| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* This file is part of the coreboot project. */ |
| |
| #ifndef SUPERIO_NUVOTON_NCT5104D_H |
| #define SUPERIO_NUVOTON_NCT5104D_H |
| |
| #include <device/pnp_type.h> |
| |
| /* SIO global configuration */ |
| #define IRQ_TYPE_SEL_CR10 0x10 /* UARTA,UARTB */ |
| #define IRQ_TYPE_SEL_CR11 0x11 /* SMI,UARTC,UARTD,WDTO */ |
| #define GLOBAL_OPTION_CR26 0x26 |
| #define CR26_LOCK_REG (1 << 4) /* required to access CR10/CR11 */ |
| |
| /* LDN 0x07 specific registers */ |
| #define NCT5104D_GPIO0_IO 0xE0 |
| #define NCT5104D_GPIO1_IO 0xE4 |
| #define NCT5104D_GPIO6_IO 0xF8 |
| |
| /* LDN 0x0F specific registers */ |
| #define NCT5104D_GPIO0_PP_OD 0xE0 |
| #define NCT5104D_GPIO1_PP_OD 0xE1 |
| #define NCT5104D_GPIO6_PP_OD 0xE6 |
| |
| /* Logical Device Numbers (LDN). */ |
| #define NCT5104D_FDC 0x00 /* FDC - not pinned out */ |
| #define NCT5104D_SP1 0x02 /* UARTA */ |
| #define NCT5104D_SP2 0x03 /* UARTB */ |
| #define NCT5104D_GPIO_PP_OD 0x0F /* GPIO Push-Pull / Open drain select */ |
| #define NCT5104D_SP3 0x10 /* UARTC */ |
| #define NCT5104D_SP4 0x11 /* UARTD */ |
| #define NCT5104D_PORT80 0x14 /* PORT 80 */ |
| |
| /* Virtual Logical Device Numbers (LDN) */ |
| #define NCT5104D_GPIO_V 0x07 /* GPIO - 0,1,6 Interface */ |
| #define NCT5104D_GPIO_WDT_V 0x08 /* GPIO/WDT Interface */ |
| |
| /* Virtual devices sharing the enables are encoded as follows: |
| VLDN = baseLDN[7:0] | [10:8] bitpos of enable in 0x30 of baseLDN |
| */ |
| #define NCT5104D_GPIO0 ((0 << 8) | NCT5104D_GPIO_V) |
| #define NCT5104D_GPIO1 ((1 << 8) | NCT5104D_GPIO_V) |
| #define NCT5104D_GPIO6 ((6 << 8) | NCT5104D_GPIO_V) |
| |
| #define NCT5104D_GPIO_WDT ((0 << 8) | NCT5104D_GPIO_WDT_V) |
| #define NCT5104D_GPIO_IO ((1 << 8) | NCT5104D_GPIO_WDT_V) |
| |
| void nct5104d_enable_uartd(pnp_devfn_t dev); |
| |
| #endif /* SUPERIO_NUVOTON_NCT5104D_H */ |