mb/protectli/vault_cml: use combo v1/v2 FSP
Also switch configs to use combo v1/v2 FSP
The reason for this change is to simplify configuration - instead of
multiple targets for VP4630 and VP4650 or VP4670, it's now possible to
have one target covering all VP46x0.
Change-Id: I1a6f6e873e4ec35b9777dc17c0495151348d1d88
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81963
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/configs/config.protectli_cml_vp46xx b/configs/config.protectli_cml_vp46xx
new file mode 100644
index 0000000..1164232
--- /dev/null
+++ b/configs/config.protectli_cml_vp46xx
@@ -0,0 +1,13 @@
+CONFIG_VENDOR_PROTECTLI=y
+CONFIG_BOARD_PROTECTLI_VP46XX=y
+CONFIG_TPM_MEASURED_BOOT=y
+CONFIG_SMMSTORE_SIZE=0x40000
+CONFIG_TPM2=y
+CONFIG_POST_IO_PORT=0x80
+CONFIG_PAYLOAD_EDK2=y
+CONFIG_EDK2_BOOT_MANAGER_ESCAPE=y
+CONFIG_EDK2_BOOT_TIMEOUT=6
+CONFIG_EDK2_FOLLOW_BGRT_SPEC=y
+# CONFIG_EDK2_FULL_SCREEN_SETUP is not set
+CONFIG_EDK2_SD_MMC_TIMEOUT=10
+CONFIG_EDK2_SERIAL_SUPPORT=y