mb/asus/p5qpl-am: Add p5g41t-m_lx as a variant
This board has more or less the same as the p5qpl-am except for DDR3
memory and different colors on the ports. Tested with Arch Linux with
kernel 4.20.0-arch1-1-ARCH.
What is tested and works:
- 800/1066/1333 MHz CPUs and DDR3 sticks at 800/1066 MHz
Some bugs are still present in the DDR3 raminit code though.
- Ethernet
- Internal programmer with both coreboot and stock firmware.
- PCI and PCIe x1 slots
- All USB ports
- S3 resume
- SATA ports
- PEG
- Rear audio output
Change-Id: I92cd15a245c4f1d8f57b304c9c3a37ba29c35431
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/27089
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/asus/p5qpl-am/devicetree.cb b/src/mainboard/asus/p5qpl-am/devicetree.cb
index f721f08..63ae8ce 100644
--- a/src/mainboard/asus/p5qpl-am/devicetree.cb
+++ b/src/mainboard/asus/p5qpl-am/devicetree.cb
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2017 Arthur Heymans <arthur@aheymans.xyz>
+# Copyright (C) 2019 Angel Pons <th3fanbus@gmail.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -24,7 +25,6 @@
end
end
device domain 0 on # PCI domain
- subsystemid 0x1043 0x836d inherit
device pci 0.0 on end # Host Bridge
device pci 1.0 on end # PEG
device pci 2.0 on end # Integrated graphics controller
@@ -46,76 +46,26 @@
register "sata_ahci" = "0x0" # AHCI not supported on this ICH7 variant
register "gpe0_en" = "0x04000440"
- device pci 1b.0 on end # Audio
- device pci 1c.0 on end # PCIe 1
+ device pci 1b.0 on end # Audio
+ device pci 1c.0 on end # PCIe 1: PCIe x1 slot
device pci 1c.1 on # PCIe 2: NIC
device pci 00.0 on
end
end
device pci 1c.2 off end # PCIe 3
device pci 1c.3 off end # PCIe 4
- device pci 1c.4 off end # PCIe 5
- device pci 1c.5 off end # PCIe 6
- device pci 1d.0 on end # USB
- device pci 1d.1 on end # USB
- device pci 1d.2 on end # USB
- device pci 1d.3 on end # USB
- device pci 1d.7 on end # USB
- device pci 1e.0 on end # PCI bridge
+ device pci 1d.0 on end # USB
+ device pci 1d.1 on end # USB
+ device pci 1d.2 on end # USB
+ device pci 1d.3 on end # USB
+ device pci 1d.7 on end # USB
+ device pci 1e.0 on end # PCI bridge
device pci 1e.2 off end # AC'97 Audio Controller
device pci 1e.3 off end # AC'97 Modem Controller
- device pci 1f.0 on # ISA bridge
- chip superio/winbond/w83627dhg
- device pnp 2e.0 off end # Floppy
- device pnp 2e.1 on # Parallel port
- # global
- irq 0x2c = 0x92
- # parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- drq 0x74 = 3
- end
- device pnp 2e.2 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 off end # COM2, IR
- device pnp 2e.5 on # Keyboard, mouse
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off end # SPI
- device pnp 2e.7 on end # GPIO6 (all input)
- device pnp 2e.8 off end # WDT0#, PLED
- device pnp 2e.9 off end # GPIO2
- device pnp 2e.109 on # GPIO3
- irq 0xf0 = 0xf3
-# irq 0xf1 = 0x08
- end
- device pnp 2e.209 on # GPIO4
- irq 0xf4 = 0x00
- end
- device pnp 2e.309 off end # GPIO5
- device pnp 2e.a on # ACPI
- irq 0x70 = 0
- irq 0xe4 = 0x10 # VSBGATE# to power dram during S3
- end
- device pnp 2e.b on # HWM, front pannel LED
- io 0x60 = 0x290
- irq 0x70 = 0
- end
- device pnp 2e.c on # PECI, SST
- irq 0xe0 = 0x10
- irq 0xe1 = 0x64
- irq 0xe8 = 0x01
- end
- end
- end
- device pci 1f.1 on end # PATA/IDE
- device pci 1f.2 on end # SATA
- device pci 1f.3 on end # SMbus
+ device pci 1f.0 on end # ISA bridge
+ device pci 1f.1 on end # PATA/IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMbus
end
end
end