##
## This file is part of the coreboot project.
##
## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##

chip soc/intel/fsp_baytrail

	#### ACPI Register Settings ####
	register "fadt_pm_profile" = "PM_MOBILE"
	register "fadt_boot_arch"  = "ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042"

	#### FSP register settings ####
	register "PcdSataMode"             = "SATA_MODE_AHCI"
	register "PcdMrcInitSPDAddr1"      = "SPD_ADDR_DEFAULT"
	register "PcdMrcInitSPDAddr2"      = "SPD_ADDR_DEFAULT"
	register "PcdMrcInitMmioSize"      = "MMIO_SIZE_DEFAULT"
	register "PcdeMMCBootMode"         = "EMMC_FOLLOWS_DEVICETREE"
	register "PcdIgdDvmt50PreAlloc"    = "IGD_MEMSIZE_DEFAULT"
	register "PcdApertureSize"         = "APERTURE_SIZE_DEFAULT"
	register "PcdGttSize"              = "GTT_SIZE_DEFAULT"
	register "PcdLpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT"
	register "AzaliaAutoEnable"        = "AZALIA_FOLLOWS_DEVICETREE"
	register "LpeAcpiModeEnable"       = "LPE_ACPI_MODE_DISABLED"

	device cpu_cluster 0 on
		device lapic 0 on end
	end

	device domain 0 on
		device pci 00.0 on end	# 8086 0F00 - SoC router
		device pci 02.0 on end	# 8086 0F31 - GFX
		device pci 03.0 off end # 8086 0F38 - MIPI - camera interface

		device pci 10.0 off end	# 8086 0F14 - EMMC 4.1 Port (MMC1 pins) - (DO NOT USE) - Only 1 EMMC port at a time
		device pci 11.0 on end	# 8086 0F15 - SDIO Port (SD2 pins)
		device pci 12.0 on end	# 8086 0F16 - SD Port (SD3 pins)
		device pci 13.0 on end	# 8086 0F23 - SATA AHCI (0F20, 0F21, 0F22, 0F23)
		device pci 14.0 on end	# 8086 0F35 - USB XHCI - Only 1 USB controller at a time
		device pci 15.0 off end	# 8086 0F28 - LP Engine Audio
		device pci 16.0 off end # 8086 0F37 - OTG controller
		device pci 17.0 on end	# 8086 0F50 - EMMC 4.5 Port (MMC1 pins) - Only 1 EMMC port at a time
		device pci 18.0 on end	# 8086 0F40 - SIO - DMA
		device pci 18.1 on end	# 8086 0F41 -   I2C Port 1
		device pci 18.2 on end	# 8086 0F42 -   I2C Port 2
		device pci 18.3 on end	# 8086 0F43 -   I2C Port 3
		device pci 18.4 on end	# 8086 0F44 -   I2C Port 4
		device pci 18.5 on end	# 8086 0F45 -   I2C Port 5
		device pci 18.6 on end	# 8086 0F46 -   I2C Port 6
		device pci 18.7 on end	# 8086 0F47 -   I2C Port 7
		device pci 1a.0 on end	# 8086 0F18 - Trusted Execution Engine
		device pci 1b.0 on end	# 8086 0F04 - HD Audio
		device pci 1c.0 on 	# 8086 0F48 - PCIe Root Port 1 (x4 slot)
			device pci 0.0 on end	# 8086 1538 - Intel i210 MACPHY
		end
		device pci 1c.1 on end	# 8086 0F4A - PCIe Root Port 2 (half mini pcie slot)
		device pci 1c.2 on end	# 8086 0F4C - PCIe Root Port 3 (front x1 slot)
		device pci 1c.3 on end	# 8086 0F4E - PCIe Root Port 4 (rear x1 slot)
		device pci 1d.0 off end	# 8086 0F34 - USB EHCI - Only 1 USB controller at a time
		device pci 1e.0 on end	# 8086 0F06 - SIO - DMA
		device pci 1e.1 on end	# 8086 0F08 -   PWM 1
		device pci 1e.2 on end	# 8086 0F09 -   PWM 2
		device pci 1e.3 on end	# 8086 0F0A -   HSUART 1
		device pci 1e.4 on end	# 8086 0F0C -   HSUART 2
		device pci 1e.5 on end	# 8086 0F0E -   SPI
		device pci 1f.0 on end	# 8086 0F1C - LPC bridge
		device pci 1f.3 on end	# 8086 0F12 - SMBus 0
	end
end