blob: d295a8d5808060ac765ee9b2fae9467866a6c6b7 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* The mainboard must define a PNOT method to handle power
* state notifications and Notify CPU device objects to
* re-evaluate their _PPC and _CST tables.
*/
// Mainboard specific throttle handler
External (\_TZ.THRT, MethodObj)
External (\_SB.DPTF.TEVT, MethodObj)
#ifdef DPTF_ENABLE_CHARGER
External (\_SB.DPTF.TCHG, DeviceObj)
#endif
External (\_SB.DPTF.TPET, MethodObj)
Device (EC0)
{
Name (_HID, EISAID ("PNP0C09"))
Name (_UID, 1)
Name (_GPE, EC_SCI_GPI)
Name (TOFS, EC_TEMP_SENSOR_OFFSET)
Name (TNCA, EC_TEMP_SENSOR_NOT_CALIBRATED)
Name (TNOP, EC_TEMP_SENSOR_NOT_POWERED)
Name (TBAD, EC_TEMP_SENSOR_ERROR)
Name (TNPR, EC_TEMP_SENSOR_NOT_PRESENT)
Name (DWRN, 15) // Battery capacity warning at 15%
Name (DLOW, 10) // Battery capacity low at 10%
OperationRegion (ERAM, EmbeddedControl, 0x00, EC_ACPI_MEM_MAPPED_BEGIN)
Field (ERAM, ByteAcc, Lock, Preserve)
{
Offset (0x00),
RAMV, 8, // EC RAM Version
TSTB, 8, // Test Byte
TSTC, 8, // Complement of Test Byte
KBLV, 8, // Keyboard Backlight value
FAND, 8, // Set Fan Duty Cycle
PATI, 8, // Programmable Auxiliary Trip Sensor ID
PATT, 8, // Programmable Auxiliary Trip Threshold
PATC, 8, // Programmable Auxiliary Trip Commit
CHGL, 8, // Charger Current Limit
TBMD, 1, // Tablet mode
// DFUD must be 0 for the other 31 values to be valid
Offset (0x0a),
DFUD, 1, // Device Features Undefined
FLSH, 1, // Flash commands present
PFAN, 1, // PWM Fan control present
KBLE, 1, // Keyboard Backlight present
LTBR, 1, // Lightbar present
LEDC, 1, // LED control
MTNS, 1, // Motion sensors present
KEYB, 1, // EC is keyboard controller
PSTR, 1, // Persistent storage
P80P, 1, // EC serves I/O Port 80h
THRM, 1, // EC supports thermal management
SBKL, 1, // Screen backlight switch present
WIFI, 1, // WIFI switch present
HOST, 1, // EC monitors host events (eg SCI, SMI)
GPIO, 1, // EC provides GPIO commands
I2CB, 1, // EC provides I2C controller access
CHRG, 1, // EC provides commands for charger control
BATT, 1, // Simply Battery support
SBAT, 1, // Smart Battery support
HANG, 1, // EC can detect host hang
PMUI, 1, // Power Information
DSEC, 1, // another EC exists downstream
UPDC, 1, // supports USB Power Delivery
UMUX, 1, // supports USB Mux
MSFF, 1, // Motion Sense has FIFO
TVST, 1, // supports temporary secure vstore
TCMV, 1, // USB Type C Muxing is virtual (host assisted)
RTCD, 1, // EC provides an RTC device
FPRD, 1, // EC provides a fingerprint reader device
TPAD, 1, // EC provides a touchpad device
RWSG, 1, // EC has RWSIG task enabled
DEVE, 1, // EC supports device events
// make sure we're within our space envelope
Offset (0x0e),
}
#if IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC_ACPI_MEMMAP)
OperationRegion (EMEM, EmbeddedControl,
EC_ACPI_MEM_MAPPED_BEGIN, EC_ACPI_MEM_MAPPED_SIZE)
Field (EMEM, ByteAcc, Lock, Preserve)
#else
OperationRegion (EMEM, SystemIO, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE)
Field (EMEM, ByteAcc, NoLock, Preserve)
#endif
{
#include "emem.asl"
}
#ifdef EC_ENABLE_LID_SWITCH
/* LID Switch */
Device (LID0)
{
Name (_HID, EisaId ("PNP0C0D"))
Method (_LID, 0)
{
Return (^^LIDS)
}
#ifdef EC_ENABLE_WAKE_PIN
Name (_PRW, Package () { EC_ENABLE_WAKE_PIN, 0x5 })
#endif
}
#endif
Method (TINS, 1, Serialized)
{
Switch (ToInteger (Arg0))
{
Case (0) { Return (TIN0) }
Case (1) { Return (TIN1) }
Case (2) { Return (TIN2) }
Case (3) { Return (TIN3) }
Case (4) { Return (TIN4) }
Case (5) { Return (TIN5) }
Case (6) { Return (TIN6) }
Case (7) { Return (TIN7) }
Case (8) { Return (TIN8) }
Case (9) { Return (TIN9) }
Default { Return (TIN0) }
}
}
Method (_CRS, 0, Serialized)
{
Name (ECMD, ResourceTemplate()
{
IO (Decode16,
EC_LPC_ADDR_ACPI_DATA,
EC_LPC_ADDR_ACPI_DATA,
0, 1)
IO (Decode16,
EC_LPC_ADDR_ACPI_CMD,
EC_LPC_ADDR_ACPI_CMD,
0, 1)
})
Return (ECMD)
}
Method (_REG, 2, NotSerialized)
{
// Initialize AC power state
Store (ACEX, \PWRS)
// Initialize LID switch state
Store (LIDS, \LIDS)
}
/* Read requested temperature and check against EC error values */
Method (TSRD, 1, Serialized)
{
Store (\_SB.PCI0.LPCB.EC0.TINS (Arg0), Local0)
/* Check for sensor not calibrated */
If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNCA)) {
Return (Zero)
}
/* Check for sensor not present */
If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNPR)) {
Return (Zero)
}
/* Check for sensor not powered */
If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNOP)) {
Return (Zero)
}
/* Check for sensor bad reading */
If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TBAD)) {
Return (Zero)
}
/* Adjust by offset to get Kelvin */
Add (\_SB.PCI0.LPCB.EC0.TOFS, Local0, Local0)
/* Convert to 1/10 Kelvin */
Multiply (Local0, 10, Local0)
Return (Local0)
}
// Lid Closed Event
Method (_Q01, 0, NotSerialized)
{
Store ("EC: LID CLOSE", Debug)
Store (LIDS, \LIDS)
#ifdef EC_ENABLE_LID_SWITCH
Notify (LID0, 0x80)
#endif
}
// Lid Open Event
Method (_Q02, 0, NotSerialized)
{
Store ("EC: LID OPEN", Debug)
Store (LIDS, \LIDS)
Notify (CREC, 0x2)
#ifdef EC_ENABLE_LID_SWITCH
Notify (LID0, 0x80)
#endif
}
// Power Button
Method (_Q03, 0, NotSerialized)
{
Store ("EC: POWER BUTTON", Debug)
Notify (\_SB.PWRB, 0x80)
}
// AC Connected
Method (_Q04, 0, NotSerialized)
{
Store ("EC: AC CONNECTED", Debug)
Store (ACEX, \PWRS)
Notify (AC, 0x80)
#ifdef DPTF_ENABLE_CHARGER
If (CondRefOf (\_SB.DPTF.TCHG)) {
Notify (\_SB.DPTF.TCHG, 0x80)
}
#endif
\PNOT ()
}
// AC Disconnected
Method (_Q05, 0, NotSerialized)
{
Store ("EC: AC DISCONNECTED", Debug)
Store (ACEX, \PWRS)
Notify (AC, 0x80)
#ifdef DPTF_ENABLE_CHARGER
If (CondRefOf (\_SB.DPTF.TCHG)) {
Notify (\_SB.DPTF.TCHG, 0x80)
}
#endif
\PNOT ()
}
// Battery Low Event
Method (_Q06, 0, NotSerialized)
{
Store ("EC: BATTERY LOW", Debug)
Notify (BAT0, 0x80)
}
// Battery Critical Event
Method (_Q07, 0, NotSerialized)
{
Store ("EC: BATTERY CRITICAL", Debug)
Notify (BAT0, 0x80)
}
// Battery Info Event
Method (_Q08, 0, NotSerialized)
{
Store ("EC: BATTERY INFO", Debug)
Notify (BAT0, 0x81)
}
// Thermal Overload Event
Method (_Q0A, 0, NotSerialized)
{
Store ("EC: THERMAL OVERLOAD", Debug)
Notify (\_TZ, 0x80)
}
// Thermal Event
Method (_Q0B, 0, NotSerialized)
{
Store ("EC: THERMAL", Debug)
Notify (\_TZ, 0x80)
}
// USB Charger
Method (_Q0C, 0, NotSerialized)
{
Store ("EC: USB CHARGER", Debug)
}
// Key Pressed
Method (_Q0D, 0, NotSerialized)
{
Store ("EC: KEY PRESSED", Debug)
Notify (CREC, 0x2)
}
// Thermal Shutdown Imminent
Method (_Q10, 0, NotSerialized)
{
Store ("EC: THERMAL SHUTDOWN", Debug)
Notify (\_TZ, 0x80)
}
// Battery Shutdown Imminent
Method (_Q11, 0, NotSerialized)
{
Store ("EC: BATTERY SHUTDOWN", Debug)
Notify (BAT0, 0x80)
}
// Throttle Start
Method (_Q12, 0, NotSerialized)
{
Store ("EC: THROTTLE START", Debug)
If (CondRefOf (\_TZ.THRT)) {
\_TZ.THRT (1)
}
}
// Throttle Stop
Method (_Q13, 0, NotSerialized)
{
Store ("EC: THROTTLE STOP", Debug)
If (CondRefOf (\_TZ.THRT)) {
\_TZ.THRT (0)
}
}
#ifdef EC_ENABLE_PD_MCU_DEVICE
// PD event
Method (_Q16, 0, NotSerialized)
{
Store ("EC: GOT PD EVENT", Debug)
Notify (ECPD, 0x80)
}
#endif
// Battery Status
Method (_Q17, 0, NotSerialized)
{
Store ("EC: BATTERY STATUS", Debug)
Notify (BAT0, 0x80)
}
// MKBP interrupt.
Method (_Q1B, 0, NotSerialized)
{
Store ("EC: MKBP", Debug)
Notify (CREC, 0x80)
}
// TABLET mode switch Event
Method (_Q1D, 0, NotSerialized)
{
Store ("EC: TABLET mode switch Event", Debug)
Notify (CREC, 0x2)
#ifdef EC_ENABLE_TABLET_EVENT
If (CondRefOf (\_SB.DPTF.TPET)) {
\_SB.DPTF.TPET()
}
Notify (TBMC, 0x80)
#endif
}
/*
* Dynamic Platform Thermal Framework support
*/
/* Mutex for EC PAT interface */
Mutex (PATM, 1)
/*
* Set Aux Trip Point 0
* Arg0 = Temp Sensor ID
* Arg1 = Value to set
*/
Method (PAT0, 2, Serialized)
{
If (Acquire (^PATM, 1000)) {
Return (0)
}
/* Set sensor ID */
Store (ToInteger (Arg0), ^PATI)
/* Temperature is passed in 1/10 Kelvin */
Divide (ToInteger (Arg1), 10, , Local1)
/* Adjust by EC temperature offset */
Subtract (Local1, ^TOFS, ^PATT)
/* Set commit value with SELECT=0 and ENABLE=1 */
Store (0x02, ^PATC)
Release (^PATM)
Return (1)
}
/*
* Set Aux Trip Point 1
* Arg0 = Temp Sensor ID
* Arg1 = Value to set
*/
Method (PAT1, 2, Serialized)
{
If (Acquire (^PATM, 1000)) {
Return (0)
}
/* Set sensor ID */
Store (ToInteger (Arg0), ^PATI)
/* Temperature is passed in 1/10 Kelvin */
Divide (ToInteger (Arg1), 10, , Local1)
/* Adjust by EC temperature offset */
Subtract (Local1, ^TOFS, ^PATT)
/* Set commit value with SELECT=1 and ENABLE=1 */
Store (0x03, ^PATC)
Release (^PATM)
Return (1)
}
/* Disable Aux Trip Points
* Arg0 = Temp Sensor ID
*/
Method (PATD, 1, Serialized)
{
If (Acquire (^PATM, 1000)) {
Return (0)
}
Store (ToInteger (Arg0), ^PATI)
Store (0x00, ^PATT)
/* Disable PAT0 */
Store (0x00, ^PATC)
/* Disable PAT1 */
Store (0x01, ^PATC)
Release (^PATM)
Return (1)
}
/*
* Thermal Threshold Event
*/
Method (_Q09, 0, NotSerialized)
{
If (Acquire (^PATM, 1000)) {
Return ()
}
/* Read sensor ID for event */
Store (^PATI, Local0)
/* When sensor ID returns 0xFF then no more events */
While (LNotEqual (Local0, EC_TEMP_SENSOR_NOT_PRESENT))
{
If (CondRefOf (\_SB.DPTF.TEVT)) {
\_SB.DPTF.TEVT (Local0)
}
/* Keep reaading sensor ID for event */
Store (^PATI, Local0)
}
Release (^PATM)
}
/*
* Set Charger Current Limit
* Arg0 = Current Limit in 64mA steps
*/
Method (CHGS, 1, Serialized)
{
Store (ToInteger (Arg0), ^CHGL)
}
/*
* Disable Charger Current Limit
*/
Method (CHGD, 0, Serialized)
{
Store (0xFF, ^CHGL)
}
/* Read current Tablet mode */
Method (RCTM, 0, NotSerialized)
{
Return (^TBMD)
}
#include "ac.asl"
#include "battery.asl"
#include "cros_ec.asl"
#ifdef EC_ENABLE_ALS_DEVICE
#include "als.asl"
#endif
#ifdef EC_ENABLE_KEYBOARD_BACKLIGHT
#include "keyboard_backlight.asl"
#endif
#ifdef EC_ENABLE_PD_MCU_DEVICE
#include "pd.asl"
#endif
#ifdef EC_ENABLE_TABLET_EVENT
#include "tbmc.asl"
#endif
}