SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.
Since the SB700 has changed to sb7xx_51xx, change legacy name in
other mainboard.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/gigabyte/ma785gmt/romstage.c b/src/mainboard/gigabyte/ma785gmt/romstage.c
index 7826661..d80df62 100644
--- a/src/mainboard/gigabyte/ma785gmt/romstage.c
+++ b/src/mainboard/gigabyte/ma785gmt/romstage.c
@@ -83,7 +83,7 @@
/* mov bsp to bus 0xff when > 8 nodes */
set_bsp_node_CHtExtNodeCfgEn();
enumerate_ht_chain();
- sb700_pci_port80();
+ sb7xx_51xx_pci_port80();
}
post_code(0x30);
@@ -96,14 +96,14 @@
post_code(0x32);
enable_rs780_dev8();
- sb700_lpc_init();
+ sb7xx_51xx_lpc_init();
it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
it8718f_disable_reboot();
uart_init();
#if CONFIG_USBDEBUG
- sb700_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
+ sb7xx_51xx_enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT);
early_usbdebug_init();
#endif
@@ -163,7 +163,7 @@
/* run _early_setup before soft-reset. */
rs780_early_setup();
- sb700_early_setup();
+ sb7xx_51xx_early_setup();
#if CONFIG_SET_FIDVID
msr = rdmsr(0xc0010071);
@@ -221,7 +221,7 @@
// die("After MCT init before CAR disabled.");
rs780_before_pci_init();
- sb700_before_pci_init();
+ sb7xx_51xx_before_pci_init();
post_code(0x42);
printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n");