drivers/wwan/fm: Use RTD3 root port mutex for reset methods
The RTD3 driver should have its 'use_rp_mutex' set in the devicetree.
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the WWAN
The RTD3 RPMX mutex should be used in the reset Methods
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ic3fe20c56b67c2b5177f55f4845610087a30dc7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73381
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
diff --git a/src/drivers/wwan/fm/acpi_fm350gl.c b/src/drivers/wwan/fm/acpi_fm350gl.c
index df91389..46f8ecb 100644
--- a/src/drivers/wwan/fm/acpi_fm350gl.c
+++ b/src/drivers/wwan/fm/acpi_fm350gl.c
@@ -3,6 +3,7 @@
#include <acpi/acpigen.h>
#include <acpi/acpi_device.h>
#include "chip.h"
+#include "soc/intel/common/block/include/intelblocks/acpi.h"
#include "soc/intel/common/block/pcie/rtd3/chip.h"
/* FCPO# to RESET# delay time during WWAN ON */
@@ -56,6 +57,17 @@
{
acpigen_write_method_serialized("FHRF", 1);
{
+ char mutex_path[128];
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
+
+ rtd3_config = config_of(config->rtd3dev);
+ if (rtd3_config->use_rp_mutex) {
+ snprintf(mutex_path, sizeof(mutex_path), acpi_device_path_join(parent_dev,
+ RP_MUTEX_NAME));
+ /* Acquire root port mutex in case FHRF is called directly and not called from _RST */
+ acpigen_write_acquire(mutex_path, ACPI_MUTEX_NO_TIMEOUT);
+ }
+
/* LOCAL0 = PERST# */
acpigen_get_tx_gpio(&config->perst_gpio);
acpigen_write_if_lequal_op_int(LOCAL0_OP, 0);
@@ -97,6 +109,9 @@
acpigen_write_if_end(); /* If */
}
acpigen_pop_len(); /* Else */
+
+ if (rtd3_config->use_rp_mutex)
+ acpigen_write_release(mutex_path);
}
acpigen_write_method_end(); /* Method */
}
@@ -109,6 +124,17 @@
{
acpigen_write_method_serialized("SHRF", 0);
{
+ char mutex_path[128];
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
+
+ rtd3_config = config_of(config->rtd3dev);
+ if (rtd3_config->use_rp_mutex) {
+ snprintf(mutex_path, sizeof(mutex_path), acpi_device_path_join(parent_dev,
+ RP_MUTEX_NAME));
+ /* Acquire root port mutex */
+ acpigen_write_acquire(mutex_path, ACPI_MUTEX_NO_TIMEOUT);
+ }
+
/* call rtd3 method to Disable ModPHY Power Gating. */
if (wwan_fm350gl_get_rtd3_method_support(config) &
ACPI_PCIE_RP_EMIT_PSD0) {
@@ -137,6 +163,9 @@
"L23D"));
}
acpigen_write_sleep(FM350GL_TIME_HW_INIT);
+
+ if (rtd3_config->use_rp_mutex)
+ acpigen_write_release(mutex_path);
}
acpigen_write_method_end(); /* Method */
}
@@ -150,6 +179,17 @@
{
acpigen_write_method_serialized("_RST", 0);
{
+ char mutex_path[128];
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
+
+ rtd3_config = config_of(config->rtd3dev);
+ if (rtd3_config->use_rp_mutex) {
+ snprintf(mutex_path, sizeof(mutex_path), acpi_device_path_join(parent_dev,
+ RP_MUTEX_NAME));
+ /* Acquire root port mutex */
+ acpigen_write_acquire(mutex_path, ACPI_MUTEX_NO_TIMEOUT);
+ }
+
/* Perform 1st Half of FLDR Flow for soft reset: FHRF(0) */
acpigen_emit_namestring("FHRF");
acpigen_emit_byte(RESET_TYPE_WARM);
@@ -158,6 +198,9 @@
/* Indicates that the following _Off will be skipped. */
acpigen_emit_byte(INCREMENT_OP);
acpigen_emit_namestring(acpi_device_path_join(parent_dev, "RTD3.OFSK"));
+
+ if (rtd3_config->use_rp_mutex)
+ acpigen_write_release(mutex_path);
}
acpigen_write_method_end(); /* Method */
}
@@ -171,6 +214,17 @@
{
acpigen_write_method_serialized("_RST", 0);
{
+ char mutex_path[128];
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
+
+ rtd3_config = config_of(config->rtd3dev);
+ if (rtd3_config->use_rp_mutex) {
+ snprintf(mutex_path, sizeof(mutex_path), acpi_device_path_join(parent_dev,
+ RP_MUTEX_NAME));
+ /* Acquire root port mutex */
+ acpigen_write_acquire(mutex_path, ACPI_MUTEX_NO_TIMEOUT);
+ }
+
/* Perform 1st Half of FLDR Flow for cold reset: FHRF (1) */
acpigen_emit_namestring("FHRF");
acpigen_emit_byte(RESET_TYPE_COLD);
@@ -180,6 +234,9 @@
driver removal */
acpigen_emit_byte(INCREMENT_OP);
acpigen_emit_namestring(acpi_device_path_join(parent_dev, "RTD3.OFSK"));
+
+ if (rtd3_config->use_rp_mutex)
+ acpigen_write_release(mutex_path);
}
acpigen_write_method_end(); /* Method */
}
@@ -211,6 +268,7 @@
const struct drivers_wwan_fm_config *config = config_of(dev);
const struct device *parent = dev->bus->dev;
const char *scope = acpi_device_path(parent);
+ const struct soc_intel_common_block_pcie_rtd3_config *rtd3_config;
if (!is_dev_enabled(parent)) {
printk(BIOS_ERR, "%s: root port not enabled\n", __func__);
@@ -226,6 +284,12 @@
__func__, scope);
return;
}
+
+ rtd3_config = config_of(config->rtd3dev);
+ if (!rtd3_config->use_rp_mutex)
+ printk(BIOS_WARNING, "%s: RTD3 must use root port mutex.\n",
+ __func__);
+
printk(BIOS_INFO, "%s: Enable WWAN for %s (%s)\n", scope, dev_path(parent),
config->desc ?: dev->chip_ops->name);
acpigen_write_scope(scope);