mainboard/intel/baskingridge Fix usage of GNU field designator ext
Following the reasoning in,
8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension
In C99 we defined a syntax for this. GCC's old syntax was deprecated.
Change-Id: I61fe91e467c29f144323af9c4612420f322098b4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5826
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/mainboard/intel/baskingridge/romstage.c b/src/mainboard/intel/baskingridge/romstage.c
index ee516d9..e02ae7a 100644
--- a/src/mainboard/intel/baskingridge/romstage.c
+++ b/src/mainboard/intel/baskingridge/romstage.c
@@ -70,31 +70,31 @@
void mainboard_romstage_entry(unsigned long bist)
{
struct pei_data pei_data = {
- pei_version: PEI_VERSION,
- mchbar: DEFAULT_MCHBAR,
- dmibar: DEFAULT_DMIBAR,
- epbar: DEFAULT_EPBAR,
- pciexbar: DEFAULT_PCIEXBAR,
- smbusbar: SMBUS_IO_BASE,
- wdbbar: 0x4000000,
- wdbsize: 0x1000,
- hpet_address: HPET_ADDR,
- rcba: DEFAULT_RCBA,
- pmbase: DEFAULT_PMBASE,
- gpiobase: DEFAULT_GPIOBASE,
- temp_mmio_base: 0xfed08000,
- system_type: 0, // 0 Mobile, 1 Desktop/Server
- tseg_size: CONFIG_SMM_TSEG_SIZE,
- spd_addresses: { 0xa0, 0xa2, 0xa4, 0xa6 },
- ec_present: 0,
+ .pei_version = PEI_VERSION,
+ .mchbar = DEFAULT_MCHBAR,
+ .dmibar = DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 0, // 0 Mobile, 1 Desktop/Server
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 },
+ .ec_present = 0,
// 0 = leave channel enabled
// 1 = disable dimm 0 on channel
// 2 = disable dimm 1 on channel
// 3 = disable dimm 0+1 on channel
- dimm_channel0_disabled: 0,
- dimm_channel1_disabled: 0,
- max_ddr3_freq: 1600,
- usb2_ports: {
+ .dimm_channel0_disabled = 0,
+ .dimm_channel1_disabled = 0,
+ .max_ddr3_freq = 1600,
+ .usb2_ports = {
/* Length, Enable, OCn#, Location */
{ 0x0040, 1, 0, /* P0: Back USB3 port (OC0) */
USB_PORT_BACK_PANEL },
@@ -125,7 +125,7 @@
{ 0x0040, 1, 6, /* P13: USB/DP Jack (OC6) */
USB_PORT_FRONT_PANEL },
},
- usb3_ports: {
+ .usb3_ports = {
/* Enable, OCn# */
{ 1, 0 }, /* P1; */
{ 1, 0 }, /* P2; */