diff --git a/src/superio/ite/Makefile.mk b/src/superio/ite/Makefile.mk
index 23d86da..b6d0199 100644
--- a/src/superio/ite/Makefile.mk
+++ b/src/superio/ite/Makefile.mk
@@ -10,6 +10,7 @@
 subdirs-y += it8528e
 subdirs-y += it8613e
 subdirs-y += it8623e
+subdirs-y += it8629e
 subdirs-y += it8712f
 subdirs-y += it8718f
 subdirs-y += it8720f
diff --git a/src/superio/ite/it8629e/Kconfig b/src/superio/ite/it8629e/Kconfig
new file mode 100644
index 0000000..29e72b6
--- /dev/null
+++ b/src/superio/ite/it8629e/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config SUPERIO_ITE_IT8629E
+	bool
+	select SUPERIO_ITE_COMMON_PRE_RAM
+	select SUPERIO_ITE_ENV_CTRL
+	select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2
+	select SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG
+	select SUPERIO_ITE_ENV_CTRL_8BIT_PWM
+	select SUPERIO_ITE_ENV_CTRL_5FANS # TODO: Add support for 6 fans
+	select SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG
+	select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN
diff --git a/src/superio/ite/it8629e/Makefile.mk b/src/superio/ite/it8629e/Makefile.mk
new file mode 100644
index 0000000..c574158
--- /dev/null
+++ b/src/superio/ite/it8629e/Makefile.mk
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+ramstage-$(CONFIG_SUPERIO_ITE_IT8629E) += superio.c
diff --git a/src/superio/ite/it8629e/chip.h b/src/superio/ite/it8629e/chip.h
new file mode 100644
index 0000000..bad0266
--- /dev/null
+++ b/src/superio/ite/it8629e/chip.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef SUPERIO_ITE_IT8629E_CHIP_H
+#define SUPERIO_ITE_IT8629E_CHIP_H
+
+#include <superio/ite/common/env_ctrl_chip.h>
+
+struct superio_ite_it8629e_config {
+	struct ite_ec_config ec;
+};
+
+#endif /* SUPERIO_ITE_IT8629E_CHIP_H */
diff --git a/src/superio/ite/it8629e/it8629e.h b/src/superio/ite/it8629e/it8629e.h
new file mode 100644
index 0000000..573ca28
--- /dev/null
+++ b/src/superio/ite/it8629e/it8629e.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef SUPERIO_ITE_IT8629E_H
+#define SUPERIO_ITE_IT8629E_H
+
+#define IT8629E_FDC	0x00 // FDC
+#define IT8629E_SP1	0x01 // Serial Port 1
+#define IT8629E_SP2	0x02 // Serial Port 2
+#define IT8629E_PP	0x03 // Parallel Port
+#define IT8629E_EC	0x04 // Environment Controller
+#define IT8629E_KBCK	0x05 // PS/2 Keyboard
+#define IT8629E_KBCM	0x06 // PS/2 Mouse
+#define IT8629E_GPIO	0x07 // GPIO
+#define IT8629E_UNKNOWN	0x08
+#define IT8629E_IR	0x0a // Consumer IR
+
+#endif /* SUPERIO_ITE_IT8629E_H */
diff --git a/src/superio/ite/it8629e/superio.c b/src/superio/ite/it8629e/superio.c
new file mode 100644
index 0000000..51f7c22
--- /dev/null
+++ b/src/superio/ite/it8629e/superio.c
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <device/device.h>
+#include <device/pnp.h>
+#include <superio/conf_mode.h>
+#include <pc80/keyboard.h>
+#include <superio/ite/common/env_ctrl.h>
+
+#include "chip.h"
+#include "it8629e.h"
+
+static void it8629e_init(struct device *dev)
+{
+	const struct superio_ite_it8629e_config *conf = dev->chip_info;
+	const struct resource *res;
+
+	if (!dev->enabled)
+		return;
+
+	switch (dev->path.pnp.device) {
+	/* TODO: Might potentially need code for FDC etc. */
+	case IT8629E_EC:
+		res = probe_resource(dev, PNP_IDX_IO0);
+		if (!conf || !res)
+			break;
+		ite_ec_init(res->base, &conf->ec);
+		break;
+	case IT8629E_KBCK:
+		set_kbc_ps2_mode();
+		pc_keyboard_init(NO_AUX_DEVICE);
+		break;
+	}
+}
+
+static struct device_operations ops = {
+	.read_resources   = pnp_read_resources,
+	.set_resources    = pnp_set_resources,
+	.enable_resources = pnp_enable_resources,
+	.enable           = pnp_alt_enable,
+	.init             = it8629e_init,
+	.ops_pnp_mode     = &pnp_conf_mode_870155_aa,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+	{ NULL, IT8629E_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, 0x0ff8, },
+	{ NULL, IT8629E_SP1, PNP_IO0 | PNP_IRQ0, 0x0ff8, },
+	{ NULL, IT8629E_SP2, PNP_IO0 | PNP_IRQ0, 0x0ff8, },
+	{ NULL, IT8629E_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, 0x0ffc, },
+	{ NULL, IT8629E_EC, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x0ff8, 0x0ff8, },
+	{ NULL, IT8629E_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x0fff, 0x0fff, },
+	{ NULL, IT8629E_KBCM, PNP_IRQ0, },
+	{ NULL, IT8629E_GPIO, PNP_IO0 | PNP_IO1 | PNP_IO2 | PNP_IRQ0,
+		0x0fff, 0x0ff8, 0x0ff8, },
+	{ NULL, IT8629E_UNKNOWN, PNP_IO0 | PNP_IRQ0, 0xff8, },
+	{ NULL, IT8629E_IR, PNP_IO0 | PNP_IRQ0, 0x0ff8, },
+};
+
+static void enable_dev(struct device *dev)
+{
+	pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
+}
+
+struct chip_operations superio_ite_it8629e_ops = {
+	.name       = "ITE IT8629E Super I/O",
+	.enable_dev = enable_dev
+};