printk_foo -> printk(BIOS_FOO, ...)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/southbridge/sis/sis966/sis966_nic.c b/src/southbridge/sis/sis966/sis966_nic.c
index 9fadcf9..6201736 100644
--- a/src/southbridge/sis/sis966/sis966_nic.c
+++ b/src/southbridge/sis/sis966/sis966_nic.c
@@ -75,12 +75,12 @@
outl(0x80001048,0xcf8);
outl((inl(0xcfc) & 0xfffffffd),0xcfc ); // enable IO78/79h for APC Index/Data
- printk_debug("MAC addr in APC = ");
+ printk(BIOS_DEBUG, "MAC addr in APC = ");
for(i = 0x9 ; i <=0xe ; i++)
{
- printk_debug("%2.2x",readApcByte(i));
+ printk(BIOS_DEBUG, "%2.2x",readApcByte(i));
}
- printk_debug("\n");
+ printk(BIOS_DEBUG, "\n");
/* Set APC Reload */
writeApcByte(0x7,readApcByte(0x7)&0xf7);
@@ -192,7 +192,7 @@
mdelay(20);
ulValue = read32(base+0x44);
} while((ulValue & SMI_REQUEST) != 0);
- //printk_debug("base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue);
+ //printk(BIOS_DEBUG, "base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue);
usData=(ulValue>>16);
@@ -227,7 +227,7 @@
if(!bFoundPhy)
{
- printk_debug("PHY not found !!!! \n");
+ printk(BIOS_DEBUG, "PHY not found !!!! \n");
}
*PhyAddr=PhyAddress;
@@ -270,15 +270,15 @@
if(!res)
{
- printk_debug("NIC Cannot find resource..\r\n");
+ printk(BIOS_DEBUG, "NIC Cannot find resource..\r\n");
return;
}
base = res->base;
- printk_debug("NIC base address %lx\n",base);
+ printk(BIOS_DEBUG, "NIC base address %lx\n",base);
if(!(val=phy_detect(base,&PhyAddr)))
{
- printk_debug("PHY detect fail !!!!\r\n");
+ printk(BIOS_DEBUG, "PHY detect fail !!!!\r\n");
return;
}
@@ -291,7 +291,7 @@
// if that is valid we will use that
- printk_debug("EEPROM contents %x \n",ReadEEprom( dev, base, 0LL));
+ printk(BIOS_DEBUG, "EEPROM contents %x \n",ReadEEprom( dev, base, 0LL));
for(i=0;i<3;i++) {
//status = smbus_read_byte(dev_eeprom, i);
ulValue=ReadEEprom( dev, base, i+3L);
@@ -302,7 +302,7 @@
}
}else{
// read MAC address from firmware
- printk_debug("EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue);
+ printk(BIOS_DEBUG, "EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue);
MacAddr[0]=read16(0xffffffc0); // mac address store at here
MacAddr[1]=read16(0xffffffc2);
MacAddr[2]=read16(0xffffffc4);