diff --git a/src/mainboard/google/corsola/panel.c b/src/mainboard/google/corsola/panel.c
new file mode 100644
index 0000000..0eb9420
--- /dev/null
+++ b/src/mainboard/google/corsola/panel.c
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <boardid.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <device/i2c_simple.h>
+#include <edid.h>
+#include <gpio.h>
+#include <soc/ddp.h>
+#include <soc/dsi.h>
+#include <soc/gpio_common.h>
+#include <soc/mtcmos.h>
+
+#include "gpio.h"
+#include "panel.h"
+
+void aw37503_init(unsigned int bus)
+{
+	i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x00, 0x14, 0x1F, 0);
+	i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x01, 0x14, 0x1F, 0);
+	i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x21, 0x4C, 0xFF, 0);
+	i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x03, 0x43, 0xFF, 0);
+	i2c_write_field(bus, PMIC_AW37503_SLAVE, 0x21, 0x00, 0xFF, 0);
+}
+
+bool is_pmic_aw37503(unsigned int bus)
+{
+	u8 vendor_id;
+	return (!i2c_read_field(bus, PMIC_AW37503_SLAVE,
+				0x04, &vendor_id, 0x0F, 0) && vendor_id == 0x01);
+}
+
+void backlight_control(void)
+{
+	/* Set up backlight control pins as output pin and power-off by default */
+	gpio_output(GPIO_AP_EDP_BKLTEN, 0);
+	gpio_output(GPIO_BL_PWM_1V8, 0);
+}
+
+struct panel_description *get_active_panel(void)
+{
+	/* Board-specific exceptions */
+	if (CONFIG(BOARD_GOOGLE_STEELIX) && board_id() < 2) /* Early builds use PS8640 */
+		return get_ps8640_description();
+
+	if (CONFIG(DRIVER_ANALOGIX_ANX7625))
+		return get_anx7625_description();
+
+	if (CONFIG(DRIVER_PARADE_PS8640))
+		return get_ps8640_description();
+
+	/* MIPI panels */
+	return get_panel_description();
+}