blob: 4efcc255ec1c4bab7de12174e6020735137f0e82 [file] [log] [blame]
chip northbridge/intel/gm45
# IGD Displays
register "gfx.ndid" = "3"
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
register "gpu_panel_power_up_delay" = "250" # T1+T2: 25ms
register "gpu_panel_power_down_delay" = "250" # T3: 25ms
register "gpu_panel_power_backlight_on_delay" = "2500" # T5: 250ms
register "gpu_panel_power_backlight_off_delay" = "2500" # Tx: 250ms
register "gpu_panel_power_cycle_delay" = "3" # T4: 200ms
register "gfx.use_spread_spectrum_clock" = "1"
device cpu_cluster 0 on
chip cpu/intel/socket_BGA956
device lapic 0 on end
end
chip cpu/intel/model_1067x
# Magic APIC ID to locate this chip
device lapic 0xACAC off end
# Enable Super LFM
register "slfm" = "1"
# Enable C5, C6
register "c5" = "1"
register "c6" = "1"
end
end
register "pci_mmio_size" = "2048"
device domain 0 on
device pci 00.0 on
subsystemid 0x17aa 0x20e0
end # host bridge
device pci 02.0 on # VGA
subsystemid 0x17aa 0x20e4
ioapic_irq 2 INTA 0x10
end
device pci 02.1 on
subsystemid 0x17aa 0x20e4
end # Display
device pci 03.0 on
subsystemid 0x17aa 0x20e6
end # ME
device pci 03.1 off end # ME
device pci 03.2 off end # ME
device pci 03.3 off end # ME
chip southbridge/intel/i82801ix
register "pirqa_routing" = "0x0b"
register "pirqb_routing" = "0x0b"
register "pirqc_routing" = "0x0b"
register "pirqd_routing" = "0x0b"
register "pirqe_routing" = "0x80"
register "pirqf_routing" = "0x80"
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x80"
register "gpi8_routing" = "2"
register "gpe0_en" = "0x01000000"
register "gpi1_routing" = "2"
# Set AHCI mode, enable ports 1 and 2.
register "sata_port_map" = "0x03"
register "sata_clock_request" = "0"
register "sata_traffic_monitor" = "0"
# Set c-state support
register "c4onc3_enable" = "1"
register "c5_enable" = "1"
register "c6_enable" = "1"
# Set thermal throttling to 75%.
register "throttle_duty" = "THTL_75_0"
# Enable PCIe ports 1,2,4 as slots (Mini * PCIe).
register "pcie_slot_implemented" = "0xb"
# Set power limits to 10 * 10^0 watts.
# Maybe we should set less for Mini PCIe.
register "pcie_power_limits" = "{ { 10, 0 }, { 10, 0 }, { 0, 0 }, { 10, 0 }, { 0, 0 }, { 0, 0 } }"
register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }"
register "gen1_dec" = "0x007c1601"
register "gen2_dec" = "0x000c15e1"
register "gen3_dec" = "0x001c1681"
device pci 19.0 on end # LAN
device pci 1a.0 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTA 0x10
end
device pci 1a.1 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTB 0x11
end
device pci 1a.2 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTC 0x12
end
device pci 1a.7 on # EHCI
subsystemid 0x17aa 0x20f1
ioapic_irq 2 INTC 0x12
end
device pci 1b.0 on # HD Audio
subsystemid 0x17aa 0x20f2
ioapic_irq 2 INTA 0x10
end
device pci 1c.0 on # PCIe Port #1
subsystemid 0x17aa 0x20f3 # WWAN
ioapic_irq 2 INTA 0x10
end
device pci 1c.1 on
subsystemid 0x17aa 0x20f3 # WLAN
end # PCIe Port #2
device pci 1c.2 on
subsystemid 0x17aa 0x20f3 # UWB
end # PCIe Port #3
device pci 1c.3 on
subsystemid 0x17aa 0x20f3 # Expresscard
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
end # PCIe Port #4
device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6
device pci 1d.0 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTA 0x10
end
device pci 1d.1 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTB 0x11
end
device pci 1d.2 on # UHCI
subsystemid 0x17aa 0x20f0
ioapic_irq 2 INTC 0x12
end
device pci 1d.7 on # EHCI
subsystemid 0x17aa 0x20f1
ioapic_irq 2 INTA 0x10
end
device pci 1e.0 on # PCI
subsystemid 0x17aa 0x20f4
end
device pci 1f.0 on # LPC bridge
subsystemid 0x17aa 0x20f5
chip drivers/generic/ioapic
register "have_isa_interrupts" = "1"
register "irq_on_fsb" = "1"
register "enable_virtual_wire" = "1"
register "base" = "(void *)0xfec00000"
device ioapic 2 on end
end
chip ec/lenovo/pmh7
device pnp ff.1 on # dummy
end
register "backlight_enable" = "0x01"
register "dock_event_enable" = "0x01"
end
chip ec/lenovo/h8
device pnp ff.2 on # dummy
io 0x60 = 0x62
io 0x62 = 0x66
io 0x64 = 0x1600
io 0x66 = 0x1604
end
register "config0" = "0xa6"
register "config1" = "0x04"
register "config2" = "0xa0"
register "config3" = "0x01"
register "beepmask0" = "0xfe"
register "beepmask1" = "0x96"
register "has_power_management_beeps" = "1"
register "has_uwb" = "1"
register "event2_enable" = "0xff"
register "event3_enable" = "0xff"
register "event4_enable" = "0xf4"
register "event5_enable" = "0x3c"
register "event6_enable" = "0x80"
register "event7_enable" = "0x01"
register "event8_enable" = "0x01"
register "event9_enable" = "0xff"
register "eventa_enable" = "0xff"
register "eventb_enable" = "0xff"
register "eventc_enable" = "0xff"
register "eventd_enable" = "0xff"
register "has_bdc_detection" = "1"
register "bdc_gpio_num" = "7"
register "bdc_gpio_lvl" = "0"
end
chip superio/nsc/pc87382
device pnp 164e.3 on # Digitizer
io 0x60 = 0x200
irq 0x29 = 0xb0
irq 0x70 = 0x5
irq 0xf0 = 0x82
end
# IR, not connected
device pnp 164e.2 off end
# GPIO, not connected
device pnp 164e.7 off end
# DLPC, not connected
device pnp 164e.19 off end
end
end
device pci 1f.2 on # SATA/IDE 1
subsystemid 0x17aa 0x20f8
ioapic_irq 2 INTB 0x11
end
device pci 1f.3 on # SMBus
subsystemid 0x17aa 0x20f9
ioapic_irq 2 INTC 0x12
# eeprom, 8 virtual devices, same chip
chip drivers/i2c/at24rf08c
device i2c 54 on end
device i2c 55 on end
device i2c 56 on end
device i2c 57 on end
device i2c 5c on end
device i2c 5d on end
device i2c 5e on end
device i2c 5f on end
end
end
device pci 1f.5 off end # SATA/IDE 2
device pci 1f.6 off end # Thermal
end
end
end