/pc87351/pc87351_early_serial.c b/src/superio/NSC/pc87351/pc87351_early_serial.c
new file mode 100644
index 0000000..7ec361e
--- /dev/null
+++ b/src/superio/NSC/pc87351/pc87351_early_serial.c
@@ -0,0 +1,10 @@
+#include <arch/romcc_io.h>
+#include "pc87351.h"
+
+static void pc87351_enable_serial(device_t dev, unsigned iobase)
+{
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+	pnp_set_enable(dev, 1);
+}
diff --git a/src/superio/NSC/pc87351/superio.c b/src/superio/NSC/pc87351/superio.c
new file mode 100644
index 0000000..a106d3a
--- /dev/null
+++ b/src/superio/NSC/pc87351/superio.c
@@ -0,0 +1,80 @@
+/* Copyright 2000  AG Electronics Ltd. */
+/* Copyright 2003-2004 Linux Networx */
+/* This code is distributed without warranty under the GPL v2 (see COPYING) */
+
+/* 
+ * Richard A Smith 
+ * I derived this code from the pc87360 device and removed the stuff the 87351
+ * dosen't do.
+*/
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pnp.h>
+#include <console/console.h>
+#include <string.h>
+#include <bitops.h>
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include "chip.h"
+#include "pc87351.h"
+
+static void init(device_t dev)
+{
+	struct superio_NSC_pc87351_config *conf;
+	struct resource *res0, *res1;
+	/* Wishlist handle well known programming interfaces more
+	 * generically.
+	 */
+	if (!dev->enabled) {
+		return;
+	}
+	conf = dev->chip_info;
+	switch(dev->path.u.pnp.device) {
+	case PC87351_SP1: 
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		init_uart8250(res0->base, &conf->com1);
+		break;
+	case PC87351_SP2:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		init_uart8250(res0->base, &conf->com2);
+		break;
+	case PC87351_KBCK:
+		res0 = find_resource(dev, PNP_IDX_IO0);
+		res1 = find_resource(dev, PNP_IDX_IO1);
+		init_pc_keyboard(res0->base, res1->base, &conf->keyboard);
+		break;
+	}
+}
+
+static struct device_operations ops = {
+	.read_resources   = pnp_read_resources,
+	.set_resources    = pnp_set_resources,
+	.enable_resources = pnp_enable_resources,
+	.enable           = pnp_enable,
+	.init             = init,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, PC87351_FDC,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07fa, 0}, },
+ { &ops, PC87351_PP,   PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x04f8, 0}, },
+ { &ops, PC87351_SP2,  PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, },
+ { &ops, PC87351_SP1,  PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, PC87351_SWC,  PNP_IO0 | PNP_IRQ0, { 0xfff0, 0 }, },
+ { &ops, PC87351_KBCM, PNP_IRQ0 },
+ { &ops, PC87351_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, },
+ { &ops, PC87351_GPIO, PNP_IO0 | PNP_IRQ0, { 0xfff8, 0 } },
+ { &ops, PC87351_FSD,  PNP_IO0 | PNP_IRQ0, { 0xfff8, 0 } },
+};
+
+
+static void enable_dev(struct device *dev)
+{
+	pnp_enable_devices(dev, &pnp_ops,
+		sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info);
+}
+
+struct chip_operations superio_NSC_pc87351_ops = {
+	CHIP_NAME("NSC 87351")
+	.enable_dev = enable_dev,
+};
diff --git a/targets/bitworks/ims/Config.lb b/targets/bitworks/ims/Config.lb
new file mode 100644
index 0000000..d81c110
--- /dev/null
+++ b/targets/bitworks/ims/Config.lb
@@ -0,0 +1,29 @@
+# Config file for the Bitworks ims board
+# This will make a target directory of ./ims
+
+target ims
+mainboard bitworks/ims
+
+option ROM_SIZE=524288
+
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Normal"
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebi
+	payload /etc/hosts
+end
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebia
+	payload /etc/hosts
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"