mb/asrock/h110m: use SSDT generator for SuperIO
Modifies the device tree to use the ACPI SSDT generator[1] for NCT6791D
SuperIO, dropping the need to include code from the superio.asl, which
was inherited from another chip (NCT6776) and required fixes. SSDT gen
support for Nuvoton NCT6791D chip was added in the previous patch [2].
[1] https://review.coreboot.org/c/coreboot/+/33033
[2] https://review.coreboot.org/c/coreboot/+/36379
Change-Id: I57b67d10968e5e035536bcb0d8329ce09d50194b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
diff --git a/src/mainboard/asrock/h110m/devicetree.cb b/src/mainboard/asrock/h110m/devicetree.cb
index b2a2d72..2d6b951 100644
--- a/src/mainboard/asrock/h110m/devicetree.cb
+++ b/src/mainboard/asrock/h110m/devicetree.cb
@@ -326,101 +326,108 @@
device pci 1e.6 off end # SDCard
device pci 1f.0 on # LPC bridge
subsystemid 0x1849 0x1a43
- chip superio/nuvoton/nct6791d
- device pnp 2e.0 off end # Floppy
- device pnp 2e.1 on
- # Global Control Registers
- # Device IRQ Polarity
- irq 0x13 = 0x00
- irq 0x14 = 0x00
- # Global Option
- irq 0x24 = 0xfb
- irq 0x27 = 0x10
- # Multi Function
- irq 0x1a = 0xb0
- irq 0x1b = 0xe6
- irq 0x2a = 0x04
- irq 0x2c = 0x40
- irq 0x2d = 0x03
- # Parallel Port
- io 0x60 = 0x0378
- irq 0x70 = 7
- drq 0x74 = 4 # No DMA
- irq 0xf0 = 0x3c # Printer mode
- end
- device pnp 2e.2 on # UART A
- io 0x60 = 0x03f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # IR
- io 0x60 = 0x02f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # PS/2 KBC
- io 0x60 = 0x0060
- io 0x62 = 0x0064
- irq 0x70 = 1 # Keyboard
- irq 0x72 = 12 # Mouse
- end
- device pnp 2e.6 off end # CIR
- device pnp 2e.7 on # GPIO6
- irq 0xf6 = 0xff
- irq 0xf7 = 0xff
- irq 0xf8 = 0xff
- end
- device pnp 2e.107 on # GPIO7
- irq 0xe0 = 0x7f
- irq 0xe1 = 0x0d
- end
- device pnp 2e.207 on # GPIO8
- irq 0xe6 = 0xff
- irq 0xe7 = 0xff
- irq 0xed = 0xff
- end
- device pnp 2e.8 off end # WDT
- device pnp 2e.108 on end # GPIO0
- device pnp 2e.308 off end # GPIO base
- device pnp 2e.408 off end # WDTMEM
- device pnp 2e.708 on end # GPIO1
- device pnp 2e.9 on end # GPIO2
- device pnp 2e.109 on # GPIO3
- irq 0xe4 = 0x7b
- irq 0xe5 = 0x02
- irq 0xea = 0x04
- end
- device pnp 2e.209 on # GPIO4
- irq 0xf0 = 0x7f
- irq 0xf1 = 0x80
- end
- device pnp 2e.309 on # GPIO5
- irq 0xf4 = 0xdf
- irq 0xf5 = 0xd5
- end
- device pnp 2e.a on
- # Power RAM in S3 and let the PCH
- # handle power failure actions
- irq 0xe4 = 0x70
- # Set HWM reset source to LRESET#
- irq 0xe7 = 0x01
- end # ACPI
- device pnp 2e.b on # HWM, LED
- io 0x60 = 0x0290
- io 0x62 = 0
- irq 0x70 = 0
- end
- device pnp 2e.d off end # BCLK, WDT2, WDT_MEM
- device pnp 2e.e off end # CIR wake-up
- device pnp 2e.f off end # GPIO PP/OD
- device pnp 2e.14 off end # SVID, Port 80 UART
- device pnp 2e.16 off end # DS5
- device pnp 2e.116 off end # DS3
- device pnp 2e.316 on end # PCHDSW
- device pnp 2e.416 off end # DSWWOPT
- device pnp 2e.516 on end # DS3OPT
- device pnp 2e.616 on end # DSDSS
- device pnp 2e.716 off end # DSPU
- end # superio/nuvoton/nct6791d
+ chip superio/common
+ device pnp 2e.0 on # passes SIO base addr to SSDT gen
+
+ chip superio/nuvoton/nct6791d
+ device pnp 2e.1 on
+ # Global Control Registers
+ # Device IRQ Polarity
+ irq 0x13 = 0x00
+ irq 0x14 = 0x00
+ # Global Option
+ irq 0x24 = 0xfb
+ irq 0x27 = 0x10
+ # Multi Function
+ irq 0x1a = 0xb0
+ irq 0x1b = 0xe6
+ irq 0x2a = 0x04
+ irq 0x2c = 0x40
+ irq 0x2d = 0x03
+
+ # Parallel Port
+ io 0x60 = 0x0378
+ irq 0x70 = 7
+ drq 0x74 = 4 # No DMA
+ irq 0xf0 = 0x3c # Printer mode
+ end
+ device pnp 2e.2 on # UART A
+ io 0x60 = 0x03f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # IR
+ io 0x60 = 0x02f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # PS/2 KBC
+ io 0x60 = 0x0060
+ io 0x62 = 0x0064
+ irq 0x70 = 1 # Keyboard
+ irq 0x72 = 12 # Mouse
+ end
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 on # GPIO6
+ irq 0xf6 = 0xff
+ irq 0xf7 = 0xff
+ irq 0xf8 = 0xff
+ end
+ device pnp 2e.107 on # GPIO7
+ irq 0xe0 = 0x7f
+ irq 0xe1 = 0x0d
+ end
+ device pnp 2e.207 on # GPIO8
+ irq 0xe6 = 0xff
+ irq 0xe7 = 0xff
+ irq 0xed = 0xff
+ end
+ device pnp 2e.8 off end # WDT
+ device pnp 2e.108 on end # GPIO0
+ device pnp 2e.308 off end # GPIO base
+ device pnp 2e.408 off end # WDTMEM
+ device pnp 2e.708 on end # GPIO1
+ device pnp 2e.9 on end # GPIO2
+ device pnp 2e.109 on # GPIO3
+ irq 0xe4 = 0x7b
+ irq 0xe5 = 0x02
+ irq 0xea = 0x04
+ end
+ device pnp 2e.209 on # GPIO4
+ irq 0xf0 = 0x7f
+ irq 0xf1 = 0x80
+ end
+ device pnp 2e.309 on # GPIO5
+ irq 0xf4 = 0xdf
+ irq 0xf5 = 0xd5
+ end
+ device pnp 2e.a on
+ # Power RAM in S3 and let the PCH
+ # handle power failure actions
+ irq 0xe4 = 0x70
+ # Set HWM reset source to LRESET#
+ irq 0xe7 = 0x01
+ end # ACPI
+ device pnp 2e.b on # HWM, LED
+ io 0x60 = 0x0290
+ io 0x62 = 0
+ irq 0x70 = 0
+ end
+ device pnp 2e.d off end # BCLK, WDT2, WDT_MEM
+ device pnp 2e.e off end # CIR wake-up
+ device pnp 2e.f off end # GPIO PP/OD
+ device pnp 2e.14 off end # SVID, Port 80 UART
+ device pnp 2e.16 off end # DS5
+ device pnp 2e.116 off end # DS3
+ device pnp 2e.316 on end # PCHDSW
+ device pnp 2e.416 off end # DSWWOPT
+ device pnp 2e.516 on end # DS3OPT
+ device pnp 2e.616 on end # DSDSS
+ device pnp 2e.716 off end # DSPU
+ end # chip superio/nuvoton/nct6791d
+
+ end # device pnp 2e.0
+ end # chip superio/common
+
chip drivers/pc80/tpm
device pnp 4e.0 on end # TPM module
end